Amazon Deals on New Retail Items - Post them!
- Thread starter vwpieces
- Start date
IndyGarage
Well-known member
Doh!!!!Weed eater filament: wet️, dry
3d printer filament: dry
Daytonaer
Well-known member
Koken 1/2 ratchet with release button (4725zb) now $59
link
Not an all time low, but low price and ships free from amazon japan when you use amazon.com Buying from amazon japan puts it about $80 after shipping...
I just sent for one, found it when comparing the gedore kit on zoro for similar $ with 1/2 ratchet.
link
Not an all time low, but low price and ships free from amazon japan when you use amazon.com Buying from amazon japan puts it about $80 after shipping...
I just sent for one, found it when comparing the gedore kit on zoro for similar $ with 1/2 ratchet.
I ordered the 4725ZB from that exact link on 2/25/25 ($57.31). It finally got to me on 3/30/25. It was worth the wait. I think the prices trend towards lower when they are out of stock but due back soon. I seem to get my best Amazon pricing on stuff in that state.
Brandon_oma#692
Well-known member
Right, but I could not drop off at the local ups facility. Where the semi loads are sorted and put on the trucks. It has a small retail storefront that is open select hours for shipping or getting packages held. I also could not give to the driver that picks up everyday at my work. "Final mile" for me was 45 miles each way not counting lunch detour. Had to drive an hour to another town to return, take the wife to lunch 20 minutes further away, then drive back home. Ended being 3.5 hours that I should have been working on customers projects and $60 in fuel and lunch. I would have been money ahead to use then for targets or toss in the trash. Only returned on principal.
PugetDude
ALLIANCE MEMBER
I just got back from dropping off an eBay return. FedEx authorized shipper wouldn't take it ( some BS about the QR code) so I had to take it to Walgreens. The neon haired associate with a full half acre of tattoos and multiple facial piercings was very helpful.
nadogail
Well-known member
Glad to hear a nice comment about an employee of one of my investments.
Piece-it Pete
Well-known member
On chat they've always given me a free printable label so I can give the package to my UPS driver at work, when I've held my ground.
I like to mention Walmart will send Fedex to my house to pickup
Pete
I like to mention Walmart will send Fedex to my house to pickup
Pete
nadogail
Well-known member
Years ago.
Model A Fan
Well-known member
Sounds like you're back in Western Washington?
It may be better to buy the one with the wiring harness, unless you've already got wire or something to use.
NILIGHT LED KIT WITH HARNESS 60W 2PC
Also, now that I received the orange outlets, it turns out they have an isolated ground and are not a "regular outlet, but just orange in color". What do I do with them? They require a separate ground wire per a thread I started in the electrical forum.
PugetDude
ALLIANCE MEMBER
moto_ridah
Well-known member
Just got my outlets in, these are normal 20A receptacles just orange colored, unless you didn't receive CR20-O. The color of receptacle body is not an indication of its use, although it might be common for some industries to use certain colors. The certification requirement for receptacles with Isolated Ground is to have an orange triangle visible on the face of the receptacle. Leviton makes isolated ground receptacles in a variety of colors (including orange) but these are not them.
Isolated Ground
Normal outlet, just orange
To keep this on track... the orange outlets are back in stock but back up to $15.75
Triumph1200
Well-known member
Orange was used in our industry to indicate a dedicated circuit for computer equipment, servers, switches, ect. Nothing else was to be plugged in, otherwise it was just a normal outlet.Just got my outlets in, these are normal 20A receptacles just orange colored, unless you didn't receive CR20-O. The color of receptacle body is not an indication of its use, although it might be common for some industries to use certain colors. The certification requirement for receptacles with Isolated Ground is to have an orange triangle visible on the face of the receptacle. Leviton makes isolated ground receptacles in a variety of colors (including orange) but these are not them.
Isolated Ground
Normal outlet, just orange
To keep this on track... the orange outlets are back in stock but back up to $15.75
PlantItDeep
Well-known member
- Joined
- Jun 16, 2021
- Messages
- 368
Good price if you happen to need 205/70r15
Sailun is good for Chinese tires
$66.01
Sailun is good for Chinese tires
Amazon.com: Sailun Atrezzo SH408 All Season 205/70R15 96T Passenger Tire : Automotive
Buy Sailun Atrezzo SH408 All Season 205/70R15 96T Passenger Tire: Performance - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Sailun Atrezzo SH408 All Season 205/70R15 96T Passenger Tire
thepaddyg
Active member
The load capacity on these tires is . . . terrifying. What can you even use them for!
Chuckster in NJ
Well-known member
A HANGING BIRD FEEDER?
Last edited:
Madjik Man
Well-known member
- Joined
- Dec 3, 2015
- Messages
- 1,521
Thank you.
I don’t need these but ordered them anyway lol. Tekton hard handles are my hands’ favorite. And since they’re disco’d, might as well add to my hard handle collection.
Last edited:
SMOKEYBEAR
Well-known member
- Joined
- Jan 3, 2016
- Messages
- 453
VEVOR Battery Cable Lug Crimping Tool, 10-1/0AWG Aluminum Terminal Battery Lug Crimper, with 60PCS Aluminum Ring Connectors Terminals 6 Wire Sizes Crimping Die, for Heavy Duty Wire Lugs: Amazon.com: Tools & Home Improvement
VEVOR Battery Cable Lug Crimping Tool, 10-1/0AWG Aluminum Terminal Battery Lug Crimper, with 60PCS Aluminum Ring Connectors Terminals 6 Wire Sizes Crimping Die, for Heavy Duty Wire Lugs: Amazon.com: Tools & Home Improvement
www.amazon.com
Last edited:
four.cycle
Well-known member
No thanks.
Avoid "Vevor" like the plague.
It's bad news, @ching0n - seriously:
Please see this thread for details.
Avoid "Vevor" like the plague.
It's bad news, @ching0n - seriously:
Please see this thread for details.
Old Man Roger
Well-known member
I flinched when I saw the insulated screwdrivers from vevor.lol
Ohio Andy
Well-known member
Those have square handles.... That has to be awful to use... I've never seen a screwdriver with square handles
VEVOR Battery Cable Lug Crimping Tool, 10-1/0AWG Aluminum Terminal Battery Lug Crimper, with 60PCS Aluminum Ring Connectors Terminals 6 Wire Sizes Crimping Die, for Heavy Duty Wire Lugs: Amazon.com: Tools & Home Improvement
VEVOR Battery Cable Lug Crimping Tool, 10-1/0AWG Aluminum Terminal Battery Lug Crimper, with 60PCS Aluminum Ring Connectors Terminals 6 Wire Sizes Crimping Die, for Heavy Duty Wire Lugs: Amazon.com: Tools & Home Improvementwww.amazon.com
View attachment 2348575
removed HV drivers.
Old Man Roger
Well-known member
lol I didn’t mean to shame you.
Those insert into the actual handle shown in the box.
no shame, I had my doubts late last night about posting them since you could die if ****** insulation.lol I didn’t mean to shame you.
These came in, level in blow molded case
, tried negotiating partial refund but Amazon issued full refund. At the newer, higher price, go w/another vendor w/the wooden case.Checked squares (all came in single blow molded case) against 123 block and lathe bed and could not see light pass through the gaps. Longest edge against flat bed also no light. Dimensions printed/advertised are a ball park, these were in metric and some dimensions were closer to metric and others closer to imperial (if that matters to you).
https://www.amazon.com/Suwimut-Mach...oodworking/dp/B0DK95H67B?tag=atomicindus08-20 Seller above also has this set for a few dollars more; his product has better rating. I went w/these anyway.
You can pick up some vintage units of such device on ebay for about the same, just no case nor precision scale, just an FYI. I'm setting up a lathe (soon 2 lathes)
raseparter 8 Inch Level Tool Machinist Tool Precision for Machinist, Cast Iron Body - Amazon.com
raseparter 8 Inch Level Tool Machinist Tool Precision for Machinist, Cast Iron Body - Amazon.com
www.amazon.com
Last edited:
Ohio Andy
Well-known member
That makes more sense
The Metric System
Well-known member
- Joined
- Apr 28, 2025
- Messages
- 268
Yost ADI-8 vise currently on sale with a 30% coupon.
This is a lot of very good vise for the money. I've used an ADI-4 for about 5 years and like it more than the USA-Made Reed I have in the same shop.
This is a lot of very good vise for the money. I've used an ADI-4 for about 5 years and like it more than the USA-Made Reed I have in the same shop.
I've seen some in this style (appears to be a similar style of the welded forged unit that's rebadged under different names) bu was unsure if these cast units were any good. Thanks for confirming.
I finally got around to using this thing and it's pretty awesome, those V-grooves are super handy. Had to drill dead centerish into a 1/2" drive shaft and this made it a breeze w/o needing any parallels to raise it. It felt like it did tighten a bit cocked but just gave it an extra cinch and no problem.
The Metric System
Well-known member
- Joined
- Apr 28, 2025
- Messages
- 268
They're legit, I just bought the ADI-8 with the coupon because I've had such a good run with my ADI-4 and the only gripe I've ever had about it was that sometimes the throat depth and opening range wasn't quite enough for whatever I was doing.
I just saw a Wilton (and Vevor) w/reversible Jaw for more throat depth in a similar style.
alwaysFlOoReD
Well-known member
I have a Wilton with the reversable jaw. I picked it up probably 6 years ago at Princess Auto on clearance for $100. Just started using it 6 months ago. Light use so far and haven't needed the reversable option yet. I like the flat anvil.
Lowest price in 1.5 years. Mine is still like new. Project Farm tested hose nozzles recently, and this one came out on top.
https://www.amazon.com/FANHAO-Handheld-Pressure-Spraying-Watering/dp/B07MYWK5RY?tag=atomicindus08-20
JohnKal
Well-known member
In for one. Thanks ATC!
These came in, level in blow molded caseno shame, I had my doubts late last night about posting them since you could die if ****** insulation.
https://www.amazon.com/Suwimut-Mach...oodworking/dp/B0DK95H67B?tag=atomicindus08-20 Seller above also has this set for a few dollars more; his product has better rating. I went w/these anyway.
You can pick up some vintage units of such device on ebay for about the same, just no case nor precision scale, just an FYI. I'm setting up a lathe (soon 2 lathes)
raseparter 8 Inch Level Tool Machinist Tool Precision for Machinist, Cast Iron Body - Amazon.com
raseparter 8 Inch Level Tool Machinist Tool Precision for Machinist, Cast Iron Body - Amazon.comwww.amazon.com
, tried negotiating partial refund but Amazon issued full refund. At the newer, higher price, go w/another vendor w/the wooden case.Checked squares against 123 block and lathe bed and could not see light pass through the gaps. Longest edge against flat bed also no light. Dimensions printed/advertised are a ball park, these were in metric and some dimensions were closer to metric and others closer to imperial (if that matters to you). Each came w/its individual blow molded case so handy to keep around machines.
Last edited:
Making 'custom' tool post holder for atlas 618 compound. These get me 90% of the way there; the nuts are decent deal (if you need 3/4 t-slot & can live w/metric thread) considered shipping; stud not so much but it has the right diameters for me:
