2018 Home Depot Clearance Thread

[12three]

what ridgid 18v .03/75% deals have you picked up in the past 5 years?
x4 grinder? very limited stores 5 yrs ago
x4 impact wrench? very limited stores 5 yrs ago
x4 circle saw? very limited stores 2 yrs ago
vacuum? thats a good one, but that was 2017 and only in limited stores
orbital sander? 2017 and semi limited stores.
air comp
16ga straight finish nailer

those are your .03/75% ridgid deals over a five year span.
that cannot compare to milwaukee dewalt or even makita's 2018 deals alone

 

[Ole Slewfoot]

I got a ridgid 5.0 battery with charger for $36ish awhile back. not sure if it was exactly 75%

 

[fourjeepin]

what ridgid 18v .03/75% deals have you picked up in the past 5 years?
x4 grinder? very limited stores 5 yrs ago
x4 impact wrench? very limited stores 5 yrs ago
x4 circle saw? very limited stores 2 yrs ago
vacuum? thats a good one, but that was 2017 and only in limited stores
orbital sander? 2017 and semi limited stores.
air comp
16ga straight finish nailer

those are your .03/75% ridgid deals over a five year span.
that cannot compare to milwaukee dewalt or even makita's 2018 deals alone

X4 circ saw $25
X4 recip saw $50
X5 recip saw $45
X5 impact w/ 2 batts $50
X5 impact & circ saw w/ 2.0 & 4.0 batts $60

As others have said, Milwaukee deals are few and far between in most places. Ridgid line is not the biggest nor is it the best quality, but it is really good quality. And I have found FAR more deals on them than Milwaukee or Dewalt.

 

[kball]

I got this last April for $50.03 or $53.03 but its the only Ridgid 03 deal I've seen. The sad part is I don't even have batt's for it. I keep hoping I'll find a deal on some batteries and a charger but nope...

 

[12three]

I got this last April for $50.03 or $53.03 but its the only Ridgid 03 deal I've seen. The sad part is I don't even have batt's for it. I keep hoping I'll find a deal on some batteries and a charger but nope...

the dewalt compressor is still .03 at some stores with a 6.0flex and a fast charger for 75.03

 

[12three]

X4 circ saw $25
X4 recip saw $50
X5 recip saw $45
X5 impact w/ 2 batts $50
X5 impact & circ saw w/ 2.0 & 4.0 batts $60

As others have said, Milwaukee deals are few and far between in most places. Ridgid line is not the biggest nor is it the best quality, but it is really good quality. And I have found FAR more deals on them than Milwaukee or Dewalt.

well grab a milwaukee hackzall kit now and rr your way to .03 friend
the mid torque impact wrench kit is only a .00 step behind it..
pretty sure those are national and leftover from fathers day or so

 

[winlinmac]

well grab a hackzall kit now and rr your way to .03 friend

the mid torque impact wrench kit is only a .00 step behind it..

pretty sure those are national and leftover from fathers day or so

What’s the SKU # for the Hackzall kit?

 

[ChrisLS8]

What is all this .03/.06/.00/.09 talk in here? A way to track what's going to go on sale?

 

[mcchazo]

I got this last April for $50.03 or $53.03 but its the only Ridgid 03 deal I've seen. The sad part is I don't even have batt's for it. I keep hoping I'll find a deal on some batteries and a charger but nope...

Missed a good one

Sent from my Pixel XL using Tapatalk

 

[Dh3256]

There's a reason you don't see Ridgid tools on the jobsites, because they break and don't perform as good as Dewalt or Milwaukee.

May be a local thing, around here Ridgid is the most common on job sites, with some Milwaukee but very rarely DeWalt (Black and Decker).

BTW, the warranty is different than the Lifetime Service Agreement, which does not have the limitations you noted.

 

[drwheels]

I got this last April for $50.03 or $53.03 but its the only Ridgid 03 deal I've seen. The sad part is I don't even have batt's for it. I keep hoping I'll find a deal on some batteries and a charger but nope...

That was a weird deal. One store had them at that price for about a week. echo hedge trimmer went to 03 but they all went away. Milwaukee sawsall corded went from$135.00 to $120.00. Shows $75.03 on pca.

 

[illus101086]

What is all this .03/.06/.00/.09 talk in here? A way to track what's going to go on sale?

Probably should go to the beginning of thread it will explain all of it for you.


Sent from my iPhone using The Garage Journal mobile app

 

[GortonsFisherman]

There's a reason you don't see Ridgid tools on the jobsites, because they break and don't perform as good as Dewalt or Milwaukee.

Only time I even run into Ridgid cordless on a job site - or Ryobi, for that matter - is the occasional handyman type. As a contractor, performance is what I care about, not length of the warranty.

 

[Stea1thNinja]

What is all this .03/.06/.00/.09 talk in here? A way to track what's going to go on sale?

I was curious as well and found the link you are looking for on page five. Would repost it here but do not have enough posts yet.

 

[one9gt]

I was curious as well and found the link you are looking for on page five. Would repost it here but do not have enough posts yet.

Boils down to the number of weeks left before the item pennies out ... .00 is manager/corporate driven pricing special... most times they’ll stay at .00 forever


Sent from my iPhone using Tapatalk

 

[jits1980]

Hdx plumbing tools .03 pricing


Sent from my iPhone using Tapatalk

 

[bmoore1]

Half off

Sent from my Pixel XL using Tapatalk

 

[bigdaddyisu]

Half off

Sent from my Pixel XL using Tapatalk

Wish I could find that in my area, virtually all the 18v tools have been gone from the stores for months and I refuse to jump to a 20v platform.

 

[Mctiger1985]

Various Real Solutions pullouts at 03

 

[Zestomite]

Did anyone ever catch a clearance or did it even clearance? The makita X2 tracksaw? No one around me sells it and I know they clearanced most X2 tools. I found one store that still has a couple and some of the rails but they said it still is $499?
Any info or posts about this?

 

[superskaterxes]

Wish I could find that in my area, virtually all the 18v tools have been gone from the stores for months and I refuse to jump to a 20v platform.

the first time you use 20v you will throw all your 18v stuff in the trash........

 

[iwantansi]

the first time you use 20v you will throw all your 18v stuff in the trash........

The 20V stuff is nice because its newer and has available features(brushless, LEDs, torque control, etc) that the 18v doesnt... but there isnt a reason to just throw it all away. I've got 4 or so li-ion batteries for the 18v system and it makes the system stable(as opposed to having nicads)

now... I am slowly picking up 20v stuff as I see it on sale here and there... and not sure what to do with the 18v stuff since it doesnt fetch high $$$ on ebay

 

[stephenabs]

The kit with 2 batteries and dual charger got as low as $225 at my local store. The 55" track went to $25.03 and were gobbled up quickly at that price. Folks prob using them as a straight edge at that price. I would ask them to scan any that you see in store, I don't think these are store stocked items anymore.

Did anyone ever catch a clearance or did it even clearance? The makita X2 tracksaw? No one around me sells it and I know they clearanced most X2 tools. I found one store that still has a couple and some of the rails but they said it still is $499?
Any info or posts about this?

 

[Zestomite]

The kit with 2 batteries and dual charger got as low as $225 at my local store. The 55" track went to $25.03 and were gobbled up quickly at that price. Folks prob using them as a straight edge at that price. I would ask them to scan any that you see in store, I don't think these are store stocked items anymore.

Man... I wish I could find at that price! I have about 3-4 stores near enough to drive that show stock. Scanning them is still coming up $499 so far

 

[12three]

Various Real Solutions pullouts at 03

im still finding an abundance of penny drawer slides when i venture out to stores off my reg path.
theres not much to them beyond the slides, so you might be able to save even more if you look in the hardware aisle

 

[bigcountry978]

Found some stocking stuffers today lol

Sent from my SM-G950U using Tapatalk

 

[emachado]

im still finding an abundance of penny drawer slides when i venture out to stores off my reg path.

theres not much to them beyond the slides, so you might be able to save even more if you look in the hardware aisle

I will check! I make cabinets!


Sent from my iPhone using Tapatalk

 

[Zestomite]

Well call me crazy but I really wanted that X2 tracksaw so. I brick seek to for anywhere within two hours that showed inventory and clearance price. I found a store that had 2 saws and 6 tracks.

I bought 2 saws and four tracks for $634 ($250 saws, $25 tracks). So I have to make a four hour round trip on Saturday but they are all waiting for me.

Not sure the plan. Sell half and get mine free, keep one saw and 4 batteries and sell the other saw charger and tracks? Or give it at discounted price to my boss? We will see

 

[tabs]

Not sure the plan. Sell half and get mine free, keep one saw and 4 batteries and sell the other saw charger and tracks? Or give it at discounted price to my boss? We will see

im a fan of the sell half and get mine free line of thinking. thats what i usually try to do
though if you sell to your boss, i say charge him double

 

[2manytools]

Original post removed.

Sku on this is 561159. Was told to use a Bonide product that works better. Won't be using until next year though now

 

[drwheels]

Various Real Solutions pullouts at 03

Most of that at 00 or 06 at my area store. Milwaukee and dewalt replaced 12 hammers and hatchets. The one on clearance are at 00.

 

[Ohiost]

Well call me crazy but I really wanted that X2 tracksaw so. I brick seek to for anywhere within two hours that showed inventory and clearance price. I found a store that had 2 saws and 6 tracks.

I bought 2 saws and four tracks for $634 ($250 saws, $25 tracks). So I have to make a four hour round trip on Saturday but they are all waiting for me.

Not sure the plan. Sell half and get mine free, keep one saw and 4 batteries and sell the other saw charger and tracks? Or give it at discounted price to my boss? We will see

Great deal. I’ve been looking but none in my area. I’d like to find a few of the tracks for $25. I have a Festool track saw but use makita tracks

 

[Bzrollin]

Echo cordless hedge trimmer finally down to .03

 

[drwheels]

1001481686 packout at $200.00. Is this a good buy?

 

[2manytools]

M18 FUEL ONE-KEY 18-Volt Lithium-Ion Brushless Cordless 3/8 in. Impact Wrench w/ Friction Ring Kit w/(2) 2.0Ah Batteries - $185

ship to store only

 

[2manytools]

1001481686 packout at $200.00. Is this a good buy?

Bottoms go for $90-$100 around me on CL. I bought the large middle for ~$50 off ebay/CPO earlier this year. $200 is not a terrible price to get it all together, but might be able to do better pieced out.



nm. that is the Packout with drill/impact. Yes that is a good deal, please grab me one

 

[drwheels]

Bottoms go for $90-$100 around me on CL. I bought the large middle for ~$50 off ebay/CPO earlier this year. $200 is not a terrible price to get it all together, but might be able to do better pieced out.



nm. that is the Packout with drill/impact. Yes that is a good deal, please grab me one

It is same sku as hard case at one store.$309.00 online at hd

 

[Poe34]

Echo cordless hedge trimmer finally down to .03

Not here, and that .03 is from March! That should be a penny by now. Did you purchase it?

 

[yosh2000]

Boom baby

 

[Bzrollin]

Not here, and that .03 is from March! That should be a penny by now. Did you purchase it?

March is when it first went on clearance. I’ve been watching this sit at mostly .00 pricing since then because they’ve been in the overheads with no display in all my stores. The store I went to just happened to have these pulled down and priced, but they were at .06 pricing last week.