Search results

I own both 1/2 drive and 3/8 drive Torque Wrenches. The 1/2 drive has a larger scale, ranges from 25 ft/lbs to 250 ft/lbs. The 3/8 drive has a larger scale, ranges from 10 ft/lbs to 100 ft/lbs. Most of my torque wrench uses require the 3/8 drive torque range. As for the 1/2 drive, I use it...

Drain the hydraulic fluid and drop it off at a metal salvage yard.

I have always wanted Knipex snap ring pliers, but I don't run into many situations that require snap ring pliers. As a result I have not invested in a set due to return on investment. The SK pliers look quite nice, but I am not sure of the cost...

I have the same problems with those Matco Screwdrivers. I use brake cleaner and the writing is starting to fade, but the green sections and flocking come out very clean. Never tried WD-40 because of the slippery residue, maybe I'll start using WD-40.

My Wilton vise has "Schillter Park Illinois USA" molded on the casing, the craigslist vise apears to be an Imported Wilton. It's a great deal regardless, make a move on it, there will be no regrets.:bounce:

NGK:thumbup: All my small engines have been replaced with NGK if they are not OEM. I have no problems with start up's & performance.:D They are: Honda Lawnmower Karcher Pressure Sprayer with a Honda Engine Ryobi blower Echo Weed Whacker Echo Chainsaw I have used champion (all variations)...

The answer is YES. Although my SAE collection of tools is very small the need exists. Please use the right tool for the job. The expectations of Auto Technicians is to have the correct tool for the job, a shade tree mechanic will use alternative methods to perform the job. I have a large...

I have purchased the three piece set for $19 about 8 years ago. They are very good and worth every penny. :thumbup: Never had one fail, the larger 30 inch version does flex when it is stressed, but never broke. Also never had a need to strike the red handles with hammer.

First, I don't think the issue is "HOW CAN MECHANICS AFFORD SNAP-ON", it is a matter of tool acquisition. Auto Techs need quality tools perform services and tool trucks will usually have the right tool for your needs. A tool supplier or Sears will not deliver to your place of work, the only...

I do not know the environment for Auto Mechanic work, so my recommendations are based on a Semiconductor manufacturing & Aerospace manufacturing. 1. Redwings 2406 Men's 6-inch Boot with the Aztec SuperSole® 2.0. I was a NDT inspector for an aerospace manufacturing company and one of my duties...

2nd that:thumbup: I have two KYB/NORCO 20 ton bottle jacks, standard size & shorty. They have been in use for over 10 years and no problems with them.:thumbup:

I do not know how long you have been retired, but we are moving at a very fast pace, with new technology & factory builds.:beer:

Don't know if it qualifies as a mechanic? Semiconductor technician: working on electromechanical semiconductor equipment in a state of the art factory automated fab.

Here is some Love for CORNWELL, although I don't own much Cornwell, but what I own they are pretty good: I agree with the socket quote, own a 1/2 drive metric chrome deep sockets and it appears they were designed for hand tools only with no thought for air tools. Their ratchet is a very good...

VERY NICE:thumbup: I am impressed with the shine and fit from the photos posted. Question: Are the crowsfoot flare nut sockets as good as the snap on's? Snap on is legendary for the minimal amount of flex and are the best on the market. How do they stack up to the Snappy? Thanks.

"What do you car guys tend to use more for brake, power steering, and transmission cooling lines...SAE or Metric? Do certain manufacturers always use one or the other for the line nuts?" Recently, My 1991 Honda Accord needed the high pressure power steering hose replaced. The original worn out...

The MG325 is a great purchase and you will like it. :thumbup:

Own a 25 foot Goodyear 3/8 hose that I purchased from Harbor Freight and a 50 foot 3/8 Flexzilla hose. I use the Goodyear the most, not because it is a better hose, but due to the length, because I work in a two car garage. Phoenix AZ is not a good test for the cold, so I cannot attest to...

I own a sears craftsman timing light with an inductive pickup and two power leads (pos & neg) which I purchased about 15 years ago. Didn't purchase a light with a dial, not sure how to use the feature. I just use the timing light for verification after distributor and timing belt change and...

I think you are trying to remove a broken bolt from the axle housing or hub. On my honda accord, I converted my hub from a Accord style to the Acura 2.3 CL Hub. This included replacing the hub and bearings which solved the broken bolt problem. I am not sure if you are wanting to replace the...