Search results

Think he said it was 2.5 inches to stop any big cracks.

Thanks I didn't get that many pic of the install, but my meter box mounting holes fit right on top of the high ribs. I had one in the center of the box so I cut down some conduit to match the height of the ribs and put some putty around it to keep the weather out. Then a o-ring 2inch main...

The gateway uses the 900 MHz frequency to talk to the opener so it's not quite as clean as using the original remote frequency garage door remote openers (after 1997) they operate in either 310, 315, or 390 MHz frequency ranges. At this low of frequency they can travel and penetrate better. but...

I ordered my LM8500 from here got it in 2 days. The MyQ is just $34.95 through them, going to get one after Christmas if it doesn't show up under the tree. https://direct2ugaragedoors.com/liftmaster-828lm-myq-internet-gateway.php And I think it communicates wireless via 900mhz signal

Mind sharing were you got it, I've had a couple of the ultrafire 502 lights http://www.ebay.com/itm/1000LM-UltraFire-502B-CREE-XML-T6-LED-Tactical-Flashlight-18650-Battery-Charger-/161110489978?pt=US_Flashlights&hash=item2582eefb7a#ht_4238wt_926 they work great just the switch goes bad.

Has anyone seen one of these cree style lights that just has an on/off switch, I dont like the strobe and you have to click pass it every time.

Here's some pic's of the finished breezeway And I got some shelves built out of the leftover 2x4's and some metal sheeting I had Also I went with on CFL's for lighting, they were just to cheap to pass up. they are 85w-400w equivalent, and so far they've been great...

Thanks 2manycars :thumbup: Wish you the best with your house endeavors, it can be a trying experience for sure. I've been trying to get this construction finished and move all at the same time. My C5 has turned into a mostly weekend autocross car, you just start upgrading and one day you...

It was just some roofing felt paper to keep the concert off the walls. The breezeway is starting to go together, hopefully it will be done tomorrow.

I believe it is 120x80, have an extra 10' on the far side and about 15' on the back and thanks 06ramctd

Not sure what the R value is but reflects 97% radiant energy, and I can tell you it about 10 degrees cooler them my dads garage in the heat

I'm pretty sure it was W. R. MEADOWS curing and sealing compound but forgot to take a pic Looks nice and cleans up easy but isn't as durable as most epoxies, sliding heavy stuff can scratch it http://www.wrmeadows.com/cs-309-25-acrylic-curing-sealing-compound/

Changed a few things but still have to get a new ground wire to reach the panel

My electrical I've been working on also

It makes sense to leave some extra wire in the box, even though I doubt I'll ever fill it up. I was leaving room between breakers for an heat just because I had the space, and cutting the circuit wires short to save some $ guess now not the time to get cheap. I did add some Anti-Oxidant to the...

I actually have the ground bar to the meter box ground wasn't sure if that was a good idea. But the other green wire is the welder ground to the neutral bar. And I have 2 ground rods 8 feet apart.

This is my first time installing the main service, it's an 200amp I got cheap a little overkill but guess I got room to grow. No real inspection here they said they would give it a lookover before installing meter but I want to do it as close to national code as I can. I'm still missing a couple...

Got my door opener up, running it off an extension cord right now. Still working on getting electrical all done. The opener is a liftmaster 8500 its an excellent opener except the range of the remote, my homelink on the truck work farther maxed out maybe 100ft. but operation is smooth and quiet...

Got some of my junk moved in and decided I need to build shelves so that's on the short list to get done, but right now I'm working on electrical. got the panel and meter box installed found a couple cabinets at a local factory outlet $15 a piece, didn't think I could buy the wood of that.

Might have to give that a try, bet it would look better them they do now. They are a 4'x3' simonton window