Search results

Post the model # here, maybe a member has some old installation lying around.

If your garage is insulated it should work. If not I would recommend you insulate it before you try to heat it.

I only had it a year before a gopher chewed threw it. If you don't have to worry about ground rodents, then it would be OK.

I am thinking not. I had a modine furnance in my garage in when I lived in the city. It was new in about 1980 something I think. That one did not allow me to vent out the side. I would sudjest you find out your model # and see if you can find any install instructions online. Not sure when they...

I would not use the plastic. The propane company put it in at my lake place, lasted a year before the gophers chewed a hole in it. I had them replace it with copper. If it were me I would use the copper (it has to be rated for gas not sure if it is L or M) or the stainless. I have been told...

Yes, if it is wired correctly. :wtf:

First, verify they are all on the same circuit. Turn off the breaker then check each outlet. Once you verified they are all on one circuit I would start with the one closest to the box. Disconnect the outlet turn the power back on and check to see if any of the remaining four have power. Yes...

Yes you do want to keep flammables away from the stove. My dad had one for years in his garage. Only problem he had was when he first installed it he "cheap-ed" out and did not use a class A chimney through the roof, wasn't until a few years later he climbed in the attic and saw were the chimney...

Not an electrician, but if you do want GFCI in your garage you would only need to put one on the beginning of the run, all outlets after that would also be protected

Or longer, I have waited up to three months. :(

I think the guy that did that either owned the house I now have or worked in it. Had as similar install for my garage door openers when I purchase the house this spring. It is a "project house" and still finding many code violations. Example, holes in sheet rock in one of the bedrooms...

$385 Plus $30 for shipping? :wtf:

Drain Waste Vent

It would be for me, but then I am only 5' 8". My bench is 36" which works out good for me.

Yep, you can still see a scar on my left hand, from what was then a new angle grinder twenty five years ago. :( I got careless setting it down when I was done with it.)

Do you plan on using this trailer for commerce? Example = if you use it to haul cars that you repair and then resell or charge for the repair. Then the trailer would have to meet DOT guidelines , that would mean brakes on both axles, retro reflective sheeting down each side of the trailer that...

Tell him to check his spam folder. That is were mine first appeared when I registered. Then add the domain to the safe senders list.

Go to auctions were they are getting rid of old farm equipment. A lot of good metal in those things cheap. That is if you have the room to store it until you need it.

My luck the wife would hop in the car in the morning and try to drive to WalMart. :)

Yep, it is all in the marketing. :)