Search results

We have had the Lorex system in our business for about 8-9 years.. 6 camera's on the one system and 4 camera's on the other system. We did have the hard drive fail on the oldest one last year.. But even after 9 years, the camera's still give excellent quality video. Night vision is not great...

And more

A few shots of mine. Bob

Yep, That is a 76 250CR.. I have few more. A 81 and 82 250CR and a 81 430CR.. and then a couple 84 and 85 400's (WR and WRX) and a 85 250WR. and then a few Honda CR's. I race a lot of Vintage and Post Vintage Nationals.. Bob

I built this Jib Crane to put bikes up on top of my work shop.. Bob

98 F150 with SnowDogg plow and my homemade wings and 2000 F150 with the same set up. Plowing some deep stuff. Bob

I was at Menards today... 7 1/2 foot by 17 foot is $159.00 Bob

I couldnt do the elevator, so built a Jib Crane... I put the spare bikes up on the mezzanine... Bob

Each drawer is keyed different, so that Kinda *****... although I probably wont be locking them.. Bob

Found these on craigs list this week... The guy had it in his basement for over 20 years.. Couldnt find a name on it... Heavy duty... 24 wide by 30 in. deep. $75 well worth it to me.. Bob

Looking good.. Heres mine and what I put up there..

Welcome from the big city of Osceola ! Bob

I built one using a small cooler and put it in our racecar. (roundy round stock car) Worked great blowing cold air on the driver during heats and mains.. Bob

I did the white metal ceiling in my pole barn this winter.. I love it.. 2foot on center. 12 inch insulation on top of it.. bob

My brother donated the steel posts. They were leftover from some job he did. They were galvanized, so had to grind off the coating before welding. Bob

I was asked to build some steel gates for Wings Etc. for their enclosed dumpster's as their wooden ones kept falling apart.. So this is what I came up with.. 1.5 in. steel tube frame. Steel panels used for Pole barns. 7 inch posts anchored with 10 bags of cement. Made my own hinges with 1"...

They are 1/2inch diam. 4 inch long. Bob

This shot shows the brace up against the wall of my workshop and can see the steel plate at the ceiling. If you click on the picture, it should be bigger. will try and take some better pictures with our other camera. Bob

It is attached at the top to the ceiling with a metal plate across 2 rafters. Above the metal ceiling we ran braces across 4 rafters. It is also attached to the work shop wall at the 7 foot level. Bob