Search results

Cleaned off this SO roller, waiting for a tire fix.

Horizontal flat areas are my nemesis and I shouldn't buy any more.

It was 105° at the pool Wednesday and 75° today. Trying to decide on the Snap On(KRA 398A) cabinet tires. The tires on it were made in the USA but have cracking. I can't get one side of the tire under the rim bead. New tubes but might need new tires. And I actually cleaned most of the top...

What about a DIY Mr. Cool mini split?

On MP.

I'd think whomever does the work would decide on what machine works best for the job.

Grandson and I rolled the 60KW genset out of the shop on pipes.

KRA 398A flat tire, I didn't think I'd have to remove the axle to get the wheel off! Axle is 3/4" diameter and most replacements are 5/8".

No issues with condensation from the swamp coolers.

Feb 23 1926 patent

I spotted this on MP, anyone needing it?

Maybe, I see 22 nails per 10 foot board @ 160 boards. I'd have arms like Popeyes after all that. Cooler with the door open, but still hot.

I'd bet after all the nails were removed they'd be in sad shape.

Steel Grey. Yes, replacing the roof panels and insulating the underneath side would make a huge difference. But the almost 70 year old 2x6's would need to be replaced also. No free lunch here. I moved the smaller cooler from the doorway and closed the door. About thirty minutes later.

I already have two 16'x16' doors on the east wall. No practical way to retrofit to the north/south ends. A fox or smaller won't have any problem entering this shop, plenty of ventilation.

Really need an open doorway for even this setup.

Vintage steel roof and siding. Largest evaporative cooler is on the north wall, second one is on a cart on the west side(open doorway). An opening and proximity to water make this the most practical placement. If I cut out the smaller cooler and close the door it's just hot. The north wall is...

Normally below 50%.

70-75° inside is fine but not.......