z385488: the tractor setup saved some serious heartache as I was able to lift each one directly in place, probably could'nt have done it without it as each truss weighs nearly 400 lbs. Another big help is to cut pole sections and fasten them between the double truss carriers that way you have something solid to nail to and avoid toe nailing altogether.
The heat has been awful! 100+ nearly every day for the past three weeks, as far as posting the pics, it was a bear. I was up until 2 last night trying to figure out the security token deal. I ended up just uploading one or two at a time then it finally took.
MG30: The layout is an enclosed 30x30x10 main shop with 3/0 entry door, 12x8 garage door, and an 8x8 garage door in that order on the front gable wall. The lean-to will be 10' wide and run the full length of the left eave wall (as your looking at building in the picture). The attic space is 14' wide and 7' 3" headroom in the center. As far as finish it will have wainscoting, 6 exterior vinyl windows and 12" overhangs.