2018 Tractor Supply Clearance thread...

[leftyz]

Just grabbed a truper wooden handled 10lb Sledge hammer for $8.49 in the clearance section

Sent from my ONEPLUS A5000 using Tapatalk

 

[rpcraft]

I just picked this up today. Seems like a good deal. Seems like it has enough oomph to run the small Hf blast cabinet and all my other junk (@11.5 CFM at 90 PSI). \

https://www.tractorsupply.com/tsc/p...20181122-_-2+Day+Sale-_-DeWALT+Air+Compressor

Tax price was 439 (ish) and I could have gotten free delivery but I wanted to go ahead and get it today so I can start piecing together a proper manifold and filter/moisture setup. Any recomendations on those pieces would be greatly appreciated.

 

[Spdfreak91]

I just picked this up today. Seems like a good deal. Seems like it has enough oomph to run the small Hf blast cabinet and all my other junk (@11.5 CFM at 90 PSI). \

https://www.tractorsupply.com/tsc/p...20181122-_-2+Day+Sale-_-DeWALT+Air+Compressor

Tax price was 439 (ish) and I could have gotten free delivery but I wanted to go ahead and get it today so I can start piecing together a proper manifold and filter/moisture setup. Any recomendations on those pieces would be greatly appreciated.

I bought the same one, had it on "layaway" and picked it up friday, I was thinking milton 3/8 NPT filter and regulator just dont know about the piggyback vs seperates

 

[rpcraft]

I was going to try and run everything half inch where possible and I have some quick disconnects that are 3/8 but most of my older ones are all 1/4 and it is proving a little challenging finding the 3/8 adapters locally. All my hoses are 3/8 except one of the umbilicals I have for hooking up the blower attachments and it's 1/4. Is there a reason to really run the 3/8 adapters, since the 1/4 adapters are so much more commonly available? Not sure if it will create a bottle neck or if it is the overall volume that helps keep the CFM up...

 

[Jarcese]

I grabbed the same compressor. Seems to have good reviews on TS website. None in store so I paid for delivery. They also had some Ingersoll and Campbell Hausfield tools and fittings on clearance. They are probably making way for Dewalt tools.

Sent from my SM-G930P using Tapatalk

 

[fartymarty]

I just picked this up today. Seems like a good deal. Seems like it has enough oomph to run the small Hf blast cabinet and all my other junk (@11.5 CFM at 90 PSI). \

https://www.tractorsupply.com/tsc/p...20181122-_-2+Day+Sale-_-DeWALT+Air+Compressor

Tax price was 439 (ish) and I could have gotten free delivery but I wanted to go ahead and get it today so I can start piecing together a proper manifold and filter/moisture setup. Any recomendations on those pieces would be greatly appreciated.

Looking over the specifications in the link above, it says " Pump Life: 1000 hours"
That's got to be a misprint/typo....right?

 

[rpcraft]

Looking over the specifications in the link above, it says " Pump Life: 1000 hours"
That's got to be a misprint/typo....right?

I can't recall where I saw it but I thought I saw something along the line of 10,000 or 100,000 hours? I am sure that is a mis-print at the very least but most of the warranty is relative to time and not hours (meaning 2 year limited warranty on the pump).

 

[chipdog4]

All Campbell Hausfield fittings and air tools are on clearance (looked like %25 off) and about half the Ingersol Rand was on clearance, too.

This welding table thing was $49 down from $69.
https://www.tractorsupply.com/tsc/product/olympia-adjustable-steel-welding-table?cm_vc=-10005

Forgot this little tool cart was clearance, too. Around $50 ish

https://www.tractorsupply.com/tsc/product/performance-tool-industrial-shop-cart?cm_vc=-10005

 

[cajunfirehawk]

OK, 2018 is done, lets post in the 2019 TSC deals thread below, thanks!
https://www.garagejournal.com/forum/showthread.php?p=7629099#post7629099

 

[bubinga]

OK, 2018 is done, lets post in the 2019 TSC deals thread below, thanks!
https://www.garagejournal.com/forum/showthread.php?p=7629099#post7629099

OK Got It!
Will Do!