Search results

When I moved mine I rented a 28' box truck with a liftgate and loaded it strapped it down and unloaded it by myself. It was $70 for the truck with insurance. This is a classic 78 fully loaded.

If it was well insulated I think you could get away with 2 10.0kw electric heaters. It would be about $1.43 to heat for 1 hour based on your 7.15 cents per kwh. I would put in a couple ceiling fans with them though to keep the heat where your working. You would need a 50 amp breaker per heater...

Thats exactly what I did, except on mine the builder put in about 16" of blown in over the living area. I decided to use the batts instead of blown in because its easier to get around up there, and it can be pulled out for future upgrades. My garage is about 600 sq ft and I have a little over...

http://www.rapidairproducts.com/ When I eventually upgrade my compressor, I will be using one of the systems from the link above. I like the Airnet but might use the Duratec instead. Either way these systems are designed for compressed air and look easy to install.

I know this post is a few months old, but I have three of these in my 600 sq ft garage and am quite happy with the output. Much better than the incandescent fixtures they replaced. I think they were $39.99 each and I put standard cool white bulbs in them.

Wow I agree, that is a beautiful table Steevo

Check out Chromalox's line of unit heaters. I purchased the 7.5KW in the LUH series, but the HVH is more affordable. You can get a 24v transformer and also a fan switch for summer use. I will be making a thread shortly about my install. I got mine from Electricheaterwarehouse.com and they were...

I have three of the Lithonia ones that Pattenp posted from HD in my 600 sqft garage and they work great. You could always add another one at the end of the garage to add more light when the door is closed.

That is true, I could back it in, but I would still only have about 1 foot clearance on either side which wouldn't let me do any type of brake/tire/suspension work. Also even though I would clear up the front two spots I would then have to take up one side with equipment and my workbench so...

Nice box Klarmie, or would you consider that more of an office? :bowdown:

Happy Birthday Dennis111, I hope I make it to 57!

Also I would only use quality micro fiber cloths on it.

Have you tried an auto spray detailer, like Meguiars Final Inspection?

The reason I'm putting a maxjax in the left front on mine is because my back "shop" is only 11x15 so with a small car there wouldn't be much room to work around it if it was in the back, plus I need to put my suv on it. Then you have to consider pulling an engine would be impossible with it in...

Congrats on the lift, I can only imagine how you feel. I can't wait to get my Maxjax. How close is the left post to the wall, and do you feel it provides enough clearance to work on that side?

So much hate for the oilless models, I've had my Craftsman Pro 25 gallon 2 stage oilless for at least five years and its been awesome. It's actually pretty quiet, I can have a conversation while standing right next to it while its filling. I've ran die grinders, impact wrenches and ratchets all...

I bought a new house last summer and my garage is identical to that drawing. I'm also planning on getting a maxjax installed on the left front just like you have proposed. I'll have to go snap a pic and post it up in the next couple days. So far I'm happy with it, it is smaller than my last...

http://www.mathesondirect.com/product/34461/Miller_907422_Millermatic_211_Auto-Set_with_MVP_MIG_Welding_Package I'm also looking at buying a 211 and this place is local to me, haven't been there yet but they have the lowest price I've found. I might still go to airgas with this price and see if...

I lived off of greenburg and north dakota a couple years ago, small world. I messed up in my earlier post, the bulbs are rated at 2800 lumens, and 4100k. Btw each fixture was only $40

nice, looks good. how tall are your ceilings?