Search results

I have an industrial series craftsman box from the 90s it’s a Waterloo. It has aluminum dividers in some of the drawers that are attached via screws from underneath the drawer. I’m having a hard time finding them or the aluminum extrusion profile. I’ve spent hours looking. Anyone know what this...

Added some 3d Printed battery holders to each side.

Sometimes, yes. I have a lot of the Milwaukee tools. Typically I'm using 3-4 tools at a time. The M12s go through batteries pretty quick. I use the standard batteries that come with them. The M18s go through them super fast. If I'm using the Circular saw the number of cuts per battery is in the...

This was version 1 at my previous house. But it made any changes too difficult. And it was a hassle to get the big battery in on the right. So made sure I had more room this time. And of course, more batteries!

In one of my wall cabinets.

I really hate cords. They make everything look messy. With so many charging stations I like to make them a little more organized. So this is what I came up with. Parts 3/4" MDF for the frame behind the front (it's angled) 1/4" ABS I'm starting to prefer ABS over wood I use this stuff...

Milwaukee M18 18V Li-Ion 5/8" SDS-Plus Rotary Hammer (Bare Tool) 2612-22 New from CPO on eBay for $159. Only 8 left. http://www.ebay.com/itm/Milwaukee-M18-18V-Li-Ion-5-8-SDS-Plus-Rotary-Hammer-Bare-Tool-2612-22-New-/332189093733?epid=215494781&hash=item4d58034f65:g:fqEAAOSw5wBZg3mj

If you are open to using home automation you could use one switch to trigger all. You could then tie it into your lighting as well to have one button that shuts the entire garage down.

Looking to purchase a G0704 Mill and hoping to find any coupon codes to save some on the purchase. Anyone have one? Thanks.

Still trying to figure out the water heaters. Almost done though. May build a wall around them, may leave them as is.

I have too many Milwaukee's to list. But here's my charging station.

Yup been googling like crazy with my mad Google ninja skills and zero luck. That's why I'd figured I'd try here. :-)

Yes. I've been able to find the box via google search on sears outlet. But none are in stock unfortunately. http://www.sears.com/craftsman-professional-2-drawer-intermediate-chest-36-in/p-00965567000P

Thanks. Just called them and they said they do not make a middle box for the 36". I know I've seen them...

I have the 36" long Craftsman Industrial tool box. They used to sell a middle chest for this but can't find it anywhere. Was hoping someone might have an alternative or know where stock can be found. Google has been no luck.

A little closer. Still working on the edging of the flooring and where the toolbox will go. Originally it was supposed to go next to the water heaters. Long story short the water heaters had to be moved out 7 inches from the wall. It threw off all the plans and now the box won't fit with the...

Got the cabinets up and the under cabinet LED lighting installed.

Finally got the racks fully installed and leveled. Hammer drill didn't do anything so ended up renting a roto hammer. Roto hammers are the way to go.

BUDGETSHELVES.COM They are a local Seattle company. Not sure if they deliver or can recommend a dealer around you.

A little progress today. Started on the rubber wall base today. Also had to change up on the shelfs in the back corner. Went with a rack type setup instead. It's 2' deep by 8' tall. The larger section is 80" long and the smaller 40" long. Fits the space very well. Will have the rest of the rack...