Search results

Looking for a 1 HP 1725 RPM motor for a Delta MIlwaukee 14" Bandsaw. Prefer a motor that is pre-Rockwell International blue tag for period correctness but open to anything that is pre-triforce Delta. RI or capacitor start is okay. Also looking for a fence for the same 14" bandsaw (example below).

Picked this up at an antique mall out east while visiting a friend. I've never seen a spokeshave made of solid bronze this large. The only ones I've encountered and seen online that are made of bronze are tiny ones or "wireframe" 8" looking spokeshaves but never one in this style or this large...

3D printed from TPU (Thermoplastic Polyurethane) and dimensionally matched to fit any delta 24" scroll saw with 1" diameter holes for rubber feet that the clamps slide through. These ones have an extended base to help keep the scroll saw level on the stand. These feet were designed to be firm...

3D printed from TPU (Thermoplastic Polyurethane) and dimensionally matched to the original 50-353 foot pads for your vintage delta splayed leg stand. These pads were designed to be firm but with some light flex just like the originals. These pads will fit any open splayed leg stands that were...

This is the OEM for Matco's drain plug sockets ranging from 1/4" to 5/8". Perfect for the off size ones we encounter like the 5/8". Also these ones are competitively priced compared to any China/Taiwan versions. https://www.amazon.com/dp/B07HZ2XHWB/?tag=atomicindus08-20 They also make tools...

Original speckled paint. Was my own personal machine before upgrading and has been well taken care of over the years. Some minor patina on the fence adjustment that does not affect operation at all. Everything works excellently. Motor is an older GE motor and has been kept up on lubrication...

Sold

Looking for some clarification from those who know more about bearings than me. I'm restoring an old delta 6" jointer and the bearings are shot. I was looking for a cheaper option for high quality bearings and found some NOS New Departure bearings (exact same kind as stock). I found the 87503...

I'm thinking about getting a 3D printer to make a bunch of small pieces to hold collectible ratchets & other tools. There is very little said about whether PLA plastics break down in their lactic acid base and/or can corrode tools. Anyone have any experience with using 3D printed objects to...

SOLD Set is in excellent condition. A copy of the No 4237 SK Socket Set. Still has the tommy bar! http://alloy-artifacts.org/Photos/tools/sk_12dr_4237_socket_set_chrome_f_cropped.jpg Sizes range from 15/16" to 1/2", includes breaker bar and nice compact box. Should be enough room to include a...

I picked up this Hinsdale double box wrench. I'm having a hard time determining if this is cadmium coated because the finish doesnt look like all the other cadmium plated tools I own. This one has a powdery dull finish look to it like it was oxidized silver paint (other cadmium plated tools I...

Has anyone tried to polish/clean chrome tools that have some surface rust/dull finish using a vibratory tumbler? For those who did, how did it turn out? I was thinking of using 1mm ceramic balls to clean surface rust off of wrenches/sockets/pliers without having to be at a bench grinding...

All sold

Clearly Wera knows their customer base :)

I'm looking at doing a serious and long awaited upgrade to my Craftsman "Homeowner" 26" tool box thats been overflowing for years now. Currently comparing between the: Husky 61" Tool box...

I'm looking for a delta stand (the one with the club style feet) that was used on jointers and 8" tablesaws. The only dimension I care about is that the stand is approximately 30" tall (14" bandsaw stands are too short for my use at 24" tall). Let me know what you have and we can work out a...

Without being able to go much into detail besides "who knew the best and coolest engineering project for undergrads was reserved to those that have experience working with machinary, electrical, and HVAC :dunno:", I'm going to be working with a lot of industrial lego pieces that are all fastened...

Heres one for you all, I saw this at an antique mall a while ago and I can't, for the life of me, find any information on it or WHAT its purpose was. I think its some type of crimper but for crimping what I dont know. The mechanism has a spring in it and a wheel that slowly expands as you turn...

I picked up this 10" woodworking vise today at a yardsale for dirt cheap. Looks almost new and has the quick release. However, I also have this old Morgan 300A thats on my restoration list. Which one should I keep? On the one hand the chinese one has more features to it and is much larger, the...

Picked up this Aluminum Craftsman crowntop 3x21 sander, gets hot pretty fast so I took it apart. This thing got toasty, and looks like its about a 10 minute drive from giving up the ghost, definitely feels that way when only 1 minute of running makes it too hot to touch. Just look at that cooked...