Search results

Not a lot to report. I filled in the edges and removed the sides on the table . It seems everyone is enjoying a vacation right now. So I’m guessing middle of August to get to the finishing . Daughter house is moving along . Should have the roof on by next Monday .

Next step is to bring it back to the business we got the Slabs from . He has a very large CNC router table. For 90$ he will flatten it . My guess is he will need to skim about a 1/8” from the top and bottom . Hopefully that will take care of the over flow . Getting closer . Next step for...

My Daughter brought my 6 week old grandson over for a visit. Grandma was able to rock him to sleep which gave us a few hours tonight to finish the river . Happy 4th of July everyone!

Just build a beam out of 2 PCs of 2x4 with 1/2” plywood sandwiched in the middle . Of course stand it on edge . When you put the plywood in the center leave a 1/2” gap in the middle. Then go to a Tractor supply or equivalent and buy a forged Eye with a 8” threaded leg . And 5 larger washers and...

Yes Sir and all of you gave me good advice . My pour table worked flawlessly so far ! No leaks but you were all 100% correct when you said it will find a way out . So in trying to keep the Epoxy in the middle river I failed. lol 😂. My Son in law wanted a raw edge on the table and at this point...

Nice work 👍. If I can get my table to work I plan on some smaller projects like desks for the Grandkids. This looks awesome !

From the little bit I’ve learned . Deep pours take 4/5 days to cure out . So if I do half a pour it should be just tacky the next morning. Tacky is ok to pour over if it drys to the touch let it cure out then sand the poop out of it before another layer .

My wife thinks the same way you do . I did think tarp was supposed to be tape . lol 😂. I’m hoping to have the daughter and her hubby over to watch around the table for leaks . I’ve got a roll of gorilla tape and pee pads ready .

I do have access to a large shop with a 60” belt sander . This will be my second option because it’s 90 miles away . First option is the shop I got the slabs from . He has a very large CNC router table that he uses for leveling. Hopefully he can handle 9 ft long . The tape on the bottom is...

Kind of hard to explain. Basically I positioned the Slab in the table where I expected it to be . I then traced the outline of the river so when I lifted the slab up and put a block under it . This will give me enough room to apply a small bead of caulk along the outline. I will do this to...

Happy Father’s Day to everyone! I got to relax and work on the table this morning. I flipped one of the slabs over to the bottom side and Tyvek taped one of the cracks on the ends . I’m hoping this will keep the Epoxy from flowing out the bottom . I re-siliconed the pour table on the...

I plan on damming up the river and the two large cracks on each end with plastic lawn edging. It’s cheap and they claim the epoxy will release from it . After the Slabs are placed I will shim under the frame to level the table. I plan on making 3 hold down bars over the top and clamping them...

Everyone will have to tell me if I’m Nuts or if you think this will work . I built a frame and set it on the bucket toppers. Then I built a 9ft-4” long table with 4” sides . I still have some caulking to do and I might tape over all the corners. Should be ready soon for the pour .

So far this was the winner for the base . My daughter’s house will not be done until September so I have some time . They want open underneath. I’m a little concerned about sway in the frame.

Beautiful table I’m hoping I can do half as well!

So looking for some advice on the pour table I’m going to cover it in Tyvek seam tape and the same with the sides . I’m then going to Silicone caulk all the seams . I’ve decided to use bucket toppers to build a 2 ft high table . They are a top with grooves in them that you attach to a five...

So a little background. My son-in-law. Is an Arborist so the idea was to take logs he has cut and build something. ( He has some good videos on YouTube under( Haas Tree Care ) . Good drone shots and hanging from the top of trees. He supplies logs to a small business called Beneath The Bark...

Building an Epoxy River Table for my daughter’s new house . Does anyone have a technique for reinforcing the Epoxy in the river ?? I’ve seen people drill holes at angles into the sides of the river edges in hopes the Epoxy will fill the holes and provide some additional strength. I’m...

Do you consider a Festool track saw a hand tool ? I think it’s something he would use more often .

Torque Test Channel on YouTube. You will find every review on impacts you want