Search results

Just picked up this pair of Blue Point PWC52A pliers for free - but one of the soft jaws is missing, and Snap-on doesn't offer replacements. There are inserts available, but they are specifically for other brands, and I don't want to order some and have them not fit. Anybody deal with this...

Columbian 6" jaw vise, model # 606-M2. Main nut and lead screw are shot, swivel base is gone. Static and dynamic jaw castings are unbent and uncracked, though they have a lot of weld spatter on them and the slide was used as an anvil, apparently. Newly fabricated lead screw shim (stainless) and...

Recently, some of my coworkers broke the 1999 dated Wilton C1 at our place of employment. As the guy who deals with this kind of stuff, I disassembled the affected area of the vise and the pics attached show the carnage. I have spoken with Wilton (JPW) directly, and they have the # 2901110...

Recently picked up a rough Columbian 606 M2 needing a MAIN NUT & LEAD SCREW. Nut is malleable iron and has "506-4" cast in. Lead screw measures 1.125" diameter and the shank is 21.5" long (Acme threads I believe). PM me, thanks in advance.

Just picked up this Columbian 606-M2 for $40. Story is that the guy I got it from bought it from an old weld shop then figured out that it wouldn't tighten up. I've done some research that suggests the "M2" denotes a swivel base model (correct me if I'm wrong). Issues: (see pics) - Main Nut...

The space I rent in a red iron building has 20 year old Metal Halide fixtures and the one in my corner finally bit the dust. Instead of replacing the bulb with another MH unit and hoping the ballast is ok, I want to get an LED retrofit bulb (linked -...

I just recently picked up this .498" shank CP4447 rivet gun with a bunch of other solid rivet tools from a retired aircraft mechanic's lot. I am trying to source the proper retainer spring for it, as it didn't come with one, and the springs I got in the lot are too small (fit a .401" shank gun)...

Just got this old wood creeper with a wheel missing and one broken off carriage bolt pictured for reference. Does anybody know where to source them? McMaster-Carr doesn't have them, but they do have the exact wheel I need (although somewhat pricey). If anybody is parting out one of these...

Just got this old wood creeper with a wheel missing and one broken off carriage bolt pictured for reference. Does anybody have a pair of these fasteners or know where to source them? McMaster-Carr doesn't have them, but they do have the exact wheel I need (although somewhat pricey). If anybody...

A good friend of mine has two Bonney combo wrench sets and needs the following to complete them: MEB10L (10mm, long pattern, 12 point box end) 1114H (7/16", long pattern, 6 point box end) 1120H (5/8", long pattern, 6 point box end) Attached is pic with two of his wrenches for reference on...

I paid roughly $60 for this LOCK-017C tubular lockset and MLRA-005 adaptor. They did not work with my '89 MB1440 rollaway, so I'm offering them up here. The threads for the adaptor nut have partially stripped on one side, but the nyloc nut still tightens down ok. The adaptor will mate this...

See pics. I need ONE cheese head machine screw....oddball 11/32" diameter shank, 16 TPI, and 3/4" long under the head. This appears to be an obsolete or proprietary thread that I cannot locate anywhere. If you are scrapping one of these vises or know where I can locate this screw, any help would...

I'm going through a vintage Walworth (Boston USA) pipe fitters vise for my buddy. It's missing one of the fillister head screws that hold the jaw pads in. I thought it was a regular 5/16-18 thread, but noticed that my thread chaser was loose in the holes. I took measurements as follows: shank...

My recently acquired '89 MB1440 rollaway has a bad pin in the lock cylinder, and now it's blown apart. Key code is MAT 1. Does anybody have a functioning cylinder/key like this? Thanks in advance.

I was recently given an early 80s Sears ac welder for free. It needs a couple minor things (was told it worked good), but the style of plug on it is apparently not common anymore. My shop right now doesn't have a receptacle for it and it doesn't fit with the dryer receptacle in my apartment...

Looking for a clean KRL7015 in the standard Snap-on red finish. I'm located in the Lancaster, PA area....but will consider shipping on units farther away. Thanks in advance.

This pressure switch is on a Husky compressor in the garage I rent (doesn't belong to me). Model LF10-4H, works fine, but gasket/diaphragm leaks down below 80 psi overnight. Previously, I have tightened the four screws on the switch body, but now that will not correct the issue. Research has led...

I have a small lot of tools that my friend is getting rid of....some of which I am unfamiliar with. See pics and let me know what you think...

Matco SAE combination wrench set, 5/16" through 13/16". Professionally used and showing average wear, but still many good years left in them. Owners marks "Clark" on all of them. They are the long pattern WCL series. $75.00 shipped anywhere in the lower 48.

CAT 11 piece SAE combination wrench set 3/8" - 1, part # 4C-9600. They have the grooved open ends and 12 point box ends. Wrenches show light wear (see pics) but have NO OWNERS MARKS, chipping, flaking, gouging, corrosion, or other significant defects. Excellent tools that are very expensive from...