To avoid these ads, REGISTER NOW!

5 Gallon Plastic Gas Can

P

padroo

Well-known member
Joined
Nov 25, 2011
Messages
564
Location
Chesterton, In.
Who makes the best plastic five gallon gas can. I have a couple of the Blitz brand that you see everywhere and they don't have a vent hole and it is aggravating trying to fill up my wife's zero radius mower because it holds ten gallons.

You notice, I said my wife's zero radius. The secret to a perfect lawn is to by your wife a shiny new mower. :lol_hitti
 
To avoid these ads, REGISTER NOW!
M

mrvm

Well-known member
Joined
Feb 12, 2014
Messages
3,840
Location
PA
Today's plastic gas containers are all effed up. Might consider this kit which includes a vent:

EZ-Pour HI-FLO Replacement Spout Kit 30051

hi-flo-bag_1.jpg
 
M

Mgraves235

Well-known member
Joined
Dec 11, 2011
Messages
54
Location
Crossett, Arkansas
We've started drilling holes and installing tire valve stems with the core removed in all our fuel cans, opposite the pour spot. It also allows a bit of flow control by tightening or loosening the valve cap.
 
M

M6erfan

Well-known member
Joined
Dec 6, 2014
Messages
10,170
Location
'Merica!
mrvm said:
Today's plastic gas containers are all effed up. Might consider this kit which includes a vent:

EZ-Pour HI-FLO Replacement Spout Kit 30051

hi-flo-bag_1.jpg
Click to expand...

This^^^^ I've converted some of my plastic cans with these. Honestly they're pricey IMO for what they are but I haven't found a better alternative for the plastic cans.

I try to pick up old plastic gas cans at garage sales and, if needed, convert them with the product above.
 
C

CJM8515

Well-known member
Joined
Mar 8, 2014
Messages
9,302
Location
NJ
Valve stem will wear out from the gas sooner or later. Ive used those kits with great success. I prefer scepter brand cans over anything else.

On the other hand I have been hoarding old style gas cans like no tomorrow :)
 
E

erty67

Well-known member
Joined
Sep 30, 2012
Messages
1,151
Plenty good old ones can be found at yard sales and swap meets. New ones sold in stores are junk.

Sent from my HTCONE using Tapatalk
 
F

FullRaceMerc

Well-known member
Joined
Jan 9, 2015
Messages
3,857
Location
SoCal (SGV)
It's metal, but at work we use these. Link The cover is spring loaded & the handle to open it is lined up so you can hold the main top handle & pull the lid open with one hand while the other supports the bottom of the can. You line up the funnel in the filler neck then open the can for flow. Next time I buy one for home I'll probably get one of these.
71xCfgVKs5L._SY355_.jpg


At home, since I have already bought different types of difficult to pour gas cans, I use a shaker siphon. Link The check valve has a ball inside. Shaking the end back & forth moves the ball & gets the flow started. So you put the can up on something, place the check valve in the fuel, shake the ball up & down to get it started, then gravity does the rest. It flows pretty well. It works in many types of gas cans.
31Z6jEf5AUL._SY355_.jpg
 
To avoid these ads, REGISTER NOW!
P

Ponchoguy

Banned
Joined
Jul 27, 2014
Messages
3,399
FullRaceMerc said:
It's metal, but at work we use these. Link The cover is spring loaded & the handle to open it is lined up so you can hold the main top handle & pull the lid open with one hand while the other supports the bottom of the can. You line up the funnel in the filler neck then open the can for flow. Next time I buy one for home I'll probably get one of these.
71xCfgVKs5L._SY355_.jpg


At home, since I have already bought different types of difficult to pour gas cans, I use a shaker siphon. Link The check valve has a ball inside. Shaking the end back & forth moves the ball & gets the flow started. So you put the can up on something, place the check valve in the fuel, shake the ball up & down to get it started, then gravity does the rest. It flows pretty well. It works in many types of gas cans.
31Z6jEf5AUL._SY355_.jpg
Click to expand...

I have the older version of that can called "The Gasser". It's like using a metal garbage can for gasoline. LOL. Of course, Eagle doesn't make any parts for it since it's not a safety can....
 
P

Ponchoguy

Banned
Joined
Jul 27, 2014
Messages
3,399
padroo said:
Who makes the best plastic five gallon gas can. I have a couple of the Blitz brand that you see everywhere and they don't have a vent hole and it is aggravating trying to fill up my wife's zero radius mower because it holds ten gallons.

You notice, I said my wife's zero radius. The secret to a perfect lawn is to by your wife a shiny new mower. :lol_hitti
Click to expand...

Blitz is out of business, Hopkins Mfg (of trailer connector and snow brush fame) bought them out from what I remember.
 
T

Tdbo

Well-known member
Joined
Dec 20, 2009
Messages
166
Location
Central Ohio
mrvm said:
Today's plastic gas containers are all effed up. Might consider this kit which includes a vent:

EZ-Pour HI-FLO Replacement Spout Kit 30051

hi-flo-bag_1.jpg
Click to expand...

These sets are fantastic but are $10. a pop.
When I am forced to buy a new gas can, I buy one of these as well
Usually try to keep one ahead when I find them on sale.
I have also converted all my older non-vent cans to vented.
Bought some of the yellow vent caps on ebay. Cans work well now.
 
D

Dick in Wisconsin

Well-known member
Joined
Mar 3, 2012
Messages
3,048
Location
Shawano, Wisconsin
Mgraves235 said:
We've started drilling holes and installing tire valve stems with the core removed in all our fuel cans, opposite the pour spot. It also allows a bit of flow control by tightening or loosening the valve cap.
Click to expand...

CJM8515 said:
Valve stem will wear out from the gas sooner or later. Ive used those kits with great success. I prefer scepter brand cans over anything else.
Click to expand...

PelicanPines said:
You win the internet prize today. I'm so gonna steal that method. :beer:
Click to expand...

I think there is another thread about this on the GJF and there was a link to a video (probably YouTube) about how to do it. I think the trick is to use all steel valve stems in the cans so the gas doesn't deteriorate the rubber in the valve stems. I have bought the valve stems, but never got around to installing them. The expensive VP race gas jugs work well, have seen many of the being used at the track, but they are expensive!
 
OP
P

padroo

Well-known member
Joined
Nov 25, 2011
Messages
564
Location
Chesterton, In.
Thanks guys, I usually go straight to the Internet with my questions but GJ came through this time.

A lot of good ideas.
 
A

anndel

Well-known member
Joined
Oct 28, 2015
Messages
3,270
Location
Hawaii, USA
I have a plastic can from Wal mart and it leaked. I bought 2 Justrite cans from Amazon several years ago and still works and haven't leaked yet.
 
W

WarDamnEagle

Well-known member
Joined
Mar 13, 2009
Messages
208
Location
Auburn
Not to belabor this discussion but the Justrite can is the only one I found on the market with positive shutoff of the flow. The inlet to the nozzle has a tight sealing valve which is controlled by a lever adjacent to the handle. You squeeze the lever (easy to do while holding the handle) to start and stop the flow. No having to tip the can back and forth to start and stop the flow.

It is by far the easiest gas can I have ever used.
 

Attachments

  • Justrite Can.jpg
    Justrite Can.jpg
    8 KB · Views: 26
M

manwithtools

ALLIANCE MEMBER
Joined
Aug 24, 2015
Messages
13,914
Location
Lebanon, TN
There's a new kid on the block - Surecan - they are plastic with a thumb operated pour spout that is articulated and easy to use particularity in hard to get to tank locations.

They are made local to me in Lebanon, TN.

https://www.surecanusa.com/#feature

2.2 gal gas, 5 gal gas and 5 gal diesel models are available. I bought one of the 2.2 gals last week and it's awesome for chain saws, leaf blowers, etc.

Surecan-Gas-Can-Feature-770x472.jpg


They are elf ventilating and you don't have to tip the container. The fuel comes out the bottom. These are better than any gas cans I have - including the ones with the valve stem modification.
 
Last edited:
J

Jamie V

Well-known member
Joined
Jun 10, 2012
Messages
1,059
Location
Atco, NJ
660feff1b69b69e5ed493671de9c67ca.jpg

VP jugs all the way. They have screw on vent caps and you can even get a pump for them.

1de328384dfc8ada4ed51ed472d97f11.jpg

I have the pump and you can even spin it in reverse and **** another jug empty!
 
V

valentine

Well-known member
Joined
Oct 27, 2008
Messages
239
Yeah those VP jugs are great. I have red ones for gas and pink for diesel. Get extra caps so you can leave the filler hose attached to the extra cap. That way when its time to pour, you don't have to remove the plug from the cap, screw in the hose, pour the fuel, remove the hose from the cap again and then re-install the plug in the cap. Its much easier to just have an extra cap with the hose already in it. Also, the VP jugs actually hold about 6 gallons instead of just 5 so I like that about them too.

-Valentine
 
M

MrGiggles

Well-known member
Joined
Dec 11, 2014
Messages
2,524
I have a 6 gallon jug with the vent in the spout. It takes forever even when it's working properly, and frustrating while wrestling a 40lb can.

I drilled a hole and threaded in a 1/4-20 bolt. Remove the bolt when pouring the whole can, or leave it in while filling smaller tanks.
 
D

decableguy2000

Well-known member
Joined
Nov 4, 2012
Messages
652
Just get some vents off Ebay. Have the EZ pour on my diesel can works great. I think they sell vents on their site also.

Jeremy
 
T

turfgnome

Well-known member
Joined
Jun 30, 2013
Messages
258
Ponchoguy said:
Blitz is out of business, Hopkins Mfg (of trailer connector and snow brush fame) bought them out from what I remember.
Click to expand...

No blitz went bankrupt due to lawsuits.


Apparently it is dangerous to poor gas on a open fire using a blitz can. :lol_hitti

We had an American made gas can until lawsuits over stupid people put it out of business.
 
B

Bigstevex4

Member
Joined
Nov 4, 2015
Messages
11
Location
Spearfish SD
Mazdaratti3 said:
The only plastic ones worth buying new are the No-Spill brand.
They actually work really well.
I personally like them better than old vented ones because you can hold them in the pour position and then open the valve slowly.
They are a little pricey but worth it as far as I'm concerned.

http://www.amazon.com/dp/B000W9JN4S/?tag=atomicindus08-20
Click to expand...

Yes they work good except you need to cut that stupid lock tab off the cap.
 
T

theoldwizard1

Well-known member
Joined
Feb 22, 2011
Messages
43,191
Location
SE MI
turfgnome said:
We had an American made gas can until lawsuits over stupid people put it out of business.
Click to expand...

While stupid lawsuits did not help, the real killer was the California Air Resources Board. Too many hydrocarbons being released into the atmosphere from refilling your small gasoline engine with a can that has a vent and a spout that is not self closing.
 
T

theoldwizard1

Well-known member
Joined
Feb 22, 2011
Messages
43,191
Location
SE MI
The No-Spill Gas Can is great for a can that you can hold in the pour position with 1 hand ! I want to see No Spill Jill demo a 5 gallon can.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom