Search results

I'm looking to buy a VIM AH100N air hammer bit and the replacement nylon tips (AH10N). I can find the AH100 three piece air hammer bit set set most everywhere but the individual pieces seem to be a challenge. NTXtools, etoolpros and USAtoolwharehouse have them, but Previous experience...

Picked up one of these through work from Airgas, got a nice deal on it. I was looking to buy the LX 225AC/160DC, but according to the rep, they were being discontinued and none were in stock. Seems like everything is moving to inverter type, at least for stick welders. Thing is about half...

Whats the best/most user friendly ones available?

I picked up a lightly used KRL1023 in gloss black last week, The one wide drawer latch is broken, So I figured on getting a replacement for it and some spares for the other drawers. Given they only have a few different ones, as long as they say they are for a KRL1000 series they will be...

Anyone have one? http://www.matcotools.com/catalog/product/MT2760/1-2-IMPACT-WRENCH/ I am not much for buying truck (re)brand air tools unless I can get a pretty good deal on them, but the newer Matco impacts are pretty impressive based on what I've seen at work. IIRC, PTP (?) is making the...

http://www.amazon.com/dp/B0002SRIX2/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=2NSE5U6ZP291O&coliid=I18JCUI28X2X8P Rather then buying a set similar to this one, I found a couple places that have the components reasonably priced. I have terminals available, I just need to buy the wire &...

Does such a thing exist? I could use a set. Grey penumatic possibily had them, but thats all I could find.

I decided to buy a 1/4 impact socket set the other day, now I need an impact. I'm leaning towards the Bosch 12v since I already have a couple of their tools. The PS41 is likely what I'd buy. I question using the 1/4 hex to 1/4 square adapters though. Are they problematic enough to warrant...

http://www.matcotools.com/catalog/product/MD79/600-AMP-MULTIMETER-CLAMP/ Anyone have this clamp meter? Saw it while browsing & it looks like it has decent amp range.

I'm looking to upgrade meter's from a Craftsman I got about 6-7 years ago to a Fluke. Mainly looking at a 115 as I think it should cover all the basic's that the Craftsman does currently and then some. http://www.jbtoolsales.com/fluke-115-digital-multimeter-true-rms/ I also looked at the...

Has anyone compared one to the PDR5A it replaced? I'm curious if it's exactly the same or a little different (other then being BP & the coo).

Looking at picking up a set(s) of large crowfoot wrenches 1" to 2-1/4", mainly for hydraulic fittings. I have seen a couple Sunex sets (9720 & 9722) for a little over 100$. (I will probably buy these unless I find a better deal) Then at Amazon there are GRIP, Tektron, T&E, Neiko and the...

http://www.deterco.com/products/pi/ratchet.htm Found the kit I need, #R33AR-RK, for a model M3R250F. Problem is I cant fid the kit for sale anywhere. I also e-mailed PI about this two weeks ago with no reply as of yet. The wrench is fine calibration wise, but recently started skipping due...

Napa (Sunex) brand, 3/8 drive, 18mm, 6pt deep. Cracked right on the "flank drive" corner cut out. This one and the 21mm have been getting a work out in the last few months. Mack likes to use 12mm flange bolts in the frame with 18mm hex on the bolt & 21mm on the nut. Already getting a...

The local dealer has a nice looking (from pic's) KR1000 for 2000$ (may be able to work on the price). Currently I have the 41" masterforce top & bottom box with their side box and I'm out of room if I add more stuff, which I will be doing in the near future. My question is would a KR1000 be...

http://www.tooltopia.com/actron-cp7838.aspx Is this a decent test gauge? I've been putting off buying one for a while. I pretty much only run/work on Fords so I really only need that test adapter (but I wont rule out needing others at some point).

After having used the one at work (worn + 3/8 hose), I looking into getting one. I pretty much decided to get a IR 2141/2145, but I was curious about the Florida penumatic composite impacts, if they are any good or not. They are a bit less expensive. I looked at the Aircat's and they seem to...

Doing some looking around to see what the prices are on these Snap-on was 715$ (30*x60*), Wright/Martin (15*x60*)was about 240$ from Epsteins, Both set's are 3/8 to 1-1/4. Williams makes them too (15*x60*), but they dont have a 15/16 apparently, So I didnt bother looking into them any...

Was scanning through and found this one for 135$ free shipping! regular price 280$. Sears wants around 261$ plus shipping. Dimension are 18" deep, 15" wide x 52" high according to Sears website...

Looking for one. Specfic use is for jam nuts on switches. I didnt see one on Snap-on or S-K's site's, So I guess the question is does anyone make one? I know they both made/make shallows, but I need a deep for my use.