Search results

Well I didn't want to jinx myself and post to soon, but I changed the nozzle and pump strainer, and knock on wood everything seems to be back to normal. Thank you for all of your help!!

No. The first tech cracked the bleeder line, and told me I needed a new unit. Then proceeded to give me a few options, the cheapest of which was over 7k, but if I have a down payment today, they'd do the whole heat and a/c for the low price of 14,500$. The second was a friend of mine, that's...

So I just pulled the strainer filter on the pump, and the nozzle. The filter is clean, the nozzle also doesn't look to bad. It has s little blackish residue on the outside but that's about it. Running down to the store now, I'll hopefully have good news in an hour or so

Thank you! Yes I've watched some YouTube and it looks simple enough

No. I'm assuming you mean the strainer that is before the nozzle? That was suggested, and I'm going to give that a try tommorrow. Do you have any advice on getting to that simply?

Thank you! Will give that a try first thing in the morning The transformer that swings up out of the way, that is the same area where the cad is correct?

This may be over my head a little, but is the nozzle change out easy? Also, where on the unit would it be located? There was no Manuel left with the furnace

I guess trying separate fuel will be my next step. Will regular diesel from the pump be ok? Also, I don't have to keep bleeding it, it hold prime and I never got any air out when I cracked the bleeder during the "recycle" start up, but for some reason that made it re-ignite a few times. That...

Yes I've replaced the filter, and just about a hour ago before I left for work I attempted to bleed it when it attempted to re-fire after the "recycle" period, and it would not fire. I bled about 6 oz or so into a solo cup, it it was all clear (well red, but clear of anything else) We did...

I hate to keep re-setting, but I have to keep it somewhat warm here. The only thing I can think of at this point is maybe some kind of fuel problem between the filter and the combustion. I just don't get why it will run perfectly fine for the small amount of time, then just die.

I'm in harford county

I'm in a little bit of a jam here, were fixin to get a blizzard this weekend, and my heat starts to give me problems. It's a Kerr summit oil furnace with a Beckett R7184P burner. So here's the problem. Two days ago, before bed I noticed it was kind of chilly inside, checked the thermo and it...

Thanks for all of the input! At this point, I'm figuring as much as I've spent on this building, I may as well pay the extra 300 for the r18. The lifts specd with the door is a lift master medium dirt hoist, no model number on the quote.

Thanks for the input! Yes the large door is a commercial door. The small door is residential, but is on an enclosed part of my lean to, so the two doors being different isn't a big deal, there not close to each other

^^thats what I was thinking. The door is 14 tall 18 wide These prices are for clopay doors

It's time to choose the doors for my barn, I have one centered 14x18 door and one 8x7. I plan to eventually insulate the building, but my question is, at what point in the door insulation a waste of money? One quote I have is for the 14x18, no windows. r9 value w/opener $4300 R18 w/opener...

Yea man a pic would be awesome, thank you!

Was your slab done in 2 pours?

I'm no help, but will be watching this because I'm getting ready to do my floor, and want the same thing as you

Thank you guys for all the input! I'm gonna start a build thread here soon when I can get a free hour or so