Search results

Hello Dachev! The good part about the 137 is it's ability to repel liquids. However, it also hampers connectivity to other products. The Kera-Quartz will likely fish-eye like mad and not connect to it. Do a water test, see if the water beads/pools. Here is my email, [email protected]...

Hello Georgia! Sand/Scuff in preparation for coatings, wipe clean with denatured alcohol, apply one coat of pigmented urethane or polyurea (white), then follow-up with a clear-coat. These products will not amber/yellow like your epoxy and the clear-coat will help prevent scuffin and tire marks...

BACK IN STOCK! Link: https://www.legacyindustrial.co/products/hellfire-concrete-coating/ Appreciate everyone's patience while we re-formulated this popular product!

WINTER IS COMING

M.Michael: Watch our video for a little more insight:

Make no mistake, what we see here is XTREME!! If it were mine, I would pressure-wash it, allow to dry then I would flood-coat it with a densifier. I would not attempt to put any film-forming sealer on this floor. Here is our offering...

XtremeSet100 for a flush repair! https://www.legacyindustrial.co/products/xtremeset-100-crackjoint-filler/

Nohr-S Polyurea, good to 33 deg f. Cure will take longer but it will kick!

Looks legit

Hello GJ AND HAPPY THANKSGIVING HOLIDAY! We are happy to offer a 12% off sale on our Nohr-S® Polyurea Kits. Nohr-S® Polyurea Aegis Coating Kit Nohr-S® Polyurea Full Flake KiT Using discount code: blackfriday2024 Receive a 12% discount, Effective today and through Tuesday December 3rd 2024. (no...

Hello GJ AND HAPPY THANKSGIVING HOLIDAY! We are happy to offer a 12% off sale on our Nohr-S® Polyurea Kits. Nohr-S® Polyurea Aegis Coating Kit Nohr-S® Polyurea Full Flake KiT Using discount code: blackfriday2024 Receive a 12% discount, Effective today and through Tuesday December 3rd 2024. (no...

Thanks for sharing your results. When HD6600-MMA is used outside and it starts to look a little thin, it can be revitalized in many cases by misting with Xylene. This is especially useful when you use our product over pavers. Just did this recently at my own residence and I was blown away, it...

You don’t want to use that dust. The particulates are so small that there’s no strength left. Use dry play sand. This product is now available on Amazon by the way. https://www.amazon.com/dp/B09DJ3QCSW?tag=atomicindus08-20

Hello GJ! We are happy to offer an end of summer sale on our Nohr-S® Polyurea Kits. Nohr-S® Polyurea Aegis Coating Kit Nohr-S® Polyurea Full Flake KiT Using discount code: summerkit Receive a 10% discount, today through the end of August (no cash value or rebates on previously ordered material)...

Typically, the floor is last.

We had bamboo, 10 years ago. Our lab destroyed it in about six months. Scratched terribly. I have heard good things about LVP. However, our favorite interior floor is porcelain tile. Have had that in two houses now and it is darn near indestructible. Good luck

There’s a company called mighty tape or mighty stripe. Supposed to be very good..

You really have to spend a lot of time working on the rolling when you do a Full Flake. The best floors I have installed were with our polyurea, because of its longer working time, you are really able to roll out evenly. Some pap products have a very short working time and therefore it begins...

You would have to take it up to at least 200 grit using a heavy buffer or polisher. Our BonzaPad-Shine allows the user to buff the KeraQuartz to a higher sheen once applied. The actual polishing needs to be done with a hybrid polishing tool. 50/100/200 grits.

Yes, but we are still working on the tint. Coming soon but high-gloss will come first.