Search results

I want to connect this capacitor to this wire. Should I use the Molex Parallel splice? Thanks!

Thanks! That's an excellent point about the vibration and crimping. The original coil harness does not have a connector. The kit comes with a 12-point connector and all the pins and great instructions, and there are 2 great videos for installing it. And they show you what crimper you need...

Hi I will be replacing a coil harness with one that is premade, and connects to the original harness wires by a 12-point connector. So I'll be cutting the original harness (composed of 11 wires). That is only important to this discussion because now you know that the wire that I want to...

By definition all vices are addictive

Thanks! good idea

Thank you Duneslider!

Yes well the good thing is it doesn't have to be perfect, it's the garage. Plus I'm going to trim it with ripped down cedar fence posts from lowes. And I'm going to start with the first panel in the middle of the room so that if it is off on the sides, the trim will hide it. Does that solve...

Thank you Glemon! At last, someone on this forum who appreciates that. I too, have had the experience so many times with contractors and mechanics who don't want to do it the way I want to do it and are stuck with their way, or old ways of doing things. So I've done it myself, and I think...

Thanks for the explanation. Tomorrow I am getting a drywall lift in great condition for $65. And I have a second person. And I'm going to try everything ahead of time on a test area.

Many people in the reviews state how real it looks, how easy to install and cut, and how pleased they are with the results. Some even put it in their living room next to the fireplace. This is my garage.

Could you explain why you think that?

Thanks! The staple gun I bought has a depth adjustment so this should be fine. And I will test it. https://www.lowes.com/pd/Metabo-HPT-was-Hitachi-Power-Tools-18-Gauge-1-4-in-Narrow-Crown-Finish-Pneumatic-Stapler/1000820278 It says for the material: Medium Density Fiberboard (MDF) Substrate...

Cool thank you! Great info. Yes, I put a roller in my cart yesterday because someone else said that too.

The staple gun I bought has a depth adjustment so this should be fine. And I will test it. https://www.lowes.com/pd/Metabo-HPT-was-Hitachi-Power-Tools-18-Gauge-1-4-in-Narrow-Crown-Finish-Pneumatic-Stapler/1000820278

OK well I'm going to do some testing and find out ahead of time so no worries there.

OK well I'm going to do some testing and find out, thanks!

weird

Thank you! Here is what I plan to use. I am going to test it ahead of time and I will report back. https://www.lowes.com/pd/48-in-x-8-ft-Smooth-Weathered-Barnboard-Wall-Panel/1000701468...

Thanks, that's a good idea, but I don't like pine that much and that would be a lot of boards to cut and fasten.

Thank you! Thats a great idea to test it on scrap. I will do that. And the roller idea is great too, I'm getting that. Sure will beat using my hands.