Search results

I’m not sure the hydrosmart120 can run with outdoor reset.

I have 1200sq feet with 4 loops. I just got everything installed and turned on for the first time. I’m also using the hydro smart120 boiler which so far I’m happy with. My question is what is an ideal output temperature? Pump speeds and hom settings on the floor valves? Thanks

The load calc that I used says I need 60,000 btu at the max.

Here is the condensing model. https://www.menards.com/main/plumbing/hydronic-radiant-heat/radiant-heat-boilers/hydro-smart-trade-120k-btu-condensing-lp-microboiler/hs120con-lp/p-1444433728524-c-8519.htm I have 1200 sq feet.

How big of an area are you heating? How’s your gas bill when running it? I have 1200sq feet one zone and 4 loops.

Hi, I am thinking on getting this since it seems to be the most affordably system, even though its still a lot of money. Just curious who else has one and if they like it. I would be using the condensing propane boiler...

This is the setup that I think I will eventually have incorporate, the picture shows the hot and cold T'ed together under the water heater? What's going on there?

The pumps say 0 to 17 gpm, how would you ajust it to 3.6gpm?

One question that I have is should I go with a boiler system or tankless water heater. Tankeless water heater is simpler and cheaper to setup from what I know so far.

It’s half inch tubing and about 280 feet. There all about the same length.

Im in Rochester, MN I have two 12x12 garage doors that are well insulated and I think there r20. I have 4 windows which are 4feet by 5 feet. The roof pitch is 4/12. Did you build your own panel, I am thinking about building it myself vs the one at Menards...

If I remember correctly the spacing is about a6 inches and al loops are about 280 Feet. I am going to install r60 in the ceiling and r 19 in the walls since there 2x6 framing. There is two inch foam under the slab and around the perimeter as well. The garage doors are two in foam which I believe...

Hi, I live in Minnesota so it can get quite cold here but my questions are easy for most of you. I have a 30x40x14 garage which is 1200 sq ft. and have one zone with 4 loops and not sure what water heater/boiler is big enough for this. Would electric work on something like this? I am leaning...

I'm installing horizontal steel siding.

I am located in souther Minnesota

I'm installing steel siding and I am wondering if I should install the soffit first or the actual siding first? I was told to install the siding first then you won't need undersill at the top where it meets the soffit. I'm installed horizontal steel siding.

Hi, This is a great site... See attached picture. My question is how are people framing the garage doors when there is concrete at the bottom, I want to avoid rot issues down the road. Should I use green treat on the bottom 4 feet and cover it with steel? Opinions are appreciated.