Search results

The inside of the molds (cavities) are aluminum for ease of repair. As for the flashing issues, its usually on startup or if a machine runs out of material, the next shot when the material is back, usually causes the flash. The plastic sits in the extruder and cooks for too long and is being...

Anyone ever use any brass hooks and picks? If so, how durable are they? Im a process tech on plastic injection molding machines and they will be used to dig out flash and stuck sprues and runners. The tool shop has been breathing down our necks about not using brass tools, but they only thing...

Ive placed several orders with JB Tools. Some through ebay, other times on their website. Sometimes, one may have a better price than the other. Always a great experience. I purchased my Autel Maxsys Elite from their ebay store when ebay had a 15 percent off code. Sent from my LML713DL using...

I picked up the 3 gallon shop vac for use at work. Unfortunately it is backordered online. Sent from my LML713DL using Tapatalk

Count me as one of the 10. My smallest wrench was 30 to 250. Should fill in the gap nicely. Thanks for sharing. Sent from my LML713DL using Tapatalk

Why doesnt Astro make friends with some big box retailers? Ive seen some tools available at tool speciality stores, but not on the shelves of larger chains. Sent from my LML713DL using Tapatalk

For a cheap used ratchet that is pretty bullet proof, i would turn to ebay for an SK round head ratchet. I believe the 3/8 drive is 40 tooth. Sent from my LML713DL using Tapatalk

Does this mean an end to the [emoji89] phallus tri lobed handles? Though they look goofy, you can get some cranking torque with them. Sent from my LML713DL using Tapatalk

I believe i seen somewhere that it is 32 tooth mechanism. Ill count them tomorrow. I have one dail type cdi for inch lbs, and snap on tech angles for 3/8 and 1/2" drive in the garage. Used the PI several times last night, and have no complaints. The only other ratchet I use at work is a...

UPS dropped this off today. Precicison instruments 1/2" 40-250 ft lb torque wrench. First split beam style torque wrench for me. It will stay on 95 ft lbs most of its life besides the occasional mold that needs the clamps torqued to 120. Sent from my LML713DL using Tapatalk

The plastic wiper cowling on my Saturn is held on with three 4.5 or 5.5 mm and two plastic push pins. Same for the sheetmetal screws that hold the speakers in the rear deck and door kick panels. Sent from my LML713DL using Tapatalk

I picked up a set of the smaller ones at lowes to carry in my back pocket at work. They are rather sloppy compared to their bigger brothers. The vacuum packaging made it impossible to tell in the store. My coworkers doyle pliers put them to shame. If i knew, i would have picked ordered up some...

Ill 3rd this comment. It made their product stand out among the rest. It could have been the new signature look superseding the tradational roundhead that everyone knows and recognized Sent from my LML713DL using Tapatalk

I've had not a single issue out of my green lever 3/8 drive. I would pickup more if they ever relased a flex head version. Sent from my LML713DL using Tapatalk

I picked up the Gearwrench 120xp set about a year ago and they are from Tiawain. I prefer non locking myself, but cant stand a floppy head. My 1/2 inch drive can hold a 7/8" sunnex impact allen socket without any problems. Sent from my LML713DL using Tapatalk

Ive been pleased thus far with my Ryobi tools purchase. Especially since i gave less than 200 bucks for all 5 tools. I thought the circular saw was crappy since it had a clear plastic guard on it, but it survived a fall from 17 ft onto gravel a couple weeks ago. The impact driver had its first...

Snap on non quick release ratchets are bear to get sockets off. If the socket gets oily, its takes a wipe off to get them off. Its a double edged sword. Your not losing your socket in the deep unobservable abyss in a tight spot by accidentally hitting the button. A good quick release should...

I picked up this kit on sale for 159 dollars from Home Depot and included 2 free tools. The grinder and reciprocating saw have got a workout, but until now, the impact and circular saw have seen very little action. As for the drill, it is used mainly for bolt extraction, but has performed well...

It comes in handy when you run out of daylight and are looking for the tools to put up. Sent from my LML713DL using Tapatalk

I use a torque wrench on anything that goes into aluminum. Lugnuts and any sealing surface that needs consistency among the various fasteners also get the exta time to grab a torque wrench. Shock mounts, leaf spring u bolts, and fasteners of those sorts, get the feel method. Sent from my...