Search results

Ok. I got an electrician to come out and wire the shop portion so far. Inspector is coming 6/4. Electrician told me that the mc cable between the frame and metal siding might not be "supported" according to the inspector. Since it's not supported every 18". Anyone have any ideas since my frame...

Thank you! Sent from my SM-G930V using Tapatalk

Ah ok sorry it says ground strap where the green screw is. The other without the screw says nuetral strap. Sent from my SM-G930V using Tapatalk

Looks like nuetral bar screw is not installed. Sent from my SM-G930V using Tapatalk

Is this coreect? Sent from my SM-G930V using Tapatalk

I did not isolate neutral bar what do I need to do. Sent from my SM-G930V using Tapatalk

I have everything ran. The 2224 ser cable up the wall through rafters back down the wall and then ran under the house. For my grounding in the shop (all steel building (enclosed carport)) I need size 8 copper wire or 6 aluminum. I run that wire from the ground bar in the panel to the 2 ground...

Thanks. For your supports for the wall. What did you use for the horizontal supports? 2x3s then some metal brackets? Thanks. Sorry for the questions. First metal building like mine with similar ideas. Sent from my SM-G930V using Tapatalk

Ok. Thank you. I'll probably stick with the 12" just to make it easier. Sent from my SM-G930V using Tapatalk

Sorry he just texted me hes getting me #2 ser. Sent from my SM-G930V using Tapatalk

Ok, small update I ordered some 1/0 1/0 1/0 2 SER cable to run from the underground attachment through the garage and under the house. I'm going to get a 8" or 12" junction box to connect the wires together in using Polaris connectors. Next step is to run the 4th ground wire to the shop and then...

Looks good, I have a 24x30 metal shop too. I like how you insulated the walls and such. How did you wire up your compressor outlet and your welder outlet? I'm at that point in my shop now, getting power to the building. Do you have any problems with moisture?

I understand now. I really really appreciate yours and everybody's help! Thank you! Sent from my SM-G930V using Tapatalk

Thank you. I think I have everything.. breaker for the main at 100amps then (2/0) wire goes in there. Then the 100amp breaker I'll use with the panel (2226 al). Sent from my SM-G930V using Tapatalk

Ok thank you! Any suggestions on connectors from 2226 to 2/0 2/0 2/0 1? Sent from my SM-G930V using Tapatalk

Yeah that's what I'm afraid of. Not looking forward to a whole house re-wire. Sent from my SM-G930V using Tapatalk

So could I use the current urd cable in the conduit and then use the SER through the garage and the rest of the way under the house. Or should I 'JUST' use the ser in the garage portion? Sent from my SM-G930V using Tapatalk

Thanks. And I'm certain I can't connect this ser and the current URD conductors couldn't be connected since they are 2 different sizes and ratings. I thought a out doing the main / combo box but if I do that wouldn't I need to 'update' my wiring as in move the main box due to being not code...

Acquired some of this. Might be overkill but run this through conduit all the way? Sent from my SM-G930V using Tapatalk

The deck is probably 4 ft against the wall. I have a slope in my backyard. And the panel is about 5 ft high Sent from my SM-G930V using Tapatalk