To avoid these ads, REGISTER NOW!

110' x 26' Forclosure

To avoid these ads, REGISTER NOW!
OP
C

CreteCoater

Well-known member
Joined
Mar 4, 2010
Messages
542
Location
Central PA
quda8ady.jpg


Giving it the first real test run. The 2 ton of coal the previous owner left in the basement is burning nicely.

Now if the roof were finished.....

Sent from my DROID RAZR HD using Tapatalk
 

Mr. 360

Well-known member
Joined
Nov 23, 2012
Messages
662
Location
Bowmanville, Ontario
2 tons of free coal.. probably worth a good chunk of what you paid for the place ;). looks great, nothin beats a heated shop when it's cold out
 

McDowell

Member
Joined
Sep 15, 2009
Messages
19
Location
Central PA
Nice build, not sure how I haven't run across it until today. I live about 25 min from Osceola in Lanse. I think I remember seeing the ads in the newspaper when the bank was advertising for bids on this. Looking great so far.
 
OP
C

CreteCoater

Well-known member
Joined
Mar 4, 2010
Messages
542
Location
Central PA
Thanks McDowell. I'm surprised nobody bought it before me as long as it sat.


Sent from my DROID RAZR HD using Tapatalk
 

smokem2020

Well-known member
Joined
Jul 21, 2011
Messages
92
Location
Rossville In
I like this thread, We also have a former Ford dealership. Its located in Mulberry Indiana. we have pictures of it with some Model Ts and some Model As out front. Since then it has been a cheese factory and a warehouse for fire hydrants. We use it as a hobby garage and storage. Our building needs lots of work too. We have 3phase power that is nice. But no water or sewer right now. I would post a picture but not real sure how. I might be able to send it via my phone buts that about it.
 

CNGsaves

Well-known member
Joined
Sep 26, 2012
Messages
13,233
Location
KS and OK
I like this thread, We also have a former Ford dealership. Its located in Mulberry Indiana. we have pictures of it with some Model Ts and some Model As out front. Since then it has been a cheese factory and a warehouse for fire hydrants. We use it as a hobby garage and storage. Our building needs lots of work too. We have 3phase power that is nice. But no water or sewer right now. I would post a picture but not real sure how. I might be able to send it via my phone buts that about it.

Take a pic with your cell phone, but change the "Send To" address from being a phone number, to instead be your own E-Mail address. Then save the pic to your computer's harddrive while reading the email with computer.

On GJ, use Manage Attachments and you can browse your computer harddrive for the pic and click Upload, then Save.

Go for it . . . learning to use your cell phone to get pics on your computer is CRITICAL if you ever have car wreck that is other guy's fault and you've got to document what happened. Need to get pics off of cell phone anyway as it could be lost or destroyed at any time. Having pics on your home computer is much safer and permanent.
 
OP
C

CreteCoater

Well-known member
Joined
Mar 4, 2010
Messages
542
Location
Central PA
There are about a half dozen places within a 10 mile radius. Priced it today anywhere from $90 - $150 a ton.

There are probably 10 active strip mines within the same radius.

Sent from my DROID RAZR HD using Tapatalk
 
OP
C

CreteCoater

Well-known member
Joined
Mar 4, 2010
Messages
542
Location
Central PA
Speaking of coal.......we just wrapped up building a coal bin upstairs to keep from running to the basement as much.

dy9yjyza.jpg


ahugybyq.jpg


aduvu5yq.jpg


Sent from my DROID RAZR HD using Tapatalk
 
OP
C

CreteCoater

Well-known member
Joined
Mar 4, 2010
Messages
542
Location
Central PA
uvupygym.jpg


Found this old metal sign when we were busting up some old workbenches. It was being used as a drawer bottom. Now at home on the coal bin.

Sent from my DROID RAZR HD using Tapatalk
 
To avoid these ads, REGISTER NOW!
OP
C

CreteCoater

Well-known member
Joined
Mar 4, 2010
Messages
542
Location
Central PA
Thanks 360. I build it out of the old ceiling joists I salvaged. I wanted it to look like its been here a while. I'm looking for some old coal advertising to hang on it. I did pick up a reading coal thermometer on eBay.

Sent from my DROID RAZR HD using Tapatalk
 
OP
C

CreteCoater

Well-known member
Joined
Mar 4, 2010
Messages
542
Location
Central PA
Maybe it looks bigger than it really is but are you going to have trouble reaching into the back corners of that bin ?

Its an optical illusion. The bin is about 3' high, 3' deep and 7' wide. With the notch in the front you can easily reach both back corners with a coal shovel. I think it will hold just shy of a ton and a half.

Sent from my DROID RAZR HD using Tapatalk
 

jopickens

Well-known member
Joined
May 29, 2009
Messages
176
Location
Grafton, WV
What am I missing in your latest truss pictures? (11-15-2013, 03:45 PM) I don't have the eyesight I used to, but I can't see how they are braced/standing there so well? :)
Josh
 

155'Ringman

Well-known member
Joined
Dec 10, 2012
Messages
103
Location
N.Ireland
This is great. Good to see a nice old building get saved and jealous as hell at the price you got it for..:wtf:

Good luck in getting it closed up before the worst of the weather arrives. :thumbup:
 
OP
C

CreteCoater

Well-known member
Joined
Mar 4, 2010
Messages
542
Location
Central PA
Is the new coal bin on the center(front) level or the upper floor? If it is on the top floor who gets to move the coal upstairs? I suppose it can be delivered to the main floor via truck .

The building is basically 3 levels. The full length basement with a garage door out back, the full length main floor with a garage door in front, and an upstairs office area that is only about 30` deep accessed by the stairwell on the main floor. The new bin is on the main floor and a pickup truck can back right up to it. There is a stairwell down to the old coal in the basement that we have been bringing up in buckets.

Just finished reading all the pages. My family is the McCullys that run/ran the Buick Garage/Dealer in town (Ramey).

Great build!

Thanks. I have always loved that Buick garage since I was a kid riding passed it on the way to Bungos with my dad. I have a 71 Skylark that I had since 15. Once the roof is on I would love to get it on the road again!

What am I missing in your latest truss pictures? (11-15-2013, 03:45 PM) I don't have the eyesight I used to, but I can't see how they are braced/standing there so well? :)
Josh

There was no wind that day so we actually just screwed them in place and they stood by themselves. We then went back and plumbed them as we ran purlins and bracing to secure them followed by the hurricane straps. The trusses are only 44" tall so not very top heavy.


Thanks for the kind words everybody, glad your enjoying the thread!
 

OHSCrifle

Well-known member
Joined
Mar 11, 2013
Messages
178
Location
Atlanta
When trusses start to fall like dominos it gets really loud, and really dangerous. Glad it worked out ok for you.
 

NUTTSGT

Super Moderator
Staff member
Joined
Sep 14, 2009
Messages
50,849
Location
Northern Central Ohio
Its an optical illusion. The bin is about 3' high, 3' deep and 7' wide. With the notch in the front you can easily reach both back corners with a coal shovel. I think it will hold just shy of a ton and a half.

Sent from my DROID RAZR HD using Tapatalk

That doesn't sound bad size wise till you start carrying those buckets up to fill it out of the basement. :D

The neighbor burns coal and he showed me one of his tricks for pitching a quick load into the fire. He uses the plastic grocery bags, put a scoop in it and tie it shut. Open the door and pitch it right where you want it.
 

Kevin54

MEMBER EMERITUS
Joined
Jan 12, 2005
Messages
29,341
Location
Urbana, Ohio
Coal is dirty, but boy does it pump out the heat ! Any place local to buy it ?

If you burn coal, you had better have the right stove to burn it. One Christmas it was -24f. My truck was the only thing around that was running, so I headed around the block to my parents to see how they were fairing. Dad had just gotten some coal earlier in the week and gave me a few huge chunks to take home. Yep, I got coal for Christmas :lol: I wasn't thinking and I tossed one into the woodburner. IIRC, it was a Black Bart airtight. Big mistake!!!! The house got really warm, the clinkers that were left were still burning through the night up into the next morning. And later inspection showed I cracked the back out of the stove from the heat.

I was young and dumb and that was my first airtight stove.
 
To avoid these ads, REGISTER NOW!
Top Bottom