Search results

I used a vacuum seal machine to keep the parts seal and label with sharpie. I also have a drum w/ lid full of the small parts. The vacuum seal help to keep any moisture out. It works great recently I cut open an alternator that I seal 10 years ago and it look just like the day I bag it.

You can substitute the out doors pipes with a single pipe refer to as Bazooka. The beauty of this thins is that expels on the middle while breathing through the back avoiding some of the freezing problems. Here is the link to what I am referring...

Why could you just install a timer have it set for hours you are on the shop working?

You can also visit supply house for materials and asked questions about what you trying to do. Do put separate controls for the new area.

Also pay close attention to static charge!

You might want to look at your furnace filter. What size, how thick, and MERV rating. The higher the MERV rating the more restrictive the air flow. Your supply register should be close to this window, pushing warm air at the base of the windows.

The power cord has power and the timer is the pull out kind. I will take the knob out and check the teeth.

I have a Kenmore 500 washer that does not start at all, totally dead. I open it up and check the lid switch and is fine. I did not replace the capacitor because I do not think is needed to advance the time. I also look for some kind of fuse and found none. Any help is appreciated

Try to down load the installation manual from the internet, it will probably give you some venting options.

Hola everyone, I have really enjoy reading through all boards and really amaze of the different discussions. I like to share my favorite places where I get all the stuff for the cars. For oil changes, Walmart and Menard's have the best...

I think there is a special gadget or valve that you install where the water comes into the house and can sense the flow of water caused by a leak and turns the water off to the whole house. I just can think of the name for this valve or sensor.

Have you verified that the obdii port has 12v? I try it on 2 computers in the same location where I normally plug the mouse and nothing work. I also did the same thing on the 2 different cars, plug it on the OB2 port and nothing work. Took my old cheap scanner from Harbor Freight and it work...

If you do keep it in the car, make sure the battery maintains some sort of charge if you get much weather below freezing. A dead battery can freeze solid and crack the casing. I used to keep the battery on the car and put a charger before I went to use the car. This time I will take the battery...

This is what I done lately but the battery is lasting fewer years than the cars I drive daily.

I have learned and enjoy reading all the stuff that you guy's are currently posting. What do you guy's do with the car battery for those times that the car sits on the garage for a few days to a month with out been driving. I have a toy car that I seldom drive during winter and need to buy...

You can make your own shallow socket by grinding or cutting a regular socket in half.

I recently bought a Foxwell NT510 and out of the box the scanner will not turn on when hook up to the computer or the car. I bought it because of it's bi directional capabilities but was a total lemon. The software disc was only for windows vista, xp, or 7. I had to drag an old computer out of...

Nice car, what is the size of the new bar when compared to originals. Are going to upgrade the fronts too.

What a great conversation, I will like to add that more car companies are know moving the fuel injectors into the combustion chamber for better fuel economy. If I where to have a car with this set up, I will probably run a good fuel injector cleaner at least every 6 months. At this location the...

Thanks for the link!