2017 Epstein's Day?

[priceman1414]

Any updates on whether those SK dual pawl refit kits for old round heads will be available by Epstein's day?

thanks

 

[jsackin]

So here's the official post for Epstein's Day with all the rules/promotions. Hopefully the moderator will put it at the beginning of the thread so everyone is sure to see it.

Rules:

(1) Place your order on July 4th (Tuesday). We go by central time here. We are extending the deadline to get your order in by Friday of that week. (Note: Promotional items are limited, so if you really want a t-shirt, it pays to stay up late and get your order in early.)

(2) In the comments section let us know it's an Epstein's Day order by writing, "Epstein's Day!" or something like that. If you pay with PayPal, you'll have to send us an email ([email protected]) as those orders don't allow for a comment to be attached. Also, if you qualify, be sure to include your shirt size.

Promotions:

- Wright Tool -

All Wright sets will be 5% off. If you buy $75 worth of Wright stuff we're gonna throw in their 2 in 1 screwdriver (#9181)

- SK Tool -

All SK sets will be 5% off. If you buy $100 worth of SK stuff you'll get the specially designed Epstein's Day T-shirt. (We're still working on the design, so I'll post a photo of it when it's available.)

- Norseman -

We're going to offer their new cryogenic drill bit set for $99.95. This is a terrific deal as we've been selling them really well at $140.00 for the last couple months.

We're also offering their 4 pc Step Drill Bit Set for $99.95 as well. Normally sell it for $136.00.

HJE

For orders over $75 we're going to throw in a #90198 USA Barclay bar.

We also reserve the right to throw in some strange and unusual item for anyone that participates.

And like always, thank you guys for making this happen. It's a really big deal for us to have this kind of support from a community like this. Hope everyone has a great Epstein's Day, and also a happy 4th.

 

[jsackin]

Any updates on whether those SK dual pawl refit kits for old round heads will be available by Epstein's day?

thanks

No word on a timeline for any of the other new ratchet items from SK. If I hear anything, you guys will be the first to know.

 

[neonlazer]

If only I had the need for more tools.

Would go for the new cryogenic drills but not sure if i get the benefits over the normal HSS magnums I have.

 

[NoahG]

What if we want a shirt but don't have $100 in SK items?


Sent from my iPhone using Tapatalk

 

[d.mcfarland]

I honestly wish it were more enticing to participate.

 

[jakemac]

Just like previous events, this isn't about deals or freebies. HJE has been generous in its efforts to get special pricing from their suppliers and surprise gifts, but the goal of this event is for us to support them, as well as to offer support to brands that still manufacture in the US. That's why July 4th is the chosen date (give or take a few days for stragglers).

U.S.A. tools on U.S.A.'s birthday.
(although, you are certainly free to add items from any manufacturer to your order)

'Nuff Said.
(I'll step off my soapbox for now, but reserve the right to drag it out of the woodshed again if needed)


Thank you, Jori and the team at HJE, for making this happen for another year.

 

[dkroth]

What if we want a shirt but don't have $100 in SK items?

The shirts are $100.

Please ask Jori to ship your free S-K items to me.

 

[buba]

I think you should have a super sized image of the new SK ratchet on the back of the t-shirt

 

[72highboy]

My cart is ready [emoji4] ...I think this has been mentioned before, but what are some cool small item must haves? IE 6 in 1 hje driver

Also, being new to sk, what are some good things to try out besides the new ratchet? I have plenty of sockets...
Sent from my Nexus 6P using Tapatalk

 

[jsackin]

I think you should have a super sized image of the new SK ratchet on the back of the t-shirt

This was my thought as well. Gave the designers images of the ratchet, so we'll see what they come up with.

 

[StillTooManyHobbies]

I'm in for a couple of these
https://www.harryepstein.com/index.php/cordura-tool-roll.html

and these for the smalls...
https://www.harryepstein.com/index....proof-security-screwdriver-bit-block-set.html

 

[jakemac]

Also, being new to sk, what are some good things to try out besides the new ratchet? I have plenty of sockets...
Sent from my Nexus 6P using Tapatalk

I've found the thumbwheel ratchets to be helpful when working on small engines. Once the nut/bolt is loose, they make backing off easy. The action on them is smooth as well.

Pry-bars are always handy.

 

[buba]

If you do not already have a 3/8 drive ratchet in a 1/4 body consider the SK 45173. It has come in handy in tight locations as has the thumb wheel ratchet Jake referenced. I also have the Wright 3/8 drive compact flex head ratchet (3440) which also has been used more often than I thought it would.

 

[anndel]

Though 2-1/2 weeks away I just put stuff in my cart ready to pull the trigger on 0001 July 4th.

 

[48548]

Hmmmm...

 

[48548]

I noticed the dual 80s you can hold the selector... on the sk it will free wheel as you ratchet... not a big deal but not good either, dual 80 does nothing so you can hold the selector hard left or right as you ratchet...

 

[tjpavlov]

Magnolia brushes are a great add on item.

 

[priceman1414]

Seriously considering getting the SK long pattern metric wrench set this year. Hope this is one of the sets that gets the 5% discount.

https://www.harryepstein.com/index.php/wrenches-combo-metric-full-polish-29189.html

 

[Fedwrench]

I like the green selector switch

 

[MaineGuide]

Looks like I'm in for both of the Norseman deals! Probably some SK too...

 

[Jawn]

I was thinking of a step drill set, but not that familiar with them... what's the difference in the multiple bits in the 4pc set?

 

[jake00]

I was thinking of a step drill set, but not that familiar with them... what's the difference in the multiple bits in the 4pc set?

Different sizes

 

[Jawn]

Different sizes

Seems like an awful lot of overlap though.

 

[Ohmthis]

You had me at 5% off of wright sets I had already picked my set out before even seeing this. Thanks all

https://www.harryepstein.com/index.php/15-piece-12-point-metric-combination-wrench-set-7mm-22mm.html

 

[brveagle]

Had the privilege to walk down over my lunch to grab one of the new SK ratchets. Always a pleasure to visit this store. So much inventory.

Just wish my wallet was a bit thicker to accommodate all my "wants".

 

[1982fxr]

Hmmmm...

What's up with that snap on not having a formed handle?

 

[LB-1911]

What's up with that snap on not having a formed handle?

Previous thread w/ additional photos

Hot off the truck: SO RAF80 thin profile ratchet (and MAC extra-short sockets)http://www.garagejournal.com/forum/showthread.php?t=33382
04-03-2009

 

[48548]

Correct extra low profile ratchet....

 

[1982fxr]

Does hje order Wright apparel same as tools?

Just supply a part number?

 

[NoahG]

Does hje order Wright apparel same as tools?



Just supply a part number?

If it's in their catalogue then I think that works.


Sent from my iPhone using Tapatalk

 

[buba]

Any one else having issues logging in to HJE today. Been getting the following error message when trying to log in or use the contact form from their site.

"There was an error with the recaptcha code, please try again."

 

[LB-1911]

Any one else having issues logging in to HJE today. Been getting the following error message when trying to log in or use the contact form from their site.

"There was an error with the recaptcha code, please try again."

Just attempted - Same -

There was an error with the recaptcha code, please try again.

 

[jakemac]

Same here.

 

[jsackin]

Any one else having issues logging in to HJE today. Been getting the following error message when trying to log in or use the contact form from their site.

"There was an error with the recaptcha code, please try again."

Working on it. We had lots of spam coming in from a Chinese website so we had to put up a captcha to stop all the fraudulent requests. Hopefully we'll get it fixed today.

 

[anndel]

Any one else having issues logging in to HJE today. Been getting the following error message when trying to log in or use the contact form from their site.

"There was an error with the recaptcha code, please try again."

Same here

 

[LB-1911]

Working on it.

We had lots of spam coming in from a Chinese website so we had to put up a captcha to stop all the fraudulent requests.

Hopefully we'll get it fixed today.

Good Luck

 

[48548]

I am more disappointed everything I want to order from sk is special order.....

 

[jakemac]

I am more disappointed everything I want to order from sk is special order.....

Not to worry, just means a slight delay (dependent on SK's inventory) in shipping the order. BTDT.

It will be the same thing for any special orders from Wright.

 

[48548]

Not to worry, just means a slight delay (dependent on SK's inventory) in shipping the order. BTDT.

It will be the same thing for any special orders from Wright.

It was sk long reach pliers and indexing pry bars and plastic rivet tool....