a52-830
Well-known member
Re: 2018 Home Depot Clearance Thead
i like how it lists this as an "m18 special buy"
i like how it lists this as an "m18 special buy"
2018 Home Depot Clearance Thread
- Thread starter chadman117
- Start date
Diesel Dan
Well-known member
ToolGuyTy
Member
Re: 2018 Home Depot Clearance Thead
My store had it and wouldn’t match it as he tag they had on it was so old it wouldn’t even ring up.
Sent from my iPhone using Tapatalk Pro
My store had it and wouldn’t match it as he tag they had on it was so old it wouldn’t even ring up.
Sent from my iPhone using Tapatalk Pro
bigcountry978
Well-known member
Re: 2018 Home Depot Clearance Thead
I know it's not a tool box or miter saw but they make good Christmas presents lol
Sent from my SM-G950U using Tapatalk
I know it's not a tool box or miter saw but they make good Christmas presents lol
Sent from my SM-G950U using Tapatalk
tadwolfe
Well-known member
Re: 2018 Home Depot Clearance Thead
Nice [emoji106][emoji109]
Sent from my iPhone using Tapatalk
Nice [emoji106][emoji109]
Sent from my iPhone using Tapatalk
Mctiger1985
Well-known member
Re: 2018 Home Depot Clearance Thead
Please provide the SKU if you are going to boast about the deals you get.
Please provide the SKU if you are going to boast about the deals you get.
a52-830
Well-known member
Re: 2018 Home Depot Clearance Thead
remember my post about the guy who came at opening and cleared out the 125.03$ one key kits before they even knew they were being marked down?
https://www.garagejournal.com/forum/showpost.php?p=7234901&postcount=1531
while i am not sure, i bet these are what happened to them:
Brand New Milwaukee Impact Driver w/ One Key - $95 (Saugus)
https://boston.craigslist.org/nos/tls/d/brand-new-milwaukee-impact/6610142084.html
Brand new Milwaukee Hammer Drill w/ One Key - $145
https://boston.craigslist.org/nos/tls/d/brand-new-milwaukee-hammer/6610111677.html
Brand New Milwaukee 5.0 Battery - $75 (Saugus)
https://boston.craigslist.org/nos/tls/d/brand-new-milwaukee-50-battery/6610094112.html
315$. not bad for a 125$ (and some amount of time) investment.
didnt notice the chargers. if they are smart, they'll offer them to the people picking up for an additional 15$ or 20$.
[edit] oops, here it is:
Brand new Milwaukee 18V/12V Charger - $50 (Saugus)
https://boston.craigslist.org/nos/tls/d/brand-new-milwaukee-18v-12v/6610146554.html
ouch! the old style charger for 50$? good luck with that.
remember my post about the guy who came at opening and cleared out the 125.03$ one key kits before they even knew they were being marked down?
https://www.garagejournal.com/forum/showpost.php?p=7234901&postcount=1531
while i am not sure, i bet these are what happened to them:
Brand New Milwaukee Impact Driver w/ One Key - $95 (Saugus)
https://boston.craigslist.org/nos/tls/d/brand-new-milwaukee-impact/6610142084.html
Brand new Milwaukee Hammer Drill w/ One Key - $145
https://boston.craigslist.org/nos/tls/d/brand-new-milwaukee-hammer/6610111677.html
Brand New Milwaukee 5.0 Battery - $75 (Saugus)
https://boston.craigslist.org/nos/tls/d/brand-new-milwaukee-50-battery/6610094112.html
315$. not bad for a 125$ (and some amount of time) investment.
didnt notice the chargers. if they are smart, they'll offer them to the people picking up for an additional 15$ or 20$.
[edit] oops, here it is:
Brand new Milwaukee 18V/12V Charger - $50 (Saugus)
https://boston.craigslist.org/nos/tls/d/brand-new-milwaukee-18v-12v/6610146554.html
ouch! the old style charger for 50$? good luck with that.
Last edited:
EOC_Jason
Well-known member
Re: 2018 Home Depot Clearance Thead
They were on a previous page I'm 99% sure...
Please provide the SKU if you are going to boast about the deals you get.
They were on a previous page I'm 99% sure...
Re: 2018 Home Depot Clearance Thead
Someone posted a pic along with the sku from the pca a couple days ago
Please provide the SKU if you are going to boast about the deals you get.
Someone posted a pic along with the sku from the pca a couple days ago
Re: 2018 Home Depot Clearance Thead
Good luck getting that. Prices have plummeted. You may get a little more parting it out but. Going rate is about $260 for the complete kit.
Good luck getting that. Prices have plummeted. You may get a little more parting it out but. Going rate is about $260 for the complete kit.
drwheels
Well-known member
Re: 2018 Home Depot Clearance Thead
That’s actually pretty smart to part it out. I might give it a shot with the combos I have. I’ve sold 3 sold far for a little under that average.
That’s actually pretty smart to part it out. I might give it a shot with the combos I have. I’ve sold 3 sold far for a little under that average.
Mctiger1985
Well-known member
Re: 2018 Home Depot Clearance Thead
Ok, then why did you post it again? We don't need to see pictures of everyone's haul.
Re: 2018 Home Depot Clearance Thead
People on here and people on slickdeals do this all day long. ***** for people like me who want the tools to use them. There was a guy here clearing out toolboxes last year with a trailer full.
People on here and people on slickdeals do this all day long. ***** for people like me who want the tools to use them. There was a guy here clearing out toolboxes last year with a trailer full.
rpearlberg
Well-known member
Re: 2018 Home Depot Clearance Thead
I remember that!!! That being said, if anyone in CT has an extra chainsaw, I'd buy one from you!
Or the PumpSpy backup also.
Thanks!!
I remember that!!! That being said, if anyone in CT has an extra chainsaw, I'd buy one from you!
Or the PumpSpy backup also.
Thanks!!
Cruzan80
Well-known member
Re: 2018 Home Depot Clearance Thead
For people who can't look back two days...
My four were still in original shipping cardboard, with only the sku to identify them. About half the PCAs in Denver didn't register them (not sold in those stores)?
Sent from my Moto G (5) Plus using Tapatalk
Can we stop with the back and forth over battery/gas? Or at least post deals when you comment.
Poulan Pro 20" Chainsaw down to 50.03 at some stores. Not showing in all store's PCA.
Sent from my Moto G (5) Plus using Tapatalk
For people who can't look back two days...
My four were still in original shipping cardboard, with only the sku to identify them. About half the PCAs in Denver didn't register them (not sold in those stores)?
Sent from my Moto G (5) Plus using Tapatalk
schmelpboy
Banned
- Joined
- Jun 24, 2012
- Messages
- 1,717
Re: 2018 Home Depot Clearance Thead
Those tool boxes are still out there. I'm still grabbing them left and right in the Chicago area.
Sent from my SM-G955U using Tapatalk
Those tool boxes are still out there. I'm still grabbing them left and right in the Chicago area.
Sent from my SM-G955U using Tapatalk
Re: 2018 Home Depot Clearance Thead
Why not?! It pumps me up to go find deals!! I love it!!
schmelpboy
Banned
- Joined
- Jun 24, 2012
- Messages
- 1,717
Re: 2018 Home Depot Clearance Thead
Sent from my SM-G955U using Tapatalk
Same here. I saw the chainsaws and went to hd over lunch. No saws, but I got 5 Milwaukee kits for 125 that someone else would've found if not for being posted on gj.
Sent from my SM-G955U using Tapatalk
TreeheadWoodfist
Member
- Joined
- Feb 23, 2018
- Messages
- 8
Re: 2018 Home Depot Clearance Thead
Where in the Chicago area, may I ask? I'm in the western suburbs and haven't found any. I went to the Cicero location the other night to look for the Milwaukee Drill/Driver combo and they showed a $50 Husky 36" rolling tool chest in stock. I walked around with an employee and he even went up in the stock picker a few places, but we never found it.
Where in the Chicago area, may I ask? I'm in the western suburbs and haven't found any. I went to the Cicero location the other night to look for the Milwaukee Drill/Driver combo and they showed a $50 Husky 36" rolling tool chest in stock. I walked around with an employee and he even went up in the stock picker a few places, but we never found it.
Re: 2018 Home Depot Clearance Thead
Normally when it says 1 in stock that essentially means Zero
Normally when it says 1 in stock that essentially means Zero
ToolGuyTy
Member
Re: 2018 Home Depot Clearance Thead
Dude please sell me one.
Sent from my iPhone using Tapatalk Pro
Dude please sell me one.
Sent from my iPhone using Tapatalk Pro
jwal
Well-known member
Re: 2018 Home Depot Clearance Thead
What Milwaukee kit is that? I might be interested as well. I don't have time during the day to run out and search for these deals.
What Milwaukee kit is that? I might be interested as well. I don't have time during the day to run out and search for these deals.
schmelpboy
Banned
- Joined
- Jun 24, 2012
- Messages
- 1,717
Re: 2018 Home Depot Clearance Thead
It's the kit that's been posted a bunch of times in the last few pages. If you want one, PM me.
Sent from my SM-G955U using Tapatalk
It's the kit that's been posted a bunch of times in the last few pages. If you want one, PM me.
Sent from my SM-G955U using Tapatalk
schmelpboy
Banned
- Joined
- Jun 24, 2012
- Messages
- 1,717
Re: 2018 Home Depot Clearance Thead
Sent from my SM-G955U using Tapatalk
Hey. **** out!
Sent from my SM-G955U using Tapatalk
Oilspill14
Member
- Joined
- Aug 24, 2017
- Messages
- 14
Re: 2018 Home Depot Clearance Thead
Some stores have this for 68.03; 1002707449
Some stores have this for 68.03; 1002707449
Oilspill14
Member
- Joined
- Aug 24, 2017
- Messages
- 14
Re: 2018 Home Depot Clearance Thead
Last checked, 50.03, might be penny now 1002249295
Last checked, 50.03, might be penny now 1002249295
Bzrollin
Well-known member
Re: 2018 Home Depot Clearance Thead
Electrical tape pennied. Left a few rolls back there. Thought the bit set was worth it.
Electrical tape pennied. Left a few rolls back there. Thought the bit set was worth it.
Jarcese
Well-known member
Re: 2018 Home Depot Clearance Thead
Found one of the Milwaukee drill/driver kits at Plymouth, MA store for myself on top shelf. Went to Rockland, MA who had 4 in stock full price and could not find them. I assume someone hid them waiting for clearance mark down. They may still be there somewhere if someone is more interested than I am in finding them.
Shlage door hardware on final markdown in Plymouth in one of the clearance bays. I bought most of the satin nickel. There is a lot of stainless left. I'll post skus, prices, and models when I get home.
Sent from my SM-G930P using Tapatalk
Found one of the Milwaukee drill/driver kits at Plymouth, MA store for myself on top shelf. Went to Rockland, MA who had 4 in stock full price and could not find them. I assume someone hid them waiting for clearance mark down. They may still be there somewhere if someone is more interested than I am in finding them.
Shlage door hardware on final markdown in Plymouth in one of the clearance bays. I bought most of the satin nickel. There is a lot of stainless left. I'll post skus, prices, and models when I get home.
Sent from my SM-G930P using Tapatalk
jwal
Well-known member
Re: 2018 Home Depot Clearance Thead
I'm ready for the insults, but is there any way at all to check on clearance items online? I know you can with Lowes. I presume there isn't, but it would be dumb not to ask.
Thanks
I'm ready for the insults, but is there any way at all to check on clearance items online? I know you can with Lowes. I presume there isn't, but it would be dumb not to ask.
Thanks
jits1980
Well-known member
Re: 2018 Home Depot Clearance Thead
No you have to check PCA on computer to see clearance pricing. Not as easy as Lowe’s inventory.
Sent from my iPhone using Tapatalk
No you have to check PCA on computer to see clearance pricing. Not as easy as Lowe’s inventory.
Sent from my iPhone using Tapatalk
Re: 2018 Home Depot Clearance Thead
Was he kidding? If not, I know that naps always help my little niece when she is cranky.
Sent from my iPhone using Tapatalk
Was he kidding? If not, I know that naps always help my little niece when she is cranky.
Sent from my iPhone using Tapatalk
jwal
Well-known member
Re: 2018 Home Depot Clearance Thead
Bummer, I appreciate your response though, and thanks for going easy on me haha. Last couple of times I tried to use that system, an associate ran me off. I guess they don't want anyone other than "pros" over there, and I don't feel like I can make a pro account seeing as I don't own a business.
Bummer, I appreciate your response though, and thanks for going easy on me haha. Last couple of times I tried to use that system, an associate ran me off. I guess they don't want anyone other than "pros" over there, and I don't feel like I can make a pro account seeing as I don't own a business.
Re: 2018 Home Depot Clearance Thead
You should take that advice, cause you seem to be one of the people on here who get mad about people buying more than one of something
You should take that advice, cause you seem to be one of the people on here who get mad about people buying more than one of something
Last edited:
Re: 2018 Home Depot Clearance Thead
oh so you cleared out all my tape?
luckily I have all that black duct tape that pennied last year
Electrical tape pennied. Left a few rolls back there. Thought the bit set was worth it.
oh so you cleared out all my tape?
luckily I have all that black duct tape that pennied last year