Search results

This will fit most any 6" vise, not just Wilton. Caps are 6" x 1-3/4". New, Unused.Wilton marked. Number looks like 41-J327-25 $100 shipped in US.

I purchased this 12 years ago when Yost still had US production. They switched to imports in 2013, Excellent condition except for paint chips and metal patina. No dents, drill marks, dings. Just downsizing. This is a beast, weighs over 100lbs., The current imported versions sell for $700+...

Buddy told me I could have it if I could fix it, opened it up, piston looks new, but gun won't fire. Traced it down to the trigger is not hitting the plunger. When I remove the trigger assembly and manual push the plunger she fires just fine. Done the Google search for it but searching for...

I'm rebuilding and modifying a 2004 Sealion boat trailer that was, and will be, used in salt water. Seems many of the original bolts were only zinc plated and not hot dipped, they're badly rusted and I need to replace them. Is there a source for hot dipped Grade 5 bolts or am I...

My 15 year old Karcher just bit the dust. Or rather I put the last nail in the coffin. The motor was "seized" and while removing the shroud to spin it I must have nicked the hose. I got it to start up and then the hose blew out and it's not a quick connect. When I removed it to see if it could...

I hate throwing anything out but I never use this box anymore, not even sure where or when I got it. I know some of you are into restoration, if someone wants this box, it yours for the cost of shipping from 10590. Relatively good condition, clasp works and it closes well, just has surface rust...

http://www.tooltopia.com/ingersoll-rand-107xpa.aspx $77.00 shipped from Tooltopia, are these quality air ratchets? 54Ft/lbs torque. thanks, Rob

These pop up every so often, if I didn't have 4 sets already I'd be all over them. List is well over $100, only 3 sets available... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390836622016&ssPageName=ADME:B:SS:US:1123

Looks like the lowest price in over 3 years... http://www.amazon.com/dp/B001VXW7G0/?tag=atomicindus08-20

Most of my bearing work is on my boat trailers and small utility trailers. The boats trailers get dipped in salt water several times a year but my spindles are the kind with the Zerk on the end that channels new grease to the back and pushes old grease out the front so they get flushed when...

These have been around for a while but a great value as most other sources have them close to $100 or more. They can be cut to fit down to a 4" jaw. Seller is very good, I have purchased several sets, only wish she had some smaller ones...

End of year lawn tools, any recommendations for a good solid string trimmer? I've been using a Troy Bilt I got at Lowes about 4-5 years back and have had to rebuild the head twice and will now need a 3rd time. it's too underpowered for an aftermarket head (tried that already). Most of the...

After spending way too much time drilling out some rusted bolts from the underside of my Toyota I decided there has t be a better way. Seems I should have used a "spotting drill" first to start a centered hole on the bolt head. Recommendations for a set of spotting drill bits, commonly used...

I got one of those Lowe's 30Gal compressors about 2 years ago when they were selling for a stupid low price. I find that the manifold connection into the tanks, as well as some 3/8 pipe fittings I installed with Teflon tape don't pass the soap suds test, slowly losing pressure. I work with...

Found all this stuff in a crate of tools I inherited from a friend. Of the 11 pieces 9 are numbered similarly so they must comprise some type of set, the other 2 have no marks. everything blued steel except #8 which is brass and 2 & 11 are plated. Is this worth anything or scrap...

I picked up a box of 4 of these, really only will use two. They are New, Old Stock and come with a very well made mounting bracket (removable) that allow you to mount to the edge of a work table and remove when not in use. The box they came in has a Govt. Contract number so I assume they...

List $220 , $155 on Amazon http://www.sears.com/shc/s/p_10153_12605_00936588000P

Yost 204, Made in USA, 4" Mechanics Swivel Vise. List $557, Farmers Choice, $89.95

Any of the current offerings better than the others? Campbell Hausfield, Milton, Ampro, etc? Recommendations?

Anyone know where I can a 3/8" drive JIS -3 impact bit? Honda rotors are held to the hub with JIS screws and regular Philips #3 bits torque out and strip the head (found out the hard way...)