Search results

I'm not sure how that can be blamed on the lift? It should have a safety switch on the top to cut the motor when the roof hits it. It either wasn't installed or not wired properly, leaving fault on the operator, as well as the fact that person pushing the button should be watching!!!

Pm sent!

Re: Garage Mahal Build in Brenham Texas (BlueBell Country) U got that right!!! Impressive shop!

1/2" rapid air kit These are from before I installed the lift, insulation, front wall and work bench. Nice system, wouldn't have changed a thing.

I did the 3/4 rapid air in my shop. I went up into the rafters from the regulator/filter. T'd it at the top and took one line all the way to the back and down the back wall and put an outlet outside for trailer tires and spraying paint outside the shop. I went forward from the T up top and T'd...

If your current tank is in good shape I would go with the 60 you like and plumb your current 60 tank to it for 120 gallons.

I use a standard craftsman spark plug socket and ground down the business end of it (to a point if you will) so it doesn't get stuck in the plug recess of sbc heads. Always works great with a ratchet or wrench depending on clearance.

^I would put it outside as well, for those reasons but also due to noise. I had a 3x3 concrete pad poured on the exterior for my compressor.

I found some red rubber hose by the foot at lowes when I did mine. Forget the psi rating but it was plenty for what I needed.

Came in today!

Re: The Green Tools **** First snap on purchase since I was a tech 10 years ago

Pic of camaro loaded further back. I went asymmetric so I can have more room in front of it and my jeep cj, and be able to get out of the camaro (long doors). My shop is not very deep and the door is in the center. I put the lift at an angle in the corner so I can still park a vehicle on the...

Took a minute to find, all I have.

I have an xpr-10A and use it for the wife's tahoe and my 1500 crew cab no problem. I just pull more forward with them vs my Camaro and cj-7.

He's going to start sending me the monthly specials. I might be in trouble....

My buddy (the tech) ordered me a fhf80g from his so guy today. It was $109.95 from him vs $129.95 on the so website. Keep in mind he has spent a lot of money with this guy over the years.

I blame this awesome forum for making me realize I need it too...

Funny you brought this up. I'm a weekend warrior working on my vehicles and some friends as well. Always used my trusty rp craftsman ratchets. Last week I asked my buddy that's a tech to pick me up a 3/8 snap on flex dual 80 next time the truck comes around. Like you I want a new go to premium...

Order placed, thank you!