Search results

kee klamp. Cheapest on line I found was hawkeye material handling, Iowa, or ebay. But these are for PIPE. That's what handrails are made of.

Me too. One at the door, uses a 9 volt Battery, the other plugs in. Old school.

He's the 4th jack.

There's about 10 different n80 models. And that's what works for my model. why don't you go top the bostitch servicenet site, and look up your gun & manual. Then you'll know more than you do now.

yes. change the pressure that the compressor puts out. more pressure= deeper driven nails. less pressure sinks the nails less.

I use my 28v Milwaukee bandsaw about once a week.

Since it's a shed, and you'll be making new doors, I'd suggest using regular hinges available anywhere, or barn style hinges.

5 years or more. when they're old they won't hold a charge, and the capacity is reduced. And they don't like cold. when they're old they say they're fully charged , but they're not. You'll be back in business when you buy a new one. I have the whole Milwaukee line up, and some tools have...

For me a plow on a garden tractor was also useless. Then I modified that plow to go on a 4 wd quad, and modified it some more to power angle, added 4 chains.. Now you can call me Plow king. ( or Mr plow) But you really need a short wheel base dedicated plow vehicle , just for plowing...

Take a picture of the circuit box with the door open. I've seen some old weird square d boxes where the main only turns off about half the breakers. They were designed that way, but I don't know why. I'd definitely pull the meter , at some point.

I have some new MIkwaukee lithium ion batteries that were never charged and are garbage cause they won't take a charge.

You might also have some batteries that are too old to hold a full charge, even though the led lights might say otherwise.

sheesh, You're right, I converted mine to twelve volts and wasn't worried about mine catching on fire when my kids used it. That could be due to my knowledge about electrical things.

Mine's are 25 years old. I'd wait.

You won't need that when to upgrade to 12 volts!

problem solved.

circuit boards are fried. Take the good board out and swap in the other two, that will convince you that you need 2 new circuit boards.

Wire wheel in an air drill. and then I'd paint the lip with just about any spray paint, if needed. I almost never use bead sealer. It's a bandaid, or a shortcut..