Search results

This is what I do too, here is a new bench that I recently built this way (part way through the build)…

I’ve just filled that cavity with grease from a grease gun and then whack an appropriately sized bolt or rod. I think that grease is probably a less compressible/more effective material to use than bread! But I guess if you need to get that pilot bushing out and only have your sandwich...

Built some badly needed shelves to get some stored parts and bins off of the floor. Changed the oil for the first time in my pickup... getting the factory oil filter off was a challenge. Not much room for a wrench and tight as hell. Sent from my iPad using Tapatalk

I took the expensive and risky path to eventually adopt this theory too. My septic outlet is about 6’ above the floor in my finished basement, so there is a sewage sump and pump for everything that originates down there. Failed pump means potential backup into finished space, so high-stakes...

Thanks very much! Totally agree on the bumpers. I never really liked the look of the US-mandated “park bench” bumpers on the later SL’s (1974-1989) so bided my time until an earlier 1972-1973 came up for sale with the smaller bumpers before buying mine. I found it interesting that many...

What did you do "IN" your garage today? Yeah, I really hate mice in the shop and the damage that they can cause. I don’t get too many anymore as I’ve sealed up the building pretty well over time, but don’t want to take the risk if they would happen to get in. The bubble is fully...

That’s a fair point. I suppose that a couple of moving blankets could be left on the car as an intermediate barrier “just in case” of a deflation. Besides the inherent physical protection of the bubble, I really love not having to worry about Mickey and Minnie taking up residence in my car...

Since Minnesota’s fall season was abruptly cut short by record early snowfall and now our roads are all full of salt, today my ‘73 Mercedes 450SL got an oil change, a wash, and went into her bubble for a long winters nap. Sent from my iPad using Tapatalk

I have the same lift. It works normally on most of my vehicles. For the small cars I have used hockey pucks on the main arms to pick up at the pinch weld lift points. Same devil on my shoulder, I guess, but its worked just fine. Sent from my iPad using Tapatalk

I have the Atlas 10X tall/wide and it has been rock solid for everything I’ve thrown at it, including my full size crew/long box (6.4’) Ram 1500, though not a 3500. Sent from my iPad using Tapatalk

Definitely a good idea. Might as well put an outlet for a welder in at the same time. Sent from my iPad using Tapatalk

It wasn’t terribly expensive to add the “eavelite”. The builder charged $3.77/LF for material and 0.02 labor hrs per LF. I put our 15kW solar system on the pole building instead of our home to avoid shade and re-roofing risks down the road. Most of the electricity generated actually supplies...

I went with polycarbonate at the top of the side walls (the building is not climate controlled). Wouldn’t be nearly as nice without all of that natural light. Sent from my iPad using Tapatalk

Important note to self: next time around, have the builder insulate the roof from the get-go. It’s amazing how much heat is radiated through a bare metal roof on a sunny day. Hopefully today’s project will cut down on that quite a bit. Sent from my iPad using Tapatalk

I’ve had insulators shorted to posts by bird droppings more than once. Can usually hear the arcing when you get close enough. Sent from my iPad using Tapatalk

Re: How to maintaing my water heaters- Gas and electric When you do end up replacing the electric water, consider looking for a “lifetime” style replacement. These are lined with poly so no water in contact with steel, no anode rod, no rusting out and leaking. Our home was built in 1993 with a...

I am 6’2” so had the same concern when I was shopping for my lift. I went with the Atlas OH-10X Extra Wide/Extra Tall. Love it. 10k lb capacity, room to open vehicle doors, and room to get under without major stooping. 14’ wall height in this building. Sent from my iPad using Tapatalk

Yes, that’s correct. Sent from my iPad using Tapatalk

I have a large sliding door plus an overhead door right at the corner of my 50’x120’ pole building. Takes up some space but the sliding door gives me straight access to the lift. Stamped design. Sent from my iPad using Tapatalk

Changed pads and rotors on my 112k mile 2014 Ram pickup. I’ve never had original pads and rotors last so long or look so good when I eventually replaced them. Still had 3mm on all of the pads, probably had another 10k miles of life in them. Well done Ram! Sent from my iPad using Tapatalk