Search results

this is a 3/8 breaker bar, 12 inches long with a red hard handle. the handle would be the same as proto hard handle big dawg ratchets, proto spin flex ratchets and older mac ratchets that featured a hard handle.

i am always on the lookout for kra-65c's and their variations. last week i stumbled upon a kra-149 while searching for a kra-65c. very similar in size to a kra-65c but taller with a drawer and tray rather than a sliding tray. the last 2 pics compare it to my kra-65c

quite a few years ago, milbar made a pliers like tool for removing and installing the retainer clip on roller chain master links. i have been trying to source one but they appear to have been discontinued. i know that milbar has changed to stride but still have not had any luck with my search...

a kra-65c is the little metal hand box that several of us have, i have seen them sell for 300+ dollars and rarely can be found for less than 100. usual price is 150-200 on ebay and they have not been made for approx. 10 years. three questions, if you could buy a very similar but not identical...

simple. build an adapter that accepts the new slide on 20 volt max batteries and will snap into the old standby 18 volt tools. offer it up at a reasonable price and old users with a drawer of misc. tools will jump right on the bandwagon and encourage the sales of new 20 volt max tools. dewalt...

i am looking of the following bonney combo wrenches 1118h - 9/16 full polish long 6 point 1120h - 5/8 full polish long 6 point meb12LH - 12mm full polish long 6 point meb15LH - 15 mm ful polish long 6 point meb16LH - 16 mm full polish long 6 point meb18LH - 18 mm full polish long 6 point...

he used to be active here and has not been around for some time. i have a question i would like to ask him. i sent him an email but i received no response. anyone have info on him?

just like it says. did any one else get the free nano ratchet, super u joint, extension and sockets? don't say were you got it, just post if you did and what you think.:thumbup:

i recently picked up some older pieces. maybe these will get a response from him. the flex is a blackhawk 49995 and the gillers are a cs 43 ratchet and a 62 spinner. :pimpflash

a thread on short handle flex rats was posted recently. at about the same time as i was thinking of my project, mike vango posted some pics of an sk tuff1 flex ratchet and a sure grip screwdriver handle. same ideas! he had a ratchet and the old school green with white strip handle that he used...

wanted, sk suregrip screwdriver handle. shank or blade need not be usable as it is for a project. they are the solid green square hard handle. they are also on pry bars and scrapers. i am also looking for a 3/8 tuff1 flex head ratchet, 72 tooth. it need not be working but must be repairable...

1. litton 3/8 ratchet, good condition 20.00 (sold to diesel dodge01) 2.easco 1/4 rhft, good condition 15.00 3. giller 1/4 sliding t, good condition 5.00 (2.50 if bought with the easco) 4. snap-on 17mm crow foot, like new 10.00(price lowered to 10.00 shipped) 5. snap-on double box 9/16-5/8...

for sale, cl122ks through cl2424ks wrench set. bought new and in good condition. used but not abused, no engravings or rust. 1/2 and 9/16 each have one very small arc spot on the open end. kit bag is from another set but they fit just fine. it has a very small hole (less than 1/8) on the back...

i stumbled on a 3/8 line wrench and it was given to me nearly 6 monthes ago. that gift started a search to complete a 3/8 - 3/4 set. i thought it would be easy and fun. well it was fun but not easy. i started watching searching and asking questions. my first headway came from a member here who...

i made a call to sk customer service today. i commented on page 7 post #138 on what i was told. love em or hate em, whether you like me or think i am a train wreck that is what i learned. i posted this way as i thought it would get lost in the shuffle. often times people do not look at long...

:)i am looking for proto pebble line wrenches 3716-1/2, 3722-11/16, and 3726-13/16. these are chrome and like the plomb version. i am also looking for bonney chrome polish wrenches in 7/8, 1 1/16 and 1 1/4. i have picked up the line wrenches for free and 2-5 dollars each, maybe more on the...

i saw some wrenches in a pawn shop today. they herbrand full polish wrenches 1 1/4, 1 1/8, 1 1/16, 1, 7/8 and 13/16 i think. they looked just like bonney wrenches. does anyone know if there is a connection? i can still get them for myself or someone else if they think there is a connection.

help!!!! i broke the input gear of the reverse gear on my atlas 10 f. the part number is a 9-48b if you have a parts list. clausing is big $ and ebay does not show any. does anyone know of any other sources.

i am looking for a low profile ratchet adapter. the type that will convert to the next larger size with an attached thumbwheel. a patent for armstrong exists ( patent # 5509333 ) but i have not found it in a catalog. does anyone know of a source for them. i think i have seen them in a three...

i aquired an older sk metric socket set missing a standard 3/8 x 13 mm 6 point. it is a very early style with 1 rings on the base and 1 above the size marking. it could be marked sk or sk-wayne. newer versions are taller and have 2 rings on the base and one above the size. i need the early...