I'll have to check the code, but I believe you can use PVC at a depth of 18" or more. If I'm wrong, it would hardly be the first time.
Amazon Deals on New Retail Items - Post them!
- Thread starter vwpieces
- Start date
The
However it is still a wet location and requires wires rated as such.
The conduit is to protect the cable.
However it is still a wet location and requires wires rated as such.
300.38 Raceways in Wet Locations Above Grade.
The rooftop raceway is installed in a wet location above grade. The interior of the raceway is considered to be a wet location. Are there any code violations in the image? Hint: Label.
www.electricallicenserenewal.com
zeekh
Well-known member
Would that be THHN?
Boogerman
Well-known member
Thhn is usually dual rated also as thwn. If it shows the thwn rating, it is suitable for wet locations, otherwise not. There's also a derating that applies, if it is used in wet loctions.
Chuckster in NJ
Well-known member
THHN can NOT be used in a wet location…….. Hire a pro because there is a lot of misinformation here.
BTW! I thought this was a deal thread.
Reminder guys... discussion is fine, but full blown conversations don't belong here...
Flexzilla Air Hose, 3/8 in. x 25 ft., 1/4 in. MNPT Fittings, Heavy Duty, Lightweight, Hybrid, ZillaGreen - HFZ3825YW2 https://www.amazon.com/dp/B0021WVO8W?tag=atomicindus08-20
$15.98
90 day buy box average is about 24 bucks.
$15.98
90 day buy box average is about 24 bucks.
Tinkerer2
Well-known member
Perfect - ThanksFlexzilla Air Hose, 3/8 in. x 25 ft., 1/4 in. MNPT Fittings, Heavy Duty, Lightweight, Hybrid, ZillaGreen - HFZ3825YW2 https://www.amazon.com/dp/B0021WVO8W?tag=atomicindus08-20
$15.98
90 day buy box average is about 24 bucks.
Now if they would just put the 3/8 x 50 ft 4200 psi pressure washer hose on sale, I'd have all the Flexilla hoses I need.
TxSteve
Well-known member
Grabbed one. That's cheaper than the HF version.
Crabman
Well-known member
I thought I didn’t need one myself until I remembered I am adding an air tank and compressor to the truck. This will be a perfect road hose. Thank you to @Tinkerer2 and myself for posting the sale.
GEDORE 8314-125 TL Side Cutter – 5-Inch / 125 mm – Diagonal Wire Cutting Pliers – Extra Hard Steel Cuts Wire up to 1.6 mm – Professional Grade, red Handle https://www.amazon.com/dp/B08819DLFF?tag=atomicindus08-20
$12.35 / made in Austria / typically about $20.
$12.35 / made in Austria / typically about $20.
I need to cut through a few hundred holes so we'll see how the clones stack up:
Last edited:
Astro 78618 Brake Caliper Wind Back Tool Set - 18 Piece
Limited time deal$33.53
Lowest price since 2022 per camelcamelcamel
There's other similar, cheaper options but a good price for Astro's
Been a tech for over 30 years. The cube works well 80% of the time. You can just screw the piston back in. The astro kit allows pressure to be applied from the tool to the piston while turning. This allows some of the sticky pistons to fully seat easier. I have both in my tool box.
I reckon the cube works well for the applications that fit it. I have a clone of the kit above (I think I pad like 15 bux so there's better deals out there). Build quality is garbage and I ended up breaking one of the locating pins so now I have two of the above kits. I wasn't the happiest camper w/it but YMMV.
We use dyes for certain oils, (like ATF is dyed)
First time dealing with that stuff I go what I thought was barely any on my gloves. It got my hands green. Wiped it off, so I thought...
paperwork, pen, my phone, my hat, truck door, steering wheel, gear knob, etc all got green marks.
I got one recently that's solid tool steel. Was maybe $30.
gator 'something' makes some nice steel ones for around that much and have awesome 'master kits'. Nice product if you use it enough. the hardened bushings on this alternative are all one piece embedded in nylon so I'm not super worried about the bits not tracking or this falling apart. Won't hold up to hot metal too well though. The grip ergo is an added bonus. I don't know how well tool steel holds up though I'd prefer hardened steel bushing if available (don't know if the gator ones have a bushing insert or not).
yes, that's it. They have several models so make sure you get metric/imperial in the sizes you need. I think their master kit is like 200 bux. It looks like WEN also started making a product at half the price (3/8 max).
reviews appeared to be gamed/lumped w/a different product; perhaps avoid
Just a correction. This particular model does not appear to have hardened steel bushings. Milescraft does have an upgraded 'drill block +' w/more holes and hardened bushes. Kreg does too (w/hardened bushes). Here are some of the features I was unaware of until just now for the Mastercraft series (centering notches apply to WEN above as well):
Last edited:
Madjik Man
Well-known member
- Joined
- Dec 3, 2015
- Messages
- 1,521
GEDORE 8314-125 TL Side Cutter – 5-Inch / 125 mm – Diagonal Wire Cutting Pliers – Extra Hard Steel Cuts Wire up to 1.6 mm – Professional Grade, red Handle https://www.amazon.com/dp/B08819DLFF?tag=atomicindus08-20
$12.35 / made in Austria / typically about $20.
Shoot. I wasn’t quick enough.
Chrome Vanadium Cody
Well-known member
- Joined
- Jul 25, 2021
- Messages
- 663
Similar price at KC Tool: https://www.kctool.com/gedore-8314-125-tl-side-cutter-125-mm/
Madjik Man
Well-known member
- Joined
- Dec 3, 2015
- Messages
- 1,521
Saw that. But $8 shipping.
Then I saw the more comfort grip one at Zoro…. And down the GJ rabbit hole I go, lol
Chrome Vanadium Cody
Well-known member
- Joined
- Jul 25, 2021
- Messages
- 663
Yeah this made me realize how good the prices are on Austria-made Gedore pliers. Dangerous!
zeekh
Well-known member
Interesting, I think Lowes had that at half that price during the winter. I have that tool and like it alow.
PugetDude
ALLIANCE MEMBER
The 12 packs of the Cle-line 1/8" bits were down to $0.99 this morning. Just ordered a bunch.
Mine showed up today. This is my first Gedore red handled tool, all the others I have are blue. It looks to be very well made. Fit & finish is excellent. Thanks for posting this.GEDORE 8314-125 TL Side Cutter – 5-Inch / 125 mm – Diagonal Wire Cutting Pliers – Extra Hard Steel Cuts Wire up to 1.6 mm – Professional Grade, red Handle https://www.amazon.com/dp/B08819DLFF?tag=atomicindus08-20
$12.35 / made in Austria / typically about $20.
General Geoff
Well-known member
I need to cut through a few hundred holes so we'll see how the clones stack up:
These came in. Despite me thinking they'd be clones of one another, the pictures do reflect the physical differences. The cheap one came w/a shorter pilot bit w/poor runout, it also has less meat where the set screw goes so it's easier for it to come off when inserting the bit. Despite that, the cheap one cut through 3/16" mild steel like butter. The brazing was a bit messy so we'll see how long those carbides stay in place. This is a decent deal imo if you don't care to be all that accurate (electrical box holes for instance). I might pick two more.
The 7$ one came w/two pilot bits that were longer and w/much better runout. It seemed to not cut as easy as the cheap one but got the job done just fine. I'll keep both since the cheap one needed a better pilot bit and the pricier one came w/a spare.
I picked this up to chamfer holes, it's for stone but I'll be using it on steel:
Last edited:
Anyone need a t40 bit socket?
WERA 05004924001 8767 B VDE HF TORX® Zyklop bit Socket, Insulated, with Holding Function, 3/8" Drive, TX 40 x 55 mm https://www.amazon.com/dp/B07X4HSWNK?tag=atomicindus08-20
$4.62
WERA 05004924001 8767 B VDE HF TORX® Zyklop bit Socket, Insulated, with Holding Function, 3/8" Drive, TX 40 x 55 mm https://www.amazon.com/dp/B07X4HSWNK?tag=atomicindus08-20
$4.62
Fatboy148!
Well-known member
- Joined
- Mar 11, 2023
- Messages
- 248
Boss Men's 12-Pack String Knit General Purpose Work Glove, Extreme Comfort, Reversible, White, Large (B62081-L12P)
Visit the BOSS Store5.0 out of 5 stars 2 ratings
$5.99 $0.50 per Count
https://www.amazon.com/dp/B0B8P454FR?tag=atomicindus08-20
Lowest price in almost 2 years (since it started tracking)
https://keepa.com/#!product/1-B0B8P454FR
darrowco
Well-known member
50-cents per glove? I'm in - thanks [SIZE=5]Fatboy148![/SIZE] !