Search results

Hey Guys, I recently bought a Quincy Qr-25 series compressor. Model F350. It has a 10hp 1725rpm 3ph Baldor. In it's factory setup it produces 33.4 cfm@175psi. I don't have 3ph down at the shop. I know I could replace the motor with a 10hp 1725rpm 1ph. This quincy pump can be run from a 5-15hp...

I've looked everywhere, and I can't find a crimper to do 24ga heatshrink **** splices:headscrat Anyone have any leads? I can only find some some that go to 22....so maybe I just need to fold the wire over on itself and squeeze the hell out of it with my klein crimping pliers? Are there...

I have a lead on this compressor: http://www.northerntool.com/shop/tools/product_454_454 Specs are 25CFM@175psi rated at 100% continuous duty, 30gal. tank, 3/4" outlet. Iknow it only has a 30gal. tank, but I'm thinking the 100% continuous rating means it could still deliver 25cfm even if...

Anybody ever used one, or know someone that has? See them here: http://www.kooltools.com/kama_bandsaws.html click on the 996 model to see some pics of the claimed accuracy. also here: http://www.vansantent.com/Vendor_pages/Kama.htm Besides mild steel, and aluminum - I would also use it to...

Does anybody know if Kalpro tools closed up shop or something?:headscrat I've been to their website in the past: http://www.kalprotools.com But it's not there anymore. Anybody have any idea what happened? Were they another victim of our recession? Did they sell to China?

I recently bought a set of FDP wrenches, and two of them have chipping/peeling chrome on the open ends. By my thinking these should be replaced under warranty without question, right? Has anyone ever had this issue? How did SO handle it? Also the 14 mm is stamped backwards, meaning when the...

With the BOGO from SO, I'm looking to get the 1/4" set, as I already have this one. So, I'm trying to find someone to buy the 222AFSMP shown here: http://buy1.snapon.com/catalog/tools.asp?tool=hand&Group_ID=218&store=snapon-store New $538.75, I'd give it up for $320 shipped anyhwere in the US...

I am looking to get a kit to use to test engine oil pressure, preferebly something that comes in a nice blow molded case and includes : the pressure guage(0-100PSI) a decent length hose, and all the common thread adapters. If there are any kits suitable for both gas and diesel apps, that is...

I'm trying to test a oil pressure sensor on a 2002 Jeep grand cherokee 4.0 I6 and in the manual it says to insert the DRBIII scan tool in the sensor and measure the voltage. Next step to meausre resistance on the PCM side. I'm wondering if I can just do this with my digital multimeter, but just...

I want to buy a chop/cutoff saw. Does anyone have first hand experience with the Wilton F225 cold saw? Or any of the other lower end low RPM cold saws? How about the newer "dry cut" saws, like the Milwaukee 6190-20. I've read the blades on the Milwaukee dry cut saw aren't cheap, and prob the...

There is a Bluebird engine hoist for sale locally. It is listed as having an 8,000lb capacity lift cyclinder, and 3,000lb tongue/boom capacity. It can also fold and be towed on a 2" ball hitch. Has anyone ever seen/used on of these, and are they recommended? US made? How much do you think its...

Anybody know anything about the company Ramco? There is a used one listed in "like new" condition locally. Pics : Would you guys recommend this brand as a quality press - it appears to be US made in SC? How much would you think it's worth if it is in "like new" condition? Thanks GJ!

Has anyone ever used one of these? http://www.justritemfg.com/containes2.tpl?xtitle=Type%20II%20Cans%20For%20Flammables I am trying to decide between the Type II flammable container and the UNO style Type II container - in the 5 gal. size. I am sick and tired of going through plastic cans...

Can anyone recommend a quality trailer harness tester? The two I 've found are either from Snapon(Bluepoint): http://buy1.snapon.com/catalog/item.asp?P65=&tool=diagnostics&item_ID=76645&group_ID=21644&store=snapon-store&dir=catalog or Phillips...

I know the basics of what they are and do, but I am wondering in what kind of situations they really shine. Can they only be used in the upright position(standing up on a steel plate). Or can you stick them on the side of something like a backhoe arm drill into for example? Would the magnet hold...

Hey guys, I'm considering this box/combo here...

Amazon Deal - SK 6pt 47 Pc. 1/2"dr Socket Set $160 Here http://www.amazon.com/SK-4147-6-2-Inch-Standard-Metric/dp/B000FAPVQ8/ref=sr_1_40?ie=UTF8&s=hi&qid=1224022254&sr=1-40 Figuered if anybody needs a decent USA made 47 piece socket set with a nice case, this is a good enough deal that I just...

How do you guys think I did? It sells for $519 brand new. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=200253356622 I've been looking for that set for a while....and now I've got it - less than half price and brand new!:bounce:

I know somebody has one of the electronic wrenches from Snap-on or Gearwrench. Any comments on them? The good, the bad, and the ugly? Total gimmick or a quality tool? What are the advantages/disadvantages between traditional beam/dial/clicker and these electronic ones? Gearwrench is here...

Hey Guys, I was wondering if any of you have had any experience or if any of you knows anything about some of these older (but real nice looking) compressors. You know the saying "they don't make them like they used to". I'm considering one of the tow behind units to use around our farm, mainly...