Search results

freeze the inner heat the outer it will work. If you have a local weld supply get some liquid nitrogen to freeze the inner.......

Nice...................

used mm 1 for about 10 years high winds ect. get the gate lock needed to keep it closed. mm is defiantly a lighter duty unit but it works. all auto gate openers are always needing adjusting one thing or a another, getting ready to install one at our new place way better than getting out to open...

Got me one free is good........

Stable Base = good slab............ rebar or mesh ? what ever is easier for you, it all needs to be set on dobers or stands..... 4000psi mix no cc or very little. Wife and I and a few helpers are going to do 36+ yards as soon as the freezing nights are over. We are using rebar just because I...

Dito.... double truss 12' centers have that on 4 buildings..... 4/12 metal over osb 2x6 purlings on 24" centers. north Idaho

From my own experience, 29 is great if you sheet the roof w/ osb or ply. 26 if no sheeting. A lot of builders in north Idaho use 29 with no sheeting and I have seen no problems. Just my 2 cents worth ......

here you go... 600 for 1/2 around 480 for 3/4 to 1 " . You wont live long enough to rust out black pipe in air service http://www.northamericanpipe.com/downloads/prod_specs/ASTM_1785-D2665_Schedule_40_DWV_Spec.pdf

10,001 needs a dot # gross combined weight if you are in business. if you cross state lines. Cal requires a state number with in the state, Idaho none needed unless you are over 26,000 GCVW

Looking for experienced Handyman. Single Person (retired preferred) to live on our property in private Guest Quarters. We provide Electric, Water, Trash, Propane and Basic TV. We credit you $300 towards Your monthly Rent of $600. Must have own supplementary income, no smoking, tobacco, drugs or...

I you have the ability to break the bead just us the heavy airsoft beads from wallymart here is 1 link http://www.tirebalancingbeads.com/for reference

forget the balancer, use beads best thing for large tires

So glad I'm in north Idaho..... only a building location permit required, build like you want it, if it falls down your problem. mankind has been building without engineers for 1000's of years. I have worked with many engineers through out the years and very few could actually build there way...

I'm using water seal once a year applied w/ a pump sprayer. or it can be stained. It can be no maintenance but will gray out over time. Here is a link http://www.wrcla.org/installation_and_finishing/default.htm

This years projects all western red cedar 11 1/2" @ .20 per board ft. with a 15lb felt under layment and 3" bats.

So many nay Sayers. Stick weld it or use you 180 but preheat, It just a gusset. or use a old ac stick machine 7014 or 6011 Ac /DC use 7018 or 6010. You learn by doing not by taking it to a shop.

1/8 7018 dcrp at 90 to 110 amps will get the job do, use multiple stringer/single pass welds here a photo or 2 of stick welding a new cutting edge on one of my tractors. used 5/32 7024 @ 180amps single pass on this

If you cant get it approved I would like to look at it, Currently at our calil home (Mojave) I could use it at our place in Idaho, No Plans or building permit required.......

the hitch

Long time lurker, Great form lots of info. will post some of my projects soon. Currently in Mojave Ca. But as soon as it warms up will be headed to our other home in Oldtown Id, to start the barn / shop project.