Search results

Currently building a 24' X 30' detached garage and need some advice on heating it. Here are some specs for the garage: - 2x6 construction, wrapped and insulated - 12' ceiling with insulation between upper & lower levels. - Storage trusses will allow about 6' clearance at peak in upper level -...

I am planning to have a 100 amp sub panel in the new garage fed from the 200 amp main panel in my house. The neutral and ground bars are bonded in the main panel and whoever wired it has neutral and ground wires connected to both bars. The only open terminals that would accept the wires going to...

If you're thinking about coating your concrete floor, I highly recommend Legacy Industrial products and this gallon of primer will save you some money. I purchased a garage floor kit from Legacy Industrial and used only 2 of the 3 gallons of epoxy primer. This is the standard epoxy primer in...

NEW PRICE - Legacy Industrial Standard Epoxy Primer/Coating This is a great deal! I need to get this off of my workbench. I recently purchased a garage floor kit from Legacy Industrial and used only 2 of the 3 gallons of epoxy primer. This is the standard epoxy primer in medium gray. Includes...

Hard to believe that I started this project about 9 months ago. First I rented a machine from Home Depot with the Diamabrush tool but it wouldn't touch the old coating on the floor. I ended up on my hands & knees with a 7' Diamabrush tool on a hand grinder. I finished removing the old coating...

I am getting ready to put down the Legacy Nohr-S pigmented kit. Weather in Ohio has been wet and I am struggling to find a dry stretch to clear my garage out to get it done. I thought about doing half the floor at a time but ruled that out. Now I am considering doing just the primer on one...

I started working on my garage floor last fall. It had an old epoxy coating which was more difficult to remove than I expected. Ended up using a Diamabrush tool on a 9" grinder. I got about 2/3 of the floor stripped before cold weather set in and I am finishing it up now. My question is about...

I have a oval shaped low area (about 18" X 24" X 1/4" deep) that collects water if I wash a car inside or from rain/melting snow dripping from a car. Since I am working towards putting new coating on my garage floor I am considering filling this area. Originally I planned on leaving it alone...

I am putting my plan together to epoxy coat on my garage floor. The floor has an old coating of paint which will need to be removed. I bought a 7” diamabrush for my side grinder and plan to chip away at the old paint as time permits. I want to fill the contraction joints prior to coating the...

I have been reading up on Racedeck flooring and I haven't seen any mention of using an engine hoist (cherry picker) or a floor jack. Just wondering how the small steel wheels roll on the Racedeck tiles when they are loaded with the weight of a car or an engine.