Search results

Reznor UDAP 75K BTU Unit up and installed with Honeywell T5 Smart Thermostat. Added to HomeKit and ready to roll. Really nice unit, heats up fast, no leaks, and quiet too. Took less than 2 mins to hang, 3 guys, 2 on the A-Frame alloy ladder and one on the blue fiberglass to support from...

Nearly ready But first, beer. Thank GOD the nearly 10% Blonde Fatale ran out. More of an incoming Summer Vibe with the Mango Cart. It's FANTASTIC.

Ready to get the thing up. I mocked up the unit with a piece of cardboard and got it attached to the ceiling. Now I'm going back and forth on what b-vent to use: -I have a 3 ft section of flexible b-vent -I also have various 45/60 and 90 degree elbows -I have a taller 4 to 5" adapter since...

Thermostat wire ran, a few casualties in the cheap-o fish stick kit I picked up on Amazon but it served its purpose. I'm assuming I went through some fire blocking or some insulation got caught on an end causing the kinks. I also left myself 5 or so feet of wire in the wall and plenty extra for...

Closer, needed a fish stick kit as my thermostat wire wasn't making it though the pink exterior wall insulation well enough to hit my mark. I know I'm in the right stud bay, I'm just hoping there isn't fire blocking in there and ~10 feet of fiberglass fish stick helps me push that 18/5...

Here's the write up on the jumper wire and pin creation process in order to add a Thermostat C-Wire (Common) to the Reznor UDAP75. This C "Common" wire is required for most, but not all Smart Thermostats. I'm using a Honeywell T5 here, as thats what we also have in the house and it works great...

Garage Related Reznor UDAP 75 Update------Closer: -4" to 5" Selkirk adapter installed, height with elbow and initial piece is just about perfect height wise too. -Mount painted and dry install. -Thermostat arrived, but my 18/5 I ordered was too short by about 5 feet for where I wanted to...

Garage heater update: -Power Cord Installed -Drip Leg dry fit up -Have shopping list of 4" Type-B vent from Menards + a 4 to 5" coupler since the vent in the ceiling just happens to be 5" -Turns out the pin connector I needed for my C-Wire isn't a Molex at all but a Mate-N-Lock so I'm returning...

I'll be doing this soon. Did you just buy a molex connector and spade terminal for the jumper? Can you share any pics?

Welp, new project just arrived -- once again courtesy of FB Marketplace. Reznor UDAP 75K PTU - Original owner, sparingly used, $350 Should be more than plenty for our 3+ car garage at around 1500sq ft. To Do List: -Need to order a ceiling mount, then paint the mount white. -I'll also need to...

Updates as we head into the weekend. Building my wife a new to her bike. She thought her Waltly titanium bike was nice, but boring. So I found a flashy Cervelo Aspero in her size and I'm building it up. Waiting on the BBRight Dub BB to show up and it'll be ready for spring. Black powder coated...

Since I had already done so much, I figured I really should finish it off with new beer lines (3/16 ID), a new coupler and some nice 90 degree barbed tailpieces. Super happy with it now, I did have a small leak at the coupler and this small and cheap upgrade has it pouring great. Yeah, kind of...

Matching Tap Pull has arrived! The Marley Dog is a happy/proud girl 90 degree adapter installed

Well, I still have a headache from the Blonde Fatale. But it works as good as it looks! Still toying with the CO2 pressure and getting that dialed in will take a bit, especially because this beer wants to be more carbonated than usual. It was a little flat last night at 12psi but this Belgian...

Just did a service on my Kickr Gen 5. I had some sqealing, the bearings were fine but a tooth brush running right on the grooves on the inside of that pulley you have pointed out cleaned up the old, ground rubber. Wiped everything including both sides of the belt and its back to whisper quiet.

All wrapped up, gonna 3D print a little cord wrap guide for the back and fill her up. -Cleaned up the tower, fixing bolts, and rubber gasket. -Installed tower, tray mockup, and installed fence with new screws. DONE

Have everything done on my list, just waiting for the last coat of spray on Bed liner on the top to dry. Not as much texture as I would have liked, but can always roll some more on down the line (pics tomorrow). Tap handle to arrive on Monday - Blonde Fatale 1/6 keg here tomorrow. Really...

Ready for a wipe down, a little primer on the sides and spraying the top. Wrap on Monday

Kegerator update: I made a list of things I needed to do and started plugging away as parts arrive. I really wanted to completely replace the top with a nice piece of Walnut, but the top piece has some grooves on the bottom and threaded inserts as well so it sits flat and it wasn't worth the...

New project thanks to Facebook Marketplace. $100, CO2 is pretty full and comes with the regulator as well as cleaning stuff, extra tap, etc. Plans are: -Wrap it in Vinyl Black Camo -Paint the base black and put new clear 3" roller blade casters on it -Replace the top laminate or patch it in a...