12' tall wall height garages?

[weatherby460]

Can I please see some pictures of 12' wall height garages. I am building one and need some inspiration. Thanks

 

[pattenp]

Mine is actually 12' 6"

View media item 15249
View media item 15216

 

[crooklyn]

Here is a linke to my work in progress. The walls are 13ft
http://www.garagejournal.com/forum/showthread.php?t=292256

 

[crooklyn]

Mine is actually 12' 6"

Pattenp I love the lift and hieght looks great! my dream buddy!

 

[black00lightning]

Here's my 13'6" ceiling. Recently converted to high lift with a LiftMaster 8500 opener. Not sure why they're flipped.

 

[black00lightning]

Here's my 13'6" ceiling. Recently converted to high lift with a Lift Master 8500 opener.

 

[38Chevy454]

See link in my signature, mine has 12 ft height.

 

[s_ontario]

here's mine 12' sidewalls 6/12 roof truss
http://www.garagejournal.com/forum/attachment.php?attachmentid=446440&stc=1&d=1432735847

 

[workhurts]

13' to 12' 9" ... or maybe it was 12' 9" to 12' 6" ... can't remember. Anyway, it's sloped about 3" from front to back.

http://www.garagejournal.com/forum/showthread.php?t=203925

 

[dirttracker18]

12' 8" when I was just finishing it.

12' stick built walls on 8" blocks plus cathedral ceiling to maximize space

 

[GYPSY400]

Mine is 11ft at the doors, 13ft at the middle.. Doors are 10x10 with lift master 8500 jack shaft openers.






Sent from my iPhone using Tapatalk

 

[Rod N]

If you plan on a lift go a few more inches than 12'.

 

[weatherby460]

I am looking at doing a 12' walls with a 18' x 9' door...wasn't sure if the door will look to big...I will try to post a picture................

 

[YukonXL04]

I'm doing a 20x10 door with 12'6" walls

 

[PECVD2]

12' ceiling height, 16'x10' garage door.

 

[akdiesel]

My shop is 12'6" ceilings and two 10' tall x 12' wide doors. . I have a four post lift that can lift a 2002 2500hd 4x4 all the way with 285 / 75 / 16 tires and no suspension lift. It still clears the ceiling by approx 6"

[/URL][/IMG]

 

[DonB]

Inside my 32x40 gambrel roof barn. Two course block wall, 10ft lumber above that. Not quite 12 feet but good enough for me. Started working out of it before it was done.
Don

 

[sbosecker]

If you plan on a lift go a few more inches than 12'.

^^^^^^
This if you can spare a few more inches! An awful lot of 2-post lifts need right around 12 feet.

Best regards,

Scott

 

[jlckmj]

Mine is about 13 foot 6 inch in the center, with 10 foot walls.
That way it does not look overbearing on the outside, (municipal rules) but yet I have a 10,000 Rotary lift in there. Look at the pics, the light bulbs are at about 12 foot 4 inches.

 

[SILVERPLATE]

Exactly 12 feet.