Search results

I got an 3/4" drive 2-3/16". Anyone want to trade a 2-1/4" or 2-3/8" for it? Thanks

Out of stock @ check out, damn

I have the 49 pc vortex set. I has come in hand a few times. Glad I bought it.

I would be interested and local if you want to sell one. I also have some new filters and regulators if you would be interested in a trade perhaps.

Not bad at all. I bought a 10 year old used one for $150, but the pump and motor is made in the USA.

Mine's been working for a year now after the fix. No issues.....:beer:

I got the 3/8 today. 20% off the clearance price. $39.02 net..

Yes, use the SMC One Touch. If you get the KV2 series for DOT use they come with an internal tube support and exterior support bands.

What number of flashes is the LED on the motherboard flashing?

My 75K is very hot even with using B vent....

Pinch it per the attachment. It works!

I have a 75K. I used high temp RTV to seal the 3 to 4" adaptor that came with it. Once dry, I drilled two holes and fastened with self tapped screws. it is tight now. The I slipper the B vent over the adaptor.

No idea. I bought mine at Lowes in October. So far the fix has worked. To me it is a design flaw. I may also turn down the flame a little as a previous poster suggested. My flame goes past the turn in the heat exchanger.

Fix with pictures in PDF attached.:beer:

Here is the fix..... Basically you take out the top burner and pinch shut the top fan (I used a vise). The bottom fan on the top bruner is still required for lighting. I'll try and post the pic when I get a moment. From Mr. Heater: The Big Maxx unit heaters have one or two roll out sensors...

:deadhorse I just installed my new 75K Mr Heater and I am having the same issue as the original poster. Does anyone know of a quick fix? The HiLo / Rollout switch keeps tripping? Thanks

Home Depot nailer deals FYI http://www.fatwallet.com/forums/hot-deals/1059079/

I ended up going 18" from the back of the fan. No big deal now. Thanks!

On a 75K Mr Heater Big Maxx it says you need 18" clearance from the rear of the unit. Do they mean from the housing, or do they mean from the rear of the fan? Thanks,

Ryan, vent through the will would look out of place, since it is an attached garage. I wish I could. Chimo, yeah I'm going to call the mfg. Also, I'm going to look at moving it. However, the only real place to put it is in one of the bays. It may interfear with my garage door, or lift I...