Search results

Good stuff.....

Garage's are for "Garage Puppy's" ........

This is what we use on our trailer......it works great.... https://www.rvupgradestore.com/Streak-X-Black-Streak-Remover-1-Gallon-p/streakxgal.htm

If you just want to do one type of car ....like a race vehicle...... We just take the normal MC cap and drill it out for a Schrader Valve.....install the valve in the cap and screw the hose from the Motive Tank to the schrader valve.....pump it up and go bleed away...... KMP259/Morris

Oil Eater......

I called a couple masonry business today and all of them just want to do sidewalk work. I need to keep checking with those company's until I find the guy's that can do the job. Thank you for your help and advise....it's very much appreciated. Morris

Thanks for the advise.....I guess the best thing to do is call and get some estimates from a masonry business.

I found a building I like....but I need to install a 12'x14' garage door in a different location in the building. Is it possible to cut out a hole that is part foundation and part brick and install a garage door??? If so how much do you think it will cost? I appreciate any thoughts the board...

Mobil 1 75w90 is a GL-5 with Limited Slip additive all ready in it......excellent gear oil for transfer cases and differentials.....

John Dow......look it up..... http://www.johndow.com

Army/Navy....also known as AN bolts an washers..... McMaster ....Titanium grade 9 bolts and washers....in special applications....

Thought I show you guy's the work bench stools we started making today.... Fortunately we have orders for 8 of them now..... We are just recycling our Mobil 1 Keg Barrels..... and they make great stools and tables and Garbage Cans....

Go to Aircraft Spruce this site ....you"ll find the nut you need...... https://www.aircraftspruce.com/categories/aircraft_parts/ap/menus/ha/nut.html

I remember many years ago at my shop, not my home, the water table was so high with so much pressure......that water was streaming in between the footing and the walls.....and the side walls in the basement were 12" thick.....so I guess we do live in a high water saturated area....But once you...

Slowgsr I wish I could think of a good use for the water....since we live in a nice finished neighborhood, we can't excavate the area....so we just live with the water flow.....but now we have it under control.....but I hate just pumping it out....but it's so much, it's hard to harness....and...

Matt The Zoeller Alternater does what you said, if one pump fails, then the alarm activates and the othe pump works until you repair or replace.....there's also a high water alarm the you can set and activate with any kind of a float switch.....

The other thing we did was to test the water to see if it was drinkable. And we found out that the water was as clean as our house water. That made me feel much better once I knew it was very clean water coming in the house. I'm sure many folks have had this type of issue and there are...

BTW, I have all of my Down spouts and sump pump water plumbed in a 4" PVC pipe out to the Storm Sewer so we get all of the Roof water and sump pump water away from the house. This hasn't had any effect on the amount of water coming into the sump basin. Also here's the clamp that I found that...

Larry I agree with you, I just haven't had time to install the Tops yet .... the good thing was they came with Stainless Steel Fastners and a seal for the top to set on.... Also as you can see we have tried different approaches to high and low levels in the prior sump pump location. None made...

Slick Once we got this done, I must say sump pump is a thing of the past and I should have done this many years ago. One of the things that I found was the attachment that holds the cord of the float switch.... I have to look them up ... but they are what makes it very easy and you can...