Search results

So I'm considering one of these at the current $25 price tag.... I've had two of the Braun ones and they developed a connection issue at the folding point that eventually made them useless. Hoping maybe @2ndGearRubber has an opinion on these...? Since there seems to be a bit of split and I...

Disclaimer, this is all super rough estimation and not modeling actual forces involved so it's napkin estimate methods that aren't directly applicable; Psi is literally pounds per square inch, you can't increase the psi by increasing the square inches. Also it's square inches , not cubic. So...

Icon 12" you already mentioned. Quinn extendable. Titan has a 10".

Epoxy and forget the expanding anchors.

Yes. I had a good example today. Not nearly as extreme but same scenario nonetheless. 97 f150 stich in 4wd. New encoder motor before I got it, switch tests to absolutely perfect resistance levels. 12v seen at the motor leads when activated. Testing supply to the transfer case relay control...

I dont think so. They are saying they will be adding it in updates but who knows if that will ever actually come. I believe it will support using a bypass cable though.

Oh, been using it about a month now.

I needed a cheapy scanner to carry around/use at home/ use at friends etc. $500 budget. Paid $370 for this on Amazon. Despite usually using the verus edge and autel 916 I am thoroughly impressed!! It's extremely capable as long as your working standard OBD2 stuff. I grab it 90 percent of the...

I've used a worm drive circular saw, diamond blade, and a hose on quite a bit of basement work to cut in for plumbing. Trick is to back-cut and let the saw pull itself along the cut rather than trying to cut forward. In your case I think even a geared circular saw would work, and maybe a regular...

Probably not even quite that , 1 1/2" I'd say

One thing I see nowhere else and I definitely plan to get from Olsa is the extractor wrench set....looks amazing...I want.

Yep. Only two real ways to gain range on the transmitter. Switch to unidirectional antenna or add power ie amplifier. You could add a parabolic reflector to either end with no circuitry involved. Still more practical to do on the receiver end. You'd have to experiment with the direction it's...

About $6

There's a ton of interesting stuff but I find they're pretty limited until about 9-11, I'm always buying them things a few years over their head. 6 is difficult. With my 5 year this usually turns into me letting him pull the trigger on the power tool each iteration and asking him to tell me how...

Way more minor but it's basic circuits to start with and easy evening projects. https://www.amazon.com/dp/B09K6637J1/?tag=atomicindus08-20

No mention of RIGID yet?

Hell, just the package will suffice. New trick to play on the kids though.

That is a battery backup bulb whether you realized it or not. Sorry, nothing crazy to see here. Here's the backup design. Note the globe is basically a dome on top and vents on side. It lights when you press the contacts because it's detecting that it is screwed in and has no power. Coolest...

Generally generically one would use angle head wrenches. These however ( if I understand correctly) are also made specifically for your exact purpose. https://www.amazon.com/dp/B00UME9JEC/?tag=atomicindus08-20

Assuming the pump goes on at 80psi and shuts off at 120 you would get .4 minutes operating the air hammer at 4cfm and it would take .84 minutes to refill again.