Search results

I am using the small furniture dollys under each wheel of this project car with good results. When i get far enough to have the drivetrain in i dont think they would hold up. But for now while doing body and under side repairs they work well. I roll it to the middle when working and back to...

I added the casters and was still under 200 but harbor freight needs to figure them in. It is not going for a professional or heavy duty weld set up but for the home hobbyist like myself it works great

I dont know if the tooling will be available seperate. I saw this on a youtube video a few weeks back and had been asking about it. The manager didnt know anything till it showed up on the truck. They dont have a spot for it in the store yet. So if interested ask as they might be in the...

I picked up the new harbor freight welding and fab table. It is not out on dispay yet and is just rolling out to stores. My local store got 2 in and the manager said he would go ahead and sell me one (the other is the display). Seems well made. I run a level over mine and the top platform is...

I used one of the twelve-inch powered attic vents. but mounted on the wall up high and wired down to a switch to turn off and on

I have the 26 gallon kobalt quiet tech from lowes in my mower shed. It is super quiet compared to an oil less that i had. Its catch up rate isnt bad but filling from empty takes a long time. I only use it occasionally so it is great for that use. It doesn't bleed down unless i leave the...

I used an old pressure washer stand to make a dolly for my mower deck. Isnt pretty but works like a dream for thrown together from scrap. Roll the deck out and lay this over the factory hanger spots latch it and stand it up. Access to both side to clean the deck and change the blades and can...

try turning the thermostat all the way down, wait a minute then back up. I had one do that and the thermostat needed reset. may have to google your model to see if the reset is the same.

I worked at a small engine shop for a bit and the tree services would buy tru fuel to flush out their saws with at the end of jobs when they were going to be down for more than a day or so. Mixed fuel for working and canned fuel for storage. the guys said it made the saws last much longer

I painted a car in a metal shed that had condensation bad and used the same tarp idea to keep water from dripping on the car and direct it to the door area so it could run out. it was like it was raining in the building

I picked up a couple of carry around toolboxes of old hand tools along with a ridged pipe vise and mini vise( that i immediately sandblasted and repainted) for $5.00 Heres the vises, the little one is next to a 20oz soda bottle

thanks for everyones opinions. i may try to sell it one more time but if it doesn't sell then, I will cut it down to 2 8ft sections making an easily moved around small extension ladder (I already have a new fiberglass 24ft) and the other sections can be used as stationary ladders.

I may just have to throw it behind the shed and try selling it again in a few months. I've had it posted from 200 then down to 150 and all I keep getting are lowballs of 40-50 dollars. That is why I looked at other options for it, its in good shape other than some paint spilled on it. but Im...

I have a 32ft aluminum extension ladder. Taller than anything i would ever need (already have a new 24ft fiberglass ladder). Any issues with cutting it down to a 14-16ft extension ladder or if a kit to make a 10 or 12ft stepladder out of itis available

I don't know that model directly, but the cutoff switch usually has a screw adjustment in it that turns the pressure up and down for when the contacts break.

vice grip garage for the win

i did a test with some items plugged in and running and it was down to 118/119 so i bumped the governor up to 3680 and voltage went to 122. i feel more confident in this setting now that it has ran with a few items loading it. it took about a 1/8 of a turn to go from 3600 to 3680

Problem fixed i believe. I could not come up with a tester for hertz but i picked up a echo pet1000 small engine tach and i was running 3800 rpms. Dialed the governor screw back just a bit to 3600 and everything is good. I had 121/122v on the 110 outlets. I had 244v on the 220 outlet. I...

I downloaded that thank you

I couldnt find anything by the part number on amazon and Thats my next step is to take it back out and get it tested and find out if its on the high end of the +/-5 . Im happy that at least i know the generator works and isnt dead in the water