Search results

chrome plugin helps with all pics

agreed, last I checked the 7.3 took ~3 gallons

And if you have connectors that are not used, tape them over/back onto themselves, so you wont think the tape fell off

as long as it's 2" the entire way, and not just the risers, with direct burial in the dirt for the run

grab a couple sheets of rigid foam insulation, cover the opening, just to see if it has any effect

you need radiant, tube heaters work pretty good for heating the floor, you need ceiling height for them though this type...

fixed mount, and to limit the loading on the ball, leveling jacks, or at least jack stands, at the rear of the trailer so driving on/off doesn't try to lift the front up

Not exactly garage related, but anyone from the midwest, specifically SE Michigan, have a privacy fence installed recently? I'm curious on cost, I plan to get a few estimates, but am wondering what ballpark I can expect.

3-3-3-5 SER should work fine for your free air crawlspace run

no biggie, if I end up doing this I'll be renting a trencher anyway, be quick to do 2

I'd be leaning towards this, if the meter wasn't on the other side of the house

ok, if the dryer line is smaller than 3/4, can I go back to where is IS 3/4, and run 3/4 to the "T" to the garage/dryer?

20x22 garage, I am going to be trenching for electric in the spring, and am thinking I might as well run a line for NG for a heater.......Question, what type of line and what size? looks like 50K BTU would be a decent size for the garage, so sized to feed that 20x22 garage, ~30' from house...

Motion flood Sent from my SM-G530T1 using Tapatalk

set down the potato and pic up a camera next time

ok, what do I need, vinyl siding, interior is open for now, what kind of box, etc.?

Yes please...........

yeah....are there DIY plans, or what

2 8 foot doors spaced apart, man door between them?with that depth you could put a bench at the back of the garage, towards the middle if you need the depth for the hoist bay, or even free standing between the bays

read post #3, he describes it