Search results

I'm looking for a heater for my garage its 24'X22' ( 528 Square feet) , the garage is not insulated and not sure if I should go with a mobile propane heater or natural gas heater, I will only be using the heater when I'm working inside the garage. It gets pretty cold here any suggestions

I finished stripping the door, now I need to do some sanding, i'm still not sure what stain or clear coat to go with

Finally got around to stripping the garage door, It was a lot more work then I anticipated, I still have some more stripping / sanding to do. What stain do you guys recommend, I would like something that will hold up to the elements (we get a fair amount of snow up here) , I can't see myself...

anyone tried Walnut shell Blasting or soda blasting?

I need to strip my Wood garage door, originally it was varnished (I think) but someone has painted over the varnish and in some areas the paint is separating from the varnish (especially top of door) what is the best way to strip this door down to bare wood?

I'm looking at purchasing the Dewalt 20V MAX* XR (Brushless) 3/8" Compact Impact Wrench Kit (4.0 Ah). anyone use this daily on here? I'm looking to purchase this kit for work, I'm going to be using this to disassemble components ( example; transmissions, differentials, engines, torque...

bump

I Realize that my Air compressor is too small, in order to buy a bigger compressor first I would need to bring 230V to the garage but I wont be doing that right now, will this work with my Pro Air II by Devilbiss 25 Gallon 135 PSI oil free Air compressor, I'm thinking of building a " Copper...

oh ok, well that dryer is worth more then my compressor lol

for some reason it wont open, which one do you recommend?

your link didn't work, can you resend me the item

I have a Pro Air II by Devilbiss 25 Gallon 135 PSI oil free Air compressor, I get lots of water coming out of the air line. I'm going to be assembling an engine and going to be painting it and don't want water all over my engine, any recommendations for air dryer for this air compressor? Thanks

I have a Snap on KRL 761 & KRL 791 tool box, I would like to remove the snap on emblems to take off the vinyl wrap, any idea how to remove the emblems without damaging them, there is 3 studs on the backside

Thanks for the reply, I still haven't had a chance to buy a capacitor yet, hopefully this weekend

Do you think that I could of damaged the motor windings by running it with a broken capacitor

Ya you are right my broken capacitor is a 2 terminal (terminals are joined)

thanks for the link my capacitor label says 40µF, 370 VAC I can buy this capacitor local, would this Capacitor work? Its a 4 terminal though mine is a 3 terminal Capacitance: 40µF Voltage Rating:450V AC http://www.princessauto.com/en/detail/40-f-electric-motor-run-capacitor/A-p8513368e Its...

I disconnected the pump from the motor and connected my amp probe and was getting 16.9-17.2 amps and the breaker never tripped, I then removed the rear housing and found one of the capacitors damaged, could this be my problem to high amperage? where can I buy a replacement capacitor?

I will have to try that, I had a look at the motors plate and it says 15 amps and its a 1.7 HP

I don't understand it never done it before, the plate on the compressor states 15 amps, and its pulling 20 amps,