To avoid these ads, REGISTER NOW!

Adding on to existing pole building

Qyota

Member
Joined
Jan 11, 2015
Messages
16
Location
Northern MN
Hello GJ friends.

I have a 24x30x10 pole building that I'd like to add on to. The 24' side is the gable end, and I want to build off that end (opposite the main 16' overhead door). This space will be used for storage of a 16' camper (that is about 9 feet tall at it's tallest point, and doesn't currently fit through the 16' door), motorcycle on a lift, and various other things, including a space for lounging. I want this to be insulated, and heated on-demand. The rest of the existing garage need not be insulated or heated at this time.

So, my options are to sort of extend the existing roofline and pitch, continuing on with a 3-sided extension similar to the existing structure. OR, build on a 3-sided stick-built building that "tucks in" under the existing gable end (16" eve), and is slightly shorter in height. I like this option because I can get the slab poured, and then build it largely myself as I have time.

The big deal is getting the camper in and out. With it's height, I'd probably need to put the door on the gable end of the addition, even though I'd like the door on the side. Once you put in a header over the door opening, it really starts to crunch the vertical space. I don't need an over-head door, which I know ***** up even more vertical space, so a slider or even a carriage style would work. It wouldn't be open all that often, and it needs to be insulated well.

I'll take a photo tonight when I get home so you can envision it.

I'm thinking 24x24 in size, with as tall a wall as I can get away with (hopefully a 10' door opening).

Thanks for your help! :beer:
 
To avoid these ads, REGISTER NOW!
OP
Q

Qyota

Member
Joined
Jan 11, 2015
Messages
16
Location
Northern MN
Some photos:
870c33314de5b4c832b6e8f53127bbcb.jpg


05ea2a26851c62c1f4bbd75c8908c568.jpg
 
To avoid these ads, REGISTER NOW!

MagKarl

Well-known member
Joined
Oct 15, 2012
Messages
684
Location
Olympia, WA
Doesn't look tall enough. Maybe you could add on but make your addition taller than your existing building.
 

dfiler2

Well-known member
Joined
Dec 15, 2014
Messages
2,858
Location
NW Minnesota
IMO, I would go 2' wider and 2' taller. You could do as you planned and pour a slab 1' wider on each side, then build stick as you have time. Either way you will need to remove the existing overhang of the original building. I always think it looks better to make an addition slightly larger or smaller, it gives the building character and looks like it was planned.
 
To avoid these ads, REGISTER NOW!
Top Bottom