Search results

I grab my 3/8 drive first, second the 1/4 drive. The 3/8 drive are used to loosen the bolts or nuts on automotive work, then I will will use the 1/4 drive to remove the bolt or nut. I work on Toyota's or Honda's and usually encounter 8, 10, 12, 14 mm sizes for most repair work. The larger...

I assume you are talking about brake & shifting cable. First is the cable housing which shields the inner cable bikes have one of the two or both types: Conventional spiral housing can be cut with a good diagonal cutter or a Shimano SIS cable tool or equivalent made for bicycle cables. When...

I own two sets of EDGE metric 3/8 drive sockets, standard drive chrome socket & semi-deep/mid length impact sockets. Briefly I had the 1/2 drive metric EDGE set, but sold the set because the set was has the same sizes as the 3/8 drive. Both sets purchased as new or near new on ebay. Sockets...

yes, they are the best looking. From the smooth profile and the quality of the chrome.:thumbup:

My first torque wrench was a click-type 1/2 drive craftsman. The instructions said to release the tension, but did not specify which setting to use. So I backed the tension past the lowest setting and unscrewed the handle mechanism to the spring. Craftsman only has a one year warranty and...

I am a DIY and work on Toyota & Honda. Both cars use metric fasteners: 8, 10, 12, 14, 17, 19, 22, 24, 27, 30, 32 & 36mm. As a result, I have accumulated a vast array of metric sized tools. SAE fasteners on a Toyota & Honda cars occur when other people replace a metric nut or bolt with SAE...

My first Impact wrench was a used Mac Tools AW434M from Ebay. It is a magnificent wrench From the weight and build to the sweet sound. Also the Proven Bullet Proof Twin Hammer Ingersoll Rand design. But when I could not remove a crank pulley bolt from a 1998 Toyota Tacoma 4 cylinder engine it...

I live in Phoenix Arizona, where rust is not much of a problem, here is my method: I was able to spray PB Blaster or equivalent and let it soak for 1 hour and then using a #3 phillips with a combination wrench to turn the screwdriver usually works in most cases. When the phillips head is...

So, do I want a Snap-On Snap-On MG725 (1/2" drive, 810 lb.-ft of torque)? YES, I own one and it is a wonderful 1/2 drive impact wrench. Alot of folks like IR, I have used a Mac Tools AW434 and it was very good. Or, do I want a Snap-On MG3255 (1/2" drive, but only 425 lb.-ft of torque)? NO...

Proto Sockets and Ratchets are quite good, you will never regret your purchase. Personally, I think they make the best socket extensions: They have a clean jewelry type finish The retaining ball mechanism is just tensioned correctly. They release quite easily, even when your hands are greasy...

HOMESALE, I took the whole strut unit to a garage and had them replace the struts for me. It cost $20:thumbup: Most auto parts stores carry the screw type compressors either to rent or purchase. They are usually under $60. The picture that SAMMM posted is a really nice stick unit and will...

I purchased the exact strut compressor. It is kind of bulky and it takes a couple of tries to understand how it works. When you figure it out and use an impact wrench to compress the springs, it is worth the money. The clam shell compressor does not work well for tightly spaced springs, it...

Majority of my pliers are Craftsman and they have served me well. I am not a professional who uses tools every day, so I cannot attest to the longevity. As for a DIY person, they work well in my tool box. The black handle tools are the ones I like, the pro series seem too bulky to use...

I work for a Major semiconductor manufacturing company and the tool boxes we use for equipment maintenance in a Clean Room Environment. Lista Cabinets, stationary & mobile Snap On KRL cabinets Drawers: Both cabinets have a safety feature that do not allow multiple drawers to opened at the...

Only have 3/8 drive metric sockets. Craftsman Flex sockets 10mm - 19mm Snap On Flex Sockets 10mm - 19mm I am not a mechanic who uses tools every day for a living, so my tools do not have usage. In my case, I have never broken either sockets. As with any snap on and craftsman comparison...

I was just wondering if Lista Cabinets are widely used? They look quite nice and hold tools quite well. How do they compare the Tool Company Boxes, Snap On & Matco in particular? Can you add pros and cons regarding each? In my case, they would be my tool storage in the garage.

Well Said. I own both Matco 88 & 60 tooth ratchets & Snap On 80 tooth ratchets. Both work well. As Fedwrench sated, it is a matter of personal preference and accessibility.

I have a small tool bag in the trunk of my car that contains: 3/8 & 1/4 drive metric sockets Socket extensions Set of metric combination wrenches 8-22mm 3 Phillips screwdrivers, mini, #1, #2 3 Slotted screwdrivers, small, medium and large Pliers: Needle nose (regular size & mini), diagonal...

I have been eyeing this tool and will purchase within the year. As for what I have: Metric Flank Drive Plus Wrenches :thumbup:

Snap On tools are the Professional Brand. Has more trucks/dealers in most areas. Larger tool trucks with more inventory, for that just in time delivery. Ease of financing for Technician needs. Majority of tools and equipment are well designed, a large R&D budget allows for design...