Search results

The Honda GX390 clone motor works great and the generator has alot of nice features I buy and flip generators a few times a month......just never encountered this issue before I'll try to find a new yellow replacement tank, which should be a 7 gallon tank

Who has easy access to a concrete mixer lololol

Yes the inside is rusty I flushed a ton of rust out but its still bad

The tank appears to hold 7 gallons

I need to verify and make certain this product works I need to watch some reviews Spending $30 is one thing, but finding out it doesnt work and having to spend $75 then on a new tank isn't cost efficient

I usually buy used generators only with plastic gas tanks, for a good reason. This last purchase was with a metal gas tank. After draining the old fuel, I discovered a good amount of rust inside I removed the tank and hosed it out,but there's still rust chips inside. I even soaked it with...

I forgot to update this Some of the buried wiring was chewed on and I think was shorting out the system? I replaced 2 light fixtures and ran new wiring.......everything works and functions fine again

I picked up a 350cca UL1 sized battery today at Tractor Supply Old battery was stamped 5/2019 New battery is stamped 5/2025 Installed and started up immediately $60 with tax

I have an Group 26 525 CCA/715 CA automotive battery in my 18hp Briggs powered golf cart. Seems to be holding up great I might look and see what a similar sized automotive battery would fit in the mower battery compartment

I always charge it before storing it I usually charge it once a month during the summer Batteries ate just that, 5 year rentals

Guess what Time for another battery It will charge up completely fine However, once the battery is installed in the mower and it sits for a week, I need to use the jump pack

I did initially order the carb but returned it after it arrived and I noticed several design differences I had to order the bowl bolt from the UK!!!!! I feel better knowing that the motor will run with the quality OEM carb

New air filter, gasket bowl gasket and bowl bolt should arrive today I wanted to keep the carb OEM and not risk issues with a $25 Amazon carb, so I took it all apart and just threw it in the ultrasonic cleaner It ran great before the bowl bolt broke so I'm hopeful it will start and run great...

A GX340/GX390 Starter Motor was a direct replacement, fit perfectly It also cross references to the Predator, Generac, Duromax 389cc 420cc 439cc petty much a universal starter for 11hp-13hp engines

This seems to be the replacement bolt, but I cannot find a part number I would assume this bolt can be purchased separately from having to buy the entire carb assembly

I took off the stock carb and ran it through the ultrasonic cleaner. Looks great! Now if I can find a replacement carb bowl bolt for the fuel solenoid that isn't $35 and coming from the UK

The 390cc starter will fit, it's been ordered I will report back

Well lesson is, measure twice.......or five times I don't think I zero'd the calipers when I measured before? I checked the block and the old starter this morning It's definitely closer to the 84mm of the 11hp-13hp starters online for a fraction of the cost of the OEM unit Again this is for...

You would think my PT1300EG 389cc engine would use a 390cc starter However, look at the specs on the mounting bolt spacing: https://a.co/d/hRGeuo9

This Amazon link for the 338-459cc starter looks to have way to large of mounting bolt spacing: https://a.co/d/hbHIgDH This link for the 240-301cc starter looks close https://a.co/d/bx1C5sj I just do not want to pay alot for the starter and figure there has to be a more universal starter...