Search results

Probably both. Just sets up a boundary point. Its a plastic chain so not really doing much

Never mind I didn't get the 1st pictures in your post it was just a dead link, but now they are showing Sorry Do you have the motor nameplate information?

Try this, its for 50hz motors but I think that should not mater in wiring

+1 Anderson Power Poles. Cheap, Easy and available all over the internet with sizes in the 100's of amps

"he doesn't like chrome" "its pitted" "its done to match other parts" "it faded" "it just looks horrendous" "he does not need to get laid"

Daylghted means it needs to be open to daylight and open air, not a septic or leaching system

I guess my only thing is that 1/2" plate do you bolt it on and off every time you need to flip it up? If so then why not just make a quick way to remove the arms all together with a pin or something, obviously you took them off to cut and weld them?

Geesh that's not a she shed.. Watch out that's an in-law apartment :spit:

Neat unit.. Though it could use some new stones and it would sharpen a lot better

I am in agreement, it just sparks all the time and the timing is handled by the rotor and cap

Now that's a good option

https://www.ebay.com/itm/25-Cotton-Cloth-Covered-Twisted-Electrical-Wire-Vintage-Lamp-Cord-Antique-Fans/111093148591?hash=item19ddaaebaf:m:mMREEDoXyGzLpwmsTGIs7Gw:rk:1:pf:0 What color do you want ? Never Mind you said 14ga.. Super easy to find 18ga and obviously I cant read :( How about with...

I had to do that with my Home unit for 3 days because the oil company's were backed up. So far this season with the slight increase in NG price its still about $200 cheaper a year to run the NG than Oil at my apartment building when I compared it 2 weeks ago but oil is going up so that tips...

If its like my old boiler you remove the bolt and it should swing out. if it has not been opened in a while it can be rusted a little and prying wont hurt it. Your previous cleaning probably was a pull the nozzle and electrodes from the gun and do a quick cleaning bend the electrodes and use a...

Depends on how much DIY you can do, or call around and see if you can get some to turn up a system you install. I know a few of the GJ's on here have had great success with that. I personally bought the Vacuum gauge, Pump and borrowed a nitrogen tank. Turned up 3 a few years ago with no issues

https://www.amazon.com/dp/B01710UZA6/?tag=atomicindus08-20 I have ones like these

If it was me and It was all new I would go with a multi head unit and not even look at other options. Maybe 2 2 head units, one for the bedroom 9k each and 2 for the other rooms 2 12k or something.. Trying to cool all that space with one unit and getting the proper amount of cool in other areas...

Will Roof jacks with in a vertical position ?

Buy her a newer iron that has automatic turn off built in :)

https://plumblineservices.com/help-guides/does-my-water-heater-need-an-expansion-tank