Aluminium container insulation

[jabberwoki]

So i have an uninsulated 20 ft aluminium container that i want to spray something on the insides to help with condensation.
I was thinking undercoating but i`d need it to be a light color or paintable so it's not to dark also cheap as it's a big area.
Whatdoyareckon?

 

[ez-duzit]

You'll need thick insulation--not a thin undercoating.

 

[nadogail]

How about rigid foam sheets with a foil covering? They get glued in place.

 

[ez-duzit]

How about rigid foam sheets with a foil covering? They get glued in place.

Condensation will form wherever the insulation is not fully contacting the aluminum.

 

[NOEYEZ]

Spray on Bed liners can be acquired in many colors.....Can you tell us what you will use it for? This might help us to zero in on what you truly need...

 

[jabberwoki]

Car storage so it needs to be dry.
, so trying to stop condensation from forming on the walls and ceiling

 

[phred]

Spray foam.

 

[Bondo]

So i have an uninsulated 20 ft aluminium container that i want to spray something on the insides to help with condensation.
I was thinking undercoating but i`d need it to be a light color or paintable so it's not to dark also cheap as it's a big area.
Whatdoyareckon?

Ayuh,.... An inch of spray-on closed cell insulation will do exactly what yer lookin' for,.....

 

[jabberwoki]

Can this be done by me? Or do I have to hire it out?

 

[BillK]

If you are not worried about the temperature I would bet that a small roof vent and a fan to keep air moving would be much better at keeping the condensation down.

 

[65ranchero]

They have kits that are DYI but it get expensive because i think a kit does not cover much area.
Plus I suggest a respirator.
A local insulation Co. can knock that off fast.
There is this:

InSoFast Products for Container Use | InSoFast Insulation Solutions

Please refer to the Resources section for Detail Drawings, Physical Properties and other helpful information about how to insulate your

www.insofast.com

 

[dshop]

get a local pro to shoot the spray foam One and done...this is a specialized application that requires proper equipment and the expertise to apply it successfully. Your health will be safe, your building will be safe and all is good.
If you want to spend more money and risk your health, DYI.

 

[jabberwoki]

Righto, i`ll look into it.
Ta.