I bought a gallon of acetone for some spraying projects and the cap never properly threaded onto the spout. Every time I opened or closed it, there was a certain amount of finagling involved. I got a little frustrated and took a pair of channel locks to get it open. Of course this made the cap and spout oblong. I tried shaping it back but it just won’t seal.
The container is 90% full.
I’ve got an empty acetone quart container I can dump some of this into.
I also have an metal mineral spirits container. Can I clean that container out (swirl it with acetone) and pour the remaining acetone into the mineral spirits container.
The mineral spirits container has a plastic spout and the acetone container has a metal spout.
Thanks
The container is 90% full.
I’ve got an empty acetone quart container I can dump some of this into.
I also have an metal mineral spirits container. Can I clean that container out (swirl it with acetone) and pour the remaining acetone into the mineral spirits container.
The mineral spirits container has a plastic spout and the acetone container has a metal spout.
Thanks

