Search results

MAKE ME AN OFFER ON THIS STUFF IT NEEDS TO MOVE THE MORE YOU WANT THE BETTER THE DEALS!! Any order over $50 is shipped on me I am in the process of cleaning the garage and will be posting more as I clean more so check back. All of the items are in good used condition unless otherwise listed...

Please let me know where you can help, Need the 1/2 Blue point more than anything

I have a long handle Matco 1/4 with an orange hard handle, and it is my go to ratchet for 80% of the work I do.

Please make some offers on this stuff! I assure you I will not be offended

I always put in my ads that its first com first serve, I also have been burned a couple of times from no shows. So I take the first person that shows up with cash, on that note I am very straight forward with people that want me to hold an item that I will be selling it to the first person that...

This is one of the compressors that I was speaking of. I guess it didnt "Blow Up" but there was certainly enough damage that stemmed from it.

If you do go the route of dis assembling the compressor spray on a few coats of Purple power and then pressure wash the tank. I have read about people that have cleaned the corrosion out of their tanks with an acid based cleaner and then coated the inside with an epoxy sealant like what is used...

One of my co-workers decided he could crank his black max compressor up to 180 psi output and it blew the bottom of the tank launching the compressor in the air. The compressor hit the rafters in his garage and broke through 2 of them before falling back on the floor. There was a bunch of damage...

I have torn down several old units, and found that it is not hard at all to separate the pieces. I like to open up the tank through either a bung or an air inlet to stick an inspection camera inside to asses the rust and corrosion to know whether or not it is going to be worth restoring. Of the...

Bump Prices lowered Please feel free to make an offer on any, or all of it.

Fuel Injector adapter Set Snap on Set consists of all the pieces displayed. At a replacement cost of $18-$30 each this is a great deal for anyone at $50 shipped OBO Snap On ratcheting screwdriver with case and bits. Everything pictured in Snappy including the bits. Driver is labeled "Racing...

What about a spring mech similar to that of a tape measure? I am not an engineer but have taken a bunch of things apart. I would think that if you had a gear on one side with a locking mechanism that you could drop down on the teeth of the gear to lock in place and lift up to retract. This is...

Most have not been used, yet a few have a little surface rust from sitting. I have coated them with oil to stop further corrosion asking $70 shipped or trades, please let me know what you have. Same set sells for $125 new SOLD Looking for Matco or Snap on Screwdriver set, Snap on Torx bit...

On the same subject, (and with far less of a pocket book) does any one know what type of lift this is? I would be interested if it is cost effective to convert it to hydraulic or pneumatic. http://minneapolis.craigslist.org/ram/tls/3871039435.html

I was reading that thread before I posted. That is what prompted me to ask for opinions on paint and clear coat over the top. Sorry my post was a little bit all over the place, that's a prime example what happens when you don't proof read what you type.

When it comes to the floor, I have worked in some very shabby structures and installed tile. If you are concerned with the flex in the floor you can put down an additional layer of plywood with an opposite orientation than what is in there now. On top of that you would use 1/2 inch cement board...

I helped a friend with some tile work on his house and wanted to share with the members a little of my handy work. I have installed flooring for nearly 10 years, and started my own company in college to help pay my way. The home Owner was concerned with a straight lay in a small area and how...

I have been in the process of restoring a couple older tool boxes, and have tried everything from the single stage paint clear coat combo to using rattle can and everything in between. My question Is it necessary to use a clear coat over a rattle can paint job? If so what do I stand to gain by...

I will have to look into that. i was planning on buying a bottle on the net but should reach out to the suppliers in my area to see if they have any good deals

I dont think that I will be using it all the time, but there are always things coming up to use it on. This will be my first welder so there are tons of projects lined up on my list otherwise im sure it will be a once or twice a month after I finish everything piled up.